Experimental study on secondary air mixing along the bed height in a circulating fluidized bed with a multitracer-gas method

A multitracer-gas method was proposed to study the secondary air(SA)mixing along the bed height in a circulating fluidized bed(CFB)using carbon monoxide(CO),oxygen(O_(2)),and carbon dioxide(CO_(2))as tracer gases.Experiments were carried out on a cold CFB test rig with a cross-section of 0.42 m×0.73 m and a height of 5.50 m.The effects of superficial velocity,SA ratio,bed inventory,and particle diameter on the SA mixing were investigated.The results indicate that there are some differences in the measurement results obtained using different tracer gases,wherein the deviation between CO and CO_(2) ranges from 42%to 66%and that between O_(2) and CO_(2) ranges from 45%to 71%in the lower part of the fluidized bed.However,these differences became less pronounced as the bed height increased.Besides,the high solid concentration and fine particle diameter in the CFB may weaken the difference.The measurement results of different tracer gases show the same trends under the variation of operating parameters.Increasing superficial velocity and SA ratio and decreasing particle diameter result in better mixing of the SA.The effect of bed inventory on SA mixing is not monotonic.

Stability Analysis and Performance Evaluation of Additive Mixed-Precision Runge-Kutta Methods

Additive Runge-Kutta methods designed for preserving highly accurate solutions in mixed-precision computation were previously proposed and analyzed.These specially designed methods use reduced precision for the implicit computations and full precision for the explicit computations.In this work,we analyze the stability properties of these methods and their sensitivity to the low-precision rounding errors,and demonstrate their performance in terms of accuracy and efficiency.We develop codes in FORTRAN and Julia to solve nonlinear systems of ODEs and PDEs using the mixed-precision additive Runge-Kutta(MP-ARK)methods.The convergence,accuracy,and runtime of these methods are explored.We show that for a given level of accuracy,suitably chosen MP-ARK methods may provide significant reductions in runtime.

The improved artificial bee colony algorithm for mixed additive and multiplicative random error model and the bootstrap method for its precision estimation

To solve the complex weight matrix derivative problem when using the weighted least squares method to estimate the parameters of the mixed additive and multiplicative random error model(MAM error model),we use an improved artificial bee colony algorithm without derivative and the bootstrap method to estimate the parameters and evaluate the accuracy of MAM error model.The improved artificial bee colony algorithm can update individuals in multiple dimensions and improve the cooperation ability between individuals by constructing a new search equation based on the idea of quasi-affine transformation.The experimental results show that based on the weighted least squares criterion,the algorithm can get the results consistent with the weighted least squares method without multiple formula derivation.The parameter estimation and accuracy evaluation method based on the bootstrap method can get better parameter estimation and more reasonable accuracy information than existing methods,which provides a new idea for the theory of parameter estimation and accuracy evaluation of the MAM error model.

Comparative structural and electrochemical properties of mixed P2/O′3-layered sodium nickel manganese oxide prepared by sol-gel and electrospinning methods:Effect of Na-excess content

The effect of Na-excess content in the precursor on the structural and electrochemical performances of sodium nickel manganese oxide(NNMO)prepared by sol-gel and electrospinning methods is investigated in this paper.X-ray diffraction results of the prepared NNMO without adding Na-excess content indicate sodium loss,while the mixed phase of P2/O′3-type layered NNMO presented after adding Na-excess content.Compared with the sol-gel method,the secondary phase of NiO is more suppressed by using the electrospinning method,which is further confirmed by field emission scanning electron microscope images.N_(2) adsorption-desorption isotherms show no remarkably difference in specific surface areas between different preparation methods and Na-excess contents.The analysis of X-ray absorption near edge structure indicates that the oxidation states of Ni and Mn are+2 and+4,respectively.For the electrochemical properties,superior electrochemical performance is observed in the NNMO electrode with a low Na-excess content of 5wt%.The highest specific capacitance is 36.07 F·g^(-1)at0.1 A·g^(-1)in the NNMO electrode prepared by using the sol-gel method.By contrast,the NNMO electrode prepared using the electrospinning method with decreased Na-excess content shows excellent cycling stability of 100%after charge-discharge measurements for 300 cycles.Therefore,controlling the Na excess in the precursor together with the preparation method is important for improving the electrochemical performance of Na-based electrode materials in supercapacitors.

