A simulation of winter wheat crop responses to irrigation management using CERES-Wheat model in the North China Plain

To improve efficiency in the use of water resources in water-limited environments such as the North China Plain（NCP）, where winter wheat is a major and groundwater-consuming crop, the application of water-saving irrigation strategies must be considered as a method for the sustainable development of water resources. The initial objective of this study was to evaluate and validate the ability of the CERES-Wheat model simulation to predict the winter wheat grain yield, biomass yield and water use efficiency（WUE） responses to different irrigation management methods in the NCP. The results from evaluation and validation analyses were compared to observed data from 8 field experiments, and the results indicated that the model can accurately predict these parameters. The modified CERES-Wheat model was then used to simulate the development and growth of winter wheat under different irrigation treatments ranging from rainfed to four irrigation applications（full irrigation） using historical weather data from crop seasons over 33 years（1981–2014）. The data were classified into three types according to seasonal precipitation： 〈100 mm, 100–140 mm, and 〉140 mm. Our results showed that the grain and biomass yield, harvest index（HI） and WUE responses to irrigation management were influenced by precipitation among years, whereby yield increased with higher precipitation. Scenario simulation analysis also showed that two irrigation applications of 75 mm each at the jointing stage and anthesis stage（T3） resulted in the highest grain yield and WUE among the irrigation treatments. Meanwhile, productivity in this treatment remained stable through different precipitation levels among years. One irrigation at the jointing stage（T1） improved grain yield compared to the rainfed treatment and resulted in yield values near those of T3, especially when precipitation was higher. These results indicate that T3 is the most suitable irrigation strategy under variable precipitation regimes for stable yield of winter wheat with maximum water savings in the NCP. The application of one irrigation at the jointing stage may also serve as an alternative irrigation strategy for further reducing irrigation for sustainable water resources management in this area.

Root length density distribution and associated soil water dynamics for tomato plants under furrow irrigation in a solar greenhouse

Furrow irrigation is a traditional widely-used irrigation method in the world. Understanding the dynamics of soil water distribution is essential to developing effective furrow irrigation strategies, especially in water-limited regions. The objectives of this study are to analyze root length density distribution and to explore soil water dynamics by simulating soil water content using a HYDRUS-2D model with consideration of root water uptake for furrow irrigated tomato plants in a solar greenhouse in Northwest China. Soil water contents were also in-situ observed by the ECH_2O sensors from 4 June to 19 June and from 21 June to 4 July, 2012. Results showed that the root length density of tomato plants was concentrated in the 0–50 cm soil layers, and radiated 0–18 cm toward the furrow and 0–30 cm along the bed axis. Soil water content values simulated by the HYDRUS-2D model agreed well with those observed by the ECH_2O sensors, with regression coefficient of 0.988, coefficient of determination of 0.89, and index of agreement of 0.97. The HYDRUS-2D model with the calibrated parameters was then applied to explore the optimal irrigation scheduling. Infrequent irrigation with a large amount of water for each irrigation event could result in 10%–18% of the irrigation water losses. Thus we recommend high irrigation frequency with a low amount of water for each irrigation event in greenhouses for arid region. The maximum high irrigation amount and the suitable irrigation interval required to avoid plant water stress and drainage water were 34 mm and 6 days, respectively, for given daily average transpiration rate of 4.0 mm/d. To sum up, the HYDRUS-2D model with consideration of root water uptake can be used to improve irrigation scheduling for furrow irrigated tomato plants in greenhouses in arid regions.

