Wideband Tunable Frequency-Doubling Optoelectronic Oscillator Using a Polarization Modulator and an Optical Bandpass Filter

A wideband tunable frequency-doubling optoelectronic oscillator （FD-OEO） is proposed and experimentally demonstrated based on a polarization modulator and an optical bandpass filter （OBPF）. The central frequency of the correspondingly fundamental OEO could be adjusted by tuning the bandwidth and central frequency of the OBPF, which could also be regarded as a photonic-assisted tunable microwave filter. The frequency tuning range of the FD-OEO covers from 9.5 to 32.8？GHz, and the single sideband phase noise of the fundamental signal is lower than -100dBc/Hz at an offset of 10？kHz. Moreover, the frequency stability of the generated signal is investigated by measuring its Allan deviation. The Allan deviation of the generated fundamental signal at 10？GHz is 2.39×10^-9.

Stable continuous-wave single-frequency intracavity frequency-doubled laser with intensity noise suppressed in audio frequency region

We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To suppress the intensity noise of the high power 532 nm laser, a laser frequency locking system and a feedback loop based on a Mach-Zehnder interferometer were designed and used.The influences of the frequency stabilization and the crucial parameters of the MZI, such as the power splitting ratio of the beam splitters and the locking state of the MZI, on the intensity noise of the 532 nm laser were investigated in detail.After the experimental optimizations, the laser intensity noise in the frequency region from 0.4 kHz to 10 kHz was significantly suppressed.

Optical, Mechanical and Laser-induced Damage Threshold Properties of 1064 nm, 532 nm Frequency-doubled Antireflection Coating for LBO

1 064 nm, 532 nm frequency-doubled antireflection （AR） coatings with buffer layer of SiO2 between the coating and the substrate were fabricated by the electron beam evaporation technology on the substrate of lithium triborate （LiB3O5 or LBO） crystals. The residual reflectance of the sample is 0.07% and 0.11% at 1 064 nm and 532 nm, respectively. The adhesion and the laser-induced damage threshold （LIDT） of the sample are greater than 200 mN and 18.6 J/cm2. The strengthening mechanism of adhesion and LIDT of the buffer layer of SiO2 were discussed by considering full plastic indentation and shear theory, and spallation of a plated film induced by thermal shock stress, respectively.

Employing SiO_2 Buffer Layer to Improve Adhesion of the Frequency-doubled Antireflection Coating on LBO

Frequency-doubled antireflection coatings simultaneously effective at 1064 nm and 532 nm were deposited on the lithium triborate （LiB3O5 or LBO） crystals using the electron beam evaporation method. Comparing with the sample without buffer layer, it is found that the adhesion of the sample with buffer layer of SiO2 between coating and LBO substrate is improved significantly from 137.4 mN to greater than 200 mN. And the laser-induced damage threshold is increased by 20% from 15.1 J/cm^2 to 18.6 J/cm^2. The strengthening mechanism of adhesion of the buffer layer of SiO2 is discussed by considering full plastic indentation and shear theory.

Tunable femtosecond laser in the visible range with an intracavity frequency-doubled optical parametric oscillator

We demonstrated experimentally a synchronously pumped intracavity frequency-doubled femtosecond optical para- metric oscillator （OPO） using a periodically-poled lithium niobate （PPLN） as the nonlinear material in combination with a lithium triborate （LBO） as the doubling crystal. A Kerr-lens-mode-locked （KLM） Ti：sapphire oscillator at the wavelength of 790 nm was used as the pump source, which was capable of generating pulses with a duration as short as 117 fs. A tunable femtosecond laser covering the 624-672 nm range was realized by conveniently adjusting the OPO cavity length. A maximum average output power of 260 mW in the visible range was obtained at the pump power of 2.2 W, with a typical pulse duration of 205 fs assuming a sech2 pulse profile.

Management hepatolithiasis with operative choledochoscopic FREDDY laser lithotripsy combined with or without hepatectomy