Experimental investigation of the mixing efficiency via intensity of segregation along axial direction of a rotating bar reactor

As a significant index to evaluate the mixing efficiency,studying the concentration distribution is directly related to the intensity of segregation(I_(s)).In this work,the I_(s) of the mixture composed of NaCl solutionwater was investigated experimentally in a rotating bar reactor(RBR)by the conductivity method.The results showed that the mixing efficiency was improved along the axial direction from the bottom to the top in the RBR.The concentration distribution at the bottom section was more uneven,and I_(s) was higher compared with the top section,which decreased from 6.53×10^(-5)to 1.57×10^(-7).With the increase of rotational speed from 0 to 700 r·min^(-1),I_s at the bottom and top sections decreased from 4.27×10^(-3)to 7.10×10^(-5)and from 1.93×10^(-3)to 7.29×10^(-7),respectively.The increases flow rate of solution A,and the decreases of concentration of NaCl and flow rate of solution B gave rise to the reduction of I_(s),signifying an improved mixing efficiency.The results revealed that the conductivity method used in this paper has high efficiency and low cost to measure the I_(s),which indicates a promising prospect for estimating reactors'mixing performance.

Numerical simulations of compressible mixing layers with a discontinuous Galerkin method

Discontinuous Galerkin（DG） method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer,both the instantaneous fiow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer,large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous fiow field for a three-dimensional compressible mixing layer is also reported,which shows the development of largescale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear fiows.

Seasonal variability of the mixed layer depth determined using an improved maximum angle method in the Arctic basins

To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potential density profiles collected using Ice-Tethered Profilers(ITPs)in the Arctic basins during 2005-2021 were used to demonstrate the method’s effectiveness.By comparing the results obtained by the fixed threshold method(FTM),percentage threshold method(PTM),and maximum gradient method(MGM)for profiles in the Canada Basin,Makarov Basin,and Eurasian Basin,we determined that the quality index(1.0 for perfect identification of the MLD)of the IMAM regarding the assessment of the MLD determination method reached 0.94,which is much greater than those of other criteria.Moreover,two types of the density profiles were identified based on the mixed layer development stage.The MLDs of the typical profiles determined using the IMAM were found to have better consistency with the original definition.By utilizing the new mixed layer criterion,the seasonal variations and regional differences in the MLD in the Arctic basins were analyzed.Spatially,the summer and winter MLDs in the Canada Basin were the shallowest(13.55 m in summer,26.76 m in winter)than those in the Makarov(29.51 m in summer,49.08 m in winter)and Eurasian(20.36 m in summer,46.81 m in winter)basins due to the stable stratification in the upper ocean and the subsequent small effects of dynamic and thermodynamic processes(wind-driven stirring and brine rejection)in the Canada Basin.Seasonally,in the three Arctic basins,the average MLD was shallowest(22.77 m)in summer;it deepened through autumn and reached a winter maximum(41.12 m).

A Posteriori Error Estimate of Two Grid Mixed Finite Element Methods for Semilinear Elliptic Equations

In this paper, we present the a posteriori error estimate of two-grid mixed finite element methods by averaging techniques for semilinear elliptic equations. We first propose the two-grid algorithms to linearize the mixed method equations. Then, the averaging technique is used to construct the a posteriori error estimates of the two-grid mixed finite element method and theoretical analysis are given for the error estimators. Finally, we give some numerical examples to verify the reliability and efficiency of the a posteriori error estimator.

Mixed Method in Language Learner Cognition

Research on mixed method has made great development.In order to explore the practical application of mixed method,this article starts from the perspective of language learner cognition and selects The Modern Language Journal and Language Teaching Research as the research journals.It explores some empirical papers that used mixed method to learn the specific research designs of mixed method as well as the main means of its application.The study finds that mixed method has been applied in several fields and is more scientifically reliable than qualitative and quantitative methods especially in language learner cognition,and the different research tools used in the field of language learner cognition demonstrate the flexibility and relevance of mixed method data collection.

