Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionles...Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.展开更多
By using steady and transient methods, the total heat fluxes and the distributions of the heat flux were measured experimentally for an argon DC laminar plasma jet impinging normally on a flat plate at atmospheric pre...By using steady and transient methods, the total heat fluxes and the distributions of the heat flux were measured experimentally for an argon DC laminar plasma jet impinging normally on a flat plate at atmospheric pressure. Results show that the total heat fluxes measured with a steady method are a little bit higher than those with a transient method. Numerical simulation work was executed to compare with the experimental results.展开更多
To further extend knowledge about the detailed knowledge on the crossflow characteristics in a multi-jets system under a confined space,particle image velocimetry (PIV) was employed to investigate the flow structures ...To further extend knowledge about the detailed knowledge on the crossflow characteristics in a multi-jets system under a confined space,particle image velocimetry (PIV) was employed to investigate the flow structures together with the distributions of the mean velocity components for Reynolds numbers (Re) ranging from 6 213 to 13 418,nozzle-to-plate spacing (H/D) varying from 0. 20 to1. 25,respectively. Results show that the crossflow configuration is significantly different from those of large nozzle-to-plate spacing. In addition,a turning point H/D=0.50 is revealed in the profile of the normalized maximum radial velocity which is associated with the heat transfer distribution on the impingement plate.展开更多
The effect of a cross-sectional exit plane on the downstream mixing characteristics of a circular turbulent jet is in- vestigated using large eddy simulation （LES）. The turbulent jet is issued from an orifice-type n...The effect of a cross-sectional exit plane on the downstream mixing characteristics of a circular turbulent jet is in- vestigated using large eddy simulation （LES）. The turbulent jet is issued from an orifice-type nozzle at an exit Reynolds number of 5 ×104. Both instantaneous and statistical velocity fields of the jet are provided. Results show that the rates of the mean velocity decay and jet spread are both higher in the case with the exit plate than without it. The existence of the plate is found to increase the downstream entrainment rate by about 10% on average over the axial range of 8-30de （exit diameter）. Also, the presence of the plate enables the formation of vortex rings to occur further downstream by 0.5-1 .Ode. A physical insight into the near-field jet is provided to explain the importance of the boundary conditions in the evolution of a turbulent jet. In addition, a method of using the decay of the centreline velocity and the half-width of the jet to calculate the entrainment rate is proposed.展开更多
This paper investigated lateral diffusion of a confined two-dimensional wall jet (air inlet height: 5 cm) through a perforated plate. We considered two plates with porosities of and . The plates were positi...This paper investigated lateral diffusion of a confined two-dimensional wall jet (air inlet height: 5 cm) through a perforated plate. We considered two plates with porosities of and . The plates were positioned at distances of 10 cm and 20 cm below the jet inlet. The experiments were realized using 2D Laser Doppler Anemometer (LDA). Different profiles of mean and fluctuating velocities are presented. The presence of a perforated plate strongly modified the airflow pattern compared to an empty enclosure. The velocities above and below the plate depend on several parameters, including the porosity and the plate’s position relative to the inlet slot and the longitudinal position. The difference between the flow velocity above and below the plates could not be related using a universal formula that depends on these parameters. We also investigated the influence of a porous media of a height of 20 cm (a stack of spheres having a diameter of 3.75 cm) located below the perforated plate. The results highlight that the porous medium strengthens the effects of the perforated plate on the flow.展开更多
The skin friction and heat transfer occurring in the laminar boundary layerwhich caused by a vertical liquid jet impinging on a continuously moving horizontal plate werestudied. Similarity solutions for shear stress a...The skin friction and heat transfer occurring in the laminar boundary layerwhich caused by a vertical liquid jet impinging on a continuously moving horizontal plate werestudied. Similarity solutions for shear stress and heat distribution were obtained by using thehooting technique. The results show that the skin friction decreases with an increase of velocityparameter, the evolving of thermal boundary decrease with increasing in Prandtl number, but increasewith increasing of velocity parameter.展开更多
The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and tr...The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and transfer function by using an improved acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. As a result, the frequency characteristics of the acoustic absorption coefficient against the frequency showed a maximum value at the local frequency. The peak frequency of the acoustic absorption coefficient depended on the thickness of the background air space and the thickness of the perforated plate. As the flow rate increased through the micropores, the peak level of the acoustic absorption coefficient also increased until a flow rate of 80?l /min. As the flow rate further increased, the peak level of the acoustic absorption coefficient decreased and that of the high frequency band increased.展开更多