BACKGROUND: Hepatolithiasis is very common in East Asia. It is benign in nature, but has a high recurrence rate. It is likely to lead to biliary cirrhosis and increase the risk of cholangiocarcinoma. Hence, the treatment of hepatolithiasis is difficult but vital. In this report, we present a novel approach to manage hepatolithiasis using the choledochoscopic Frequency-Doubled Double pulse Nd:YAG (FREDDY) laser lithotripsy combined with or without hepatectomy. METHODS: Between July 2009 and October 2012, 45 patients underwent choledochoscopic FREDDY laser lithotripsy combined with or without hepatectomy (laser lithotripsy group). Fortyeight patients underwent a traditional operation (traditional method group) from January 2009 to June 2009. Comparative analysis was made of demographic and clinical characteristics of the two groups. RESULTS: The final stone clearance rate of the laser lithotripsy group was 93.3%, whereas that of the traditional method group was 85.4% (P=0.22). In the laser lithotripsy group, 2 patients experienced hemobilia and 3 patients had acute cholangitis. In the traditional method group, 3 patients had intraoperative hemorrhage, 1 patient had bile leakage, 6 patients had acute cholangitis, and 1 patient died of liver failure. Moreover, the operative time in the traditional method group was significantly longer than that in the laser lithotripsy group (P=0.01). The mean hospital stay of the patients in the traditional method group was longer than that in the laser lithotripsy group (9.8 vs8.2 days, P=0.17). Recurrent intrahepatic bile duct stones were not found during the follow-up period in the two groups. CONCLUSION: Operative choledochoscopic FREDDY laser lithotripsy combined with or without hepatectomy may be an effective and safe treatment for hepatolithiasis.

Compact Diode-Pumped Continuous-Wave Nd：LuVO4 Lasers Operated at 916 nm and 458 nm

We report the compact diode-pumped continuous-wave （CW） Nd：LuV04 lasers operated at 916nm and 458nm for the first time. The maximum output power of 780mW at 916nm laser is obtained with a slope efficiency of 9.3%. We generate 50roW of 458nm blue laser employing a type-Ⅰ critical phase-matched LBO crystal.

Diode-pumped Q-switched Extra-cavity Frequency-dou bled Nd∶YVO_4/KTP Green Laser

A diode-pumped acousto-op ti cal(A-O) Q-switched extra-cavity frequency-doubled Nd∶YVO_ 4/ KTP (KTiO PO_ 4) green laser formed with a simple plane-plane cavity has been demonst rated. With the incident pump power of 12.7 W, A-O Q-switched average output power at 1 064 nm was 3.81 W with a duration of 25 ns at a repetition rate of 20 kHz, extra-cavity frequency doubling with KTP as the nonlinear crystal y ielded the maximum output power of 1.92 W at 532 nm, the corresponding optical conversion efficiency from 1 064 nm to 532 nm light is 50.4%. The continuous -wave(CW) laser properties of diode-pumped Nd∶YVO_ 4 crystal operating at 1 064 nm have been studied. With the incident pump power of 25 W, the maximu m CW output power of 13.81 W was obtained with the corresponding optical conver sion efficiency of 55.24%.

Study on 660-nm quasi-continuous-wave intracavity frequency-doubled NdrYAG laser

A quasi-continuous-wave intracavity frequency-doubled Nd:YAG laser which operates at 660 nm is studied. By using a flat-flat laser cavity, 2 Kr-lamps, KTP crystal and an acousto-optically Q-switch, 2-W output power at 660 nm is obtained. The relationship between laser cavity length and output power is analyzed.

Frequency-doubled triangular shape lightwave generation with a flexible modulation index

An approach for full duty frequency-doubled triangle shape lightwave generation is proposed and demonstrated.It requires a dual-parallel Mach–Zehnder modulator（DP-MZM） driven by a sinusoidal signal. A stop band filter is coupled to filter out two undesired sidebands. By tuning the bias voltage applied to the DP-MZM, the output optical intensity with a full duty cycle triangle shape profile can be obtained. It is found that the required modulation index is no longer a fixed one. It can vary within a range, without degrading the target waveform. The principle is analyzed by theory and evaluated by simulation. A proof-of-concept experiment is also conducted.Good agreements between theoretical prediction and experimental results have been found. This approach might be attractive due to the feature of a variable modulation index, which insures simple operation in practice.

High efficiency,low threshold,high repetition rate H-βFraunhofer line light at 486.1 nm generation by an intracavity frequency-doubled optical parametric oscillator

A high efficiency,low threshold,high repetition rate H-βFraunhofer line light at 486.1 nm was demonstrated.A high-efficiency KTP optical parametric oscillator was achieved by double-pass pumping with a high-maturity 5 kHz 532 nm laser.Thanks to the efficient intracavity frequency doubling of the circulating signal wave by a BIBO crystal,the threshold pump power of the 486.1 nm output was 0.9 W,and the maximum output power of 1.6 W was achieved under the pump power of7.5 W.The optical–optical conversion efficiency was 21.3%,with the pulse duration of 45.2 ns,linewidth of~0.12 nm,and beam quality factor M~2 of 2.83.