Barium titanate ceramic inks for continuous ink-jet printing synthesized by mechanical mixing and sol-gel methods

Ink-jet printing of ceramic thick films is one of low cost on-site ceramic pattern fabrication methods.It is necessary to investigate the rheological behaviour of ceramic inks and drying behaviour of droplets.Two kinds of BaTiO3 ceramic inks were prepared by mechanical mixing and sol-gel methods,respectively.The effect of preparation parameters,such as quantity of polyacrylic acid(PAA)and solid content,on physicochemical and rheologic properties of the ceramic inks was investigated.The results show that they satisfy the requirements of continuous ink-jet printing.The appearances of printed dots and single printed layers were observed by SEM.The SEM images indicate that dots printed with mixing method ink are in ring shape,and dots printed with sol-gel method ink are in pancake shape,so the printed layer surface with the latter ink is smoother.The causes of these phenomena were discussed.

Mixed D-vine copula-based conditional quantile model for stochastic monthly streamflow simulation

Copula functions have been widely used in stochastic simulation and prediction of streamflow.However,existing models are usually limited to single two-dimensional or three-dimensional copulas with the same bivariate block for all months.To address this limitation,this study developed a mixed D-vine copula-based conditional quantile model that can capture temporal correlations.This model can generate streamflow by selecting different historical streamflow variables as the conditions for different months and by exploiting the conditional quantile functions of streamflows in different months with mixed D-vine copulas.The up-to-down sequential method,which couples the maximum weight approach with the Akaike information criteria and the maximum likelihood approach,was used to determine the structures of multivariate Dvine copulas.The developed model was used in a case study to synthesize the monthly streamflow at the Tangnaihai hydrological station,the inflow control station of the Longyangxia Reservoir in the Yellow River Basin.The results showed that the developed model outperformed the commonly used bivariate copula model in terms of the performance in simulating the seasonality and interannual variability of streamflow.This model provides useful information for water-related natural hazard risk assessment and integrated water resources management and utilization.

Research Progress about the Mixing Brine Method to Produce Low- Sodium Carnallite from Saline Lake Brine

Mixing brine method,which founded on the commonion effect,is widely used for low-sodium carnallite production.Compared with traditional carnallite preparation techniques,the mixing brine method possess a

Bearing Capacity Assessment of Collapsible Soils Improved by Deep Soil Mixing Using Finite Element Method

Problematic soils usually cause considerable problems to engineering projects. As an example, soil structure collapse caused by moisture increment or rising underground water level results in huge settlements. This type of problematic soil, named collapsible soil, can cause dramatic problems and should be amended where exists. Today, the use of different techniques for soil reinforcement and soil improvement is widely used to treat soil properties. One of these methods is Deep Soil Mixing (DSM) method. This method becomes more important in the cases of studying and examining collapsible soils. In this research, the settlement of amended collapsible soils, applying deep soil mixing method, is examined. The experiments show that soil amendment using this method, well prevents the settlement of collapsible soils giving rise to bearing capacity.

Error estimates of H^1-Galerkin mixed finite element method for Schrdinger equation

An H^1-Galerkin mixed finite element method is discussed for a class of second order SchrSdinger equation. Optimal error estimates of semidiscrete schemes are derived for problems in one space dimension. At the same time, optimal error estimates are derived for fully discrete schemes. And it is showed that the H1-Galerkin mixed finite element approximations have the same rate of convergence as in the classical mixed finite element methods without requiring the LBB consistency condition.

Synthesis and luminescent properties of Ce^(3+) doped LuAG nano-sized powders by mixed solvo-thermal method

Polycrystalline LuAG:Ce3+(cerium3+-doped lutetium aluminum garnet) powders were prepared by mixed solvo-thermal method.Fourier-transform IR spectroscopy(FTIR) and X-ray diffraction(XRD) measurements showed that the precursors were ethanol derivatives AlO(OH) crystal with hydroxyl and carbonate group.XRD results showed that phase of Lu2O3 disappeared with the precursors were annealed at 400 °C,cubic phase LuAG:Ce3+ appeared but only one diffraction peaks of LuAP(LuAlO3) at calcination temperature to 700 °C,a...