When performing numerical modeling of fluid flows where a clear medium is adjacent to a porous medium, a degree of difficulty related to the condition at the interface between the two media, where slip velocity exists...When performing numerical modeling of fluid flows where a clear medium is adjacent to a porous medium, a degree of difficulty related to the condition at the interface between the two media, where slip velocity exists, is encountered. A similar situation can be found when a jet flow interacts with a perforated plate. The numerical modeling of a perforated plate by meshing in detail each hole is most often impossible in a practical case (many holes with different shapes). Therefore, perforated plates are often modeled as porous zones with a simplified hypothesis based on pressure losses related to the normal flow through the plate. Nevertheless, previous investigations of flow over permeable walls highlight the impossibility of deducing a universal analytical law governing the slip velocity coefficient since the latter depends on many parameters such as the Reynolds number, porosity, interface structure, design of perforations, and flow direction. This makes the modeling of such a configuration difficult. The present study proposes an original numerical interface law for a perforated plate. It is used to model the turbulent jet flow interacting with a perforated plate considered as a fictitious porous medium without a detailed description of the perforations. It considers the normal and tangential effects of the flow over the plate. Validation of the model is realized through comparison with experimental data.展开更多
In this study, flow characteristics are experimentally and numerically discussed, especially concerning shock-cell structure and oscillatory phenomena of supersonic jet. The jet becomes underexpanded when the nozzle p...In this study, flow characteristics are experimentally and numerically discussed, especially concerning shock-cell structure and oscillatory phenomena of supersonic jet. The jet becomes underexpanded when the nozzle pressure ratio of convergent nozzle exceeds the critical value. The underexpanded jet is not uniform because of the presence of the expansion wave, the compression wave and the shock wave formed in it. Many vortices are induced in jet boundary region by shearing stress generated between supersonic jet flow and atmospheric air. They interact with shock waves composing cell node of jet, which is closely related to a noise radiating from the jet. In experiment, flow field is visualized and the shape of cell structure is examined. Furthermore, frequency of vortex generation is measured. The jet is simulated using TVD scheme and the results are compared with the experimental ones. Distortion of cell structure caused by three dimensional oscillation of jet and behavior of vortices are discussed.展开更多
基金Natural Science Foundation of China(51335002,51905049)。
文摘Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.
基金he National Natural Science Foundation of China under the grant No. 59836220 and 19975064and endowed with President's Foundati
文摘By using steady and transient methods, the total heat fluxes and the distributions of the heat flux were measured experimentally for an argon DC laminar plasma jet impinging normally on a flat plate at atmospheric pressure. Results show that the total heat fluxes measured with a steady method are a little bit higher than those with a transient method. Numerical simulation work was executed to compare with the experimental results.
基金National Natural Science Foundation of China(51335002)
文摘To further extend knowledge about the detailed knowledge on the crossflow characteristics in a multi-jets system under a confined space,particle image velocimetry (PIV) was employed to investigate the flow structures together with the distributions of the mean velocity components for Reynolds numbers (Re) ranging from 6 213 to 13 418,nozzle-to-plate spacing (H/D) varying from 0. 20 to1. 25,respectively. Results show that the crossflow configuration is significantly different from those of large nozzle-to-plate spacing. In addition,a turning point H/D=0.50 is revealed in the profile of the normalized maximum radial velocity which is associated with the heat transfer distribution on the impingement plate.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11072005 and 10921202)the Fundamental Research Funds for the Central Universities,China(Grant No.3132013029)
文摘The effect of a cross-sectional exit plane on the downstream mixing characteristics of a circular turbulent jet is in- vestigated using large eddy simulation （LES）. The turbulent jet is issued from an orifice-type nozzle at an exit Reynolds number of 5 ×104. Both instantaneous and statistical velocity fields of the jet are provided. Results show that the rates of the mean velocity decay and jet spread are both higher in the case with the exit plate than without it. The existence of the plate is found to increase the downstream entrainment rate by about 10% on average over the axial range of 8-30de （exit diameter）. Also, the presence of the plate enables the formation of vortex rings to occur further downstream by 0.5-1 .Ode. A physical insight into the near-field jet is provided to explain the importance of the boundary conditions in the evolution of a turbulent jet. In addition, a method of using the decay of the centreline velocity and the half-width of the jet to calculate the entrainment rate is proposed.