Simulation of water and nitrogen dynamics as affected by drip fertigation strategies

The aim of drip fertigation is synchronising the application of water and nutrients with crop requirements, and maintaining the proper concentration and distribution of nutrient and water in the soil. The wetting patterns and nutrient distributions under drip fertigation have been proved to be closely related to the fertigation strategies. In order to find out the critical factors that affect the nutrient distribution under different drip fertigaiton strategies, a computer simulation model HYDRUS2D/3D was used to simulate the water and nitrate distribution for various fertigation strategies from a surface point source. Simulation results were compared with the observed ones from our previous studies. A 15° wedge-shaped plexiglass container was used in our experiment to represent one-twenty-fourth of the complete cylinder. The height of container is 40 cm, and the radius is 41 cm. The ammonium nitrate solution was added through a no. 7 needle connected to a Mariotte tube with a flexible hose. The soil water content, nitrate and ammonium concentrations were measured. The comparison of simulated and observed data demonstrated that the model performed reliably. The numerical analysis for various fertigation strategies from a surface point source showed that：（1） The total amount of irrigation water, the concentration of the fertilizer solution and the amount of pure water used to flush the pipeline after fertilizer solution application are the three critical factors influencing the distribution of water and fertilizer nitrogen in the soil.（2） The fresh water irrigation duration prior to fertigation has no obvious effect on nitrate distribution. The longer flushing time period after fertigation resulted in nitrate accumulation closer to the wetting front. From the point of avoiding the possibility of nitrate loss from the root zone, we recommended that the flushing time period should be as shorter as possible.（3） For a given amount of fertilizer, higher concentration of the fertilizer applied solution reduces the potential of nitrate leaching in drip irrigation system. While, lower concentration of the fertilizer solution resulted in an uniform distribution of nitrate band closer to the wetted front.

Evapotranspiration and Above Ground Biomass of Acer rubrum from Liners to 8 m Tall Trees

To meet minimum spring flows, water management districts in Florida sought to make both agriculture and urban landscapes water efficient, which includes tree farms. Acer rubrum L. (red maple) trees are endemic to Central Florida and native to the eastern portion of the United States. Urban and suburban expansion has increased use of A. rubrum in landscape plantings and their production in nurseries. In Florida A. rubrum is planted around stormwater retention areas, but also in urban landscapes. To provide a basis for irrigation allocations both during production and in landscapes, daily actual evapotranspiration (ETA) for three red maple trees were measured with weighing lysimeters, beginning with rooted cuttings and continuing until trees averaged 8 m in height. Empirical models were derived to calculate ETA based on crown horizontal projected area or trunk caliper, adjusted daily by changes in reference evapotranspiration (ETo). Water use efficiency, based on carbon sequestered in above ground wood mass, was calculated at the end of five growing seasons. Average ETA to produce these maples was 29,107 L over 4.75 years, with an average water use efficiency of 1 kg dry mass of wood per 709 L of water lost by transpiration.

Evaluation of a model recommended for N fertilizer application in irrigated rice

The response of rice to N fertilizer applicationhas shown that high rates of N application donot always ensure a proportional increase inyield due to high N losses. A model, ORYZA-0 was developed by ten Berge for designingoptimum N fertilizer management strategy inrice. We evaluated the performance ofORYZA-0 in Jinhua, Zhejiang Province. ORYZA-0 includes N uptakes, partition-ing of N among the organs, and utilization ofleaf N in converting solar energy to dry mat-ter. It can predict the amount and time of Nfertilizer application to achieve a maximumbiomass or yield combining with Price algo-rithm optimization procedure.

A Lattice Boltzmann Model to Study Sedimentation Phenomena in Irrigation Canals

Fresh water is one of the most significant resources for human activities and survival,and irrigation is among the most important uses of water.The sustainibility and performance of irrigation canals can be greatly affected by sediment transport and deposition.In our previous works,we proposed a Lattice Boltzmann model for simulating a free surface flow in an irrigation canal,as an alternative to more traditional models mainly based on shallow water equations.Here we introduce the sedimentation phenomenon into our model by adding a new algorithm,based on the earlier work by B.Chopard,A.Dupuis and A.Masselot[9,11,12,27].Transport,erosion,deposition and toppling of sediments are taken into account and enable the global sedimentation algorithm to simulate different transport modes such as bed load and suspended load.In the present work,we study both the behaviour of a sediment deposit located at an underflow submerged gate(depending on the gate opening and the flow discharge)and the influence of the presence of such a deposit on the flow.Both numerical and experimental validations have been performed.The experiments were realized on the micro-canal of the LCIS laboratory at Valence,France.The comparisons between simulations and experiments give good qualitative agreement.