Three Dimensional Baroclinic Numerical Model for Simulating Fresh and Salt Water Mixing in the Yangtze Estuary

For simulating fresh and salt water mixing in estuaries, a three dimensional nonlinear baroclinic numerical model is developed, in which the gradients of horizontal pressure contain die gradient of barotropic pressure arising from the gradient of tidal level and the gradient of baroclinic pressure due to the gradient of salinity. The Eulerian-Lagrangian method is employed to descretize both the momentum equations of tidal motion and the equation of salt water diffusion so as to improve the computational stability and accuracy. The methods to provide the boundary conditions and the initial conditions are proposed, and the criterion for computational stability of the salinity fields is presented. The present model is used for modeling fresh and salt water mixing in the Yangtze Estuary. Computations show that the salinity distribution has the characteristics of partial mixing pattern, and that the present model is suitable for simulation of fresh and salt water mixing in the Yangtze Estuary.

Application of the Modified nverse Design Method in the Optimization of the Runner Blade of a Mixed-Flow Pump

To improve the design speed and reduce the design cost for the previous blade design method, a modified inverse design method is presented. In the new method, after a series of physical and mathematical simplifications, a sail?like constrained area is proposed, which can be used to configure di erent runner blade shapes. Then, the new method is applied to redesign and optimize the runner blade of the scale core component of the 1400?MW canned nuclear coolant pump in an established multi?optimization system compromising the Computational Fluid Dynamics(CFD) analysis, the Response Surface Methodology(RSM) and the Non?dominated Sorting Genetic Algorithm?II(NSGA?II). After the execution of the optimization procedure, three optimal samples were ultimately obtained. Then, through comparative analysis using the target runner blade, it was found that the maximum e ciency improvement reached 1.6%, while the head improvement was about 10%. Overall, a promising runner blade inverse design method which will benefit the hydraulic design of the mixed?flow pump has been proposed.

Numerical solutions to regularized long wave equation based on mixed covolume method

The mixed covolume method for the regularized long wave equation is devel- oped and studied. By introducing a transfer operator γh, which maps the trial function space into the test function space, and combining the mixed finite element with the finite volume method, the nonlinear and linear Euler fully discrete mixed covolume schemes are constructed, and the existence and uniqueness of the solutions are proved. The optimal error estimates for these schemes are obtained. Finally, a numerical example is provided to examine the efficiency of the proposed schemes.

Application of Uniform Experimental Design in Optimizing Excitation Parameters for Magnetic Frequency Mixing Measurements

Excitation parameter preferences are key factors a ecting the performance of magnetic frequency mixing detection.A uniform experimental design method was used to analyze this influence.Using fuzzy theory,a comprehensive model is established for evaluating the e ect of magnetic frequency mixing.A polynomial is selected as the regression function to express explicitly the correlation between the excitation parameters and the frequency-mixing e ect.The excitation parameters were then optimized using genetic algorithm.Magnetic frequency mixing experiments were conducted to measure the surface hardness of some ferromagnetic materials.Frequency mixing is further enhanced under the optimal settings,resulting in an improvement in the measurement sensitivity.The results of this study support the application of the magnetic frequency mixing technique in non-destructive testing.

Spatial structure of turbulent mixing of an anticyclonic mesoscale eddy in the northern South China Sea

Upper turbulent mixing in the interior and surrounding areas of an anticyclonic eddy in the northern South China Sea(SCS)was estimated from underwater glider data(May 2015)in the present study,using the Gregg-HenyeyPolzin parameterization and the Thorpe-scale method.The observations revealed a clear asymmetrical spatial pattern of turbulent mixing in the anticyclonic eddy area.Enhanced diffusivity(in the order of 10–3 m2/s)was found at the posterior edge of the anticyclonic mesoscale eddy;on the anterior side,diffusivity was one order of magnitude lower on average.This asymmetrical pattern was highly correlated with the eddy kinetic energy.Higher shear variance on the posterior side,which is conducive to the triggering of shear instability,may be the main mechanism for the elevated diffusivity.In addition,the generation and growth of sub-mesoscale motions that are fed by mesoscale eddies on their posterior side may also promote the occurrence of strong mixing in the studied region.The results of this study help improve our knowledge regarding turbulent mixing in the northern SCS.