文摘This paper investigated lateral diffusion of a confined two-dimensional wall jet (air inlet height: 5 cm) through a perforated plate. We considered two plates with porosities of and . The plates were positioned at distances of 10 cm and 20 cm below the jet inlet. The experiments were realized using 2D Laser Doppler Anemometer (LDA). Different profiles of mean and fluctuating velocities are presented. The presence of a perforated plate strongly modified the airflow pattern compared to an empty enclosure. The velocities above and below the plate depend on several parameters, including the porosity and the plate’s position relative to the inlet slot and the longitudinal position. The difference between the flow velocity above and below the plates could not be related using a universal formula that depends on these parameters. We also investigated the influence of a porous media of a height of 20 cm (a stack of spheres having a diameter of 3.75 cm) located below the perforated plate. The results highlight that the porous medium strengthens the effects of the perforated plate on the flow.
基金[This work was financially supported by "973" key foundation of China (No.G 1998061510).]
文摘The skin friction and heat transfer occurring in the laminar boundary layerwhich caused by a vertical liquid jet impinging on a continuously moving horizontal plate werestudied. Similarity solutions for shear stress and heat distribution were obtained by using thehooting technique. The results show that the skin friction decreases with an increase of velocityparameter, the evolving of thermal boundary decrease with increasing in Prandtl number, but increasewith increasing of velocity parameter.
文摘The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and transfer function by using an improved acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. As a result, the frequency characteristics of the acoustic absorption coefficient against the frequency showed a maximum value at the local frequency. The peak frequency of the acoustic absorption coefficient depended on the thickness of the background air space and the thickness of the perforated plate. As the flow rate increased through the micropores, the peak level of the acoustic absorption coefficient also increased until a flow rate of 80?l /min. As the flow rate further increased, the peak level of the acoustic absorption coefficient decreased and that of the high frequency band increased.
文摘When performing numerical modeling of fluid flows where a clear medium is adjacent to a porous medium, a degree of difficulty related to the condition at the interface between the two media, where slip velocity exists, is encountered. A similar situation can be found when a jet flow interacts with a perforated plate. The numerical modeling of a perforated plate by meshing in detail each hole is most often impossible in a practical case (many holes with different shapes). Therefore, perforated plates are often modeled as porous zones with a simplified hypothesis based on pressure losses related to the normal flow through the plate. Nevertheless, previous investigations of flow over permeable walls highlight the impossibility of deducing a universal analytical law governing the slip velocity coefficient since the latter depends on many parameters such as the Reynolds number, porosity, interface structure, design of perforations, and flow direction. This makes the modeling of such a configuration difficult. The present study proposes an original numerical interface law for a perforated plate. It is used to model the turbulent jet flow interacting with a perforated plate considered as a fictitious porous medium without a detailed description of the perforations. It considers the normal and tangential effects of the flow over the plate. Validation of the model is realized through comparison with experimental data.
文摘In this study, flow characteristics are experimentally and numerically discussed, especially concerning shock-cell structure and oscillatory phenomena of supersonic jet. The jet becomes underexpanded when the nozzle pressure ratio of convergent nozzle exceeds the critical value. The underexpanded jet is not uniform because of the presence of the expansion wave, the compression wave and the shock wave formed in it. Many vortices are induced in jet boundary region by shearing stress generated between supersonic jet flow and atmospheric air. They interact with shock waves composing cell node of jet, which is closely related to a noise radiating from the jet. In experiment, flow field is visualized and the shape of cell structure is examined. Furthermore, frequency of vortex generation is measured. The jet is simulated using TVD scheme and the results are compared with the experimental ones. Distortion of cell structure caused by three dimensional oscillation of jet and behavior of vortices are discussed.
