High-performance liquid-phase catalytic purification of phosphine in tail gas using Pd(Ⅱ)/Cu(Ⅱ)composite

Pd/Cu liquid-phase composite was utilized as the catalyst in this study to remove PH_(3) at low temperatures.The anti-heterotoxicity of catalysts in the PH_(3) catalytic oxidation purification process was carefully explored and pioneered.The catalytic performance,thermodynamics,kinetics,and catalytic oxidation mechanism of Pd/Cu liquid-phase catalyst catalytic oxidation of PH_(3) were thoroughly investigated.The results showed that Pd/Cu has a superior catalytic effect on the removal of PH_(3) in the gas mixture under low temperature.With CO as the carrier gas,the removal efficiency of PH_(3) could be maintained at 100%for nearly 450 min,indicating that the Pd/Cu liquid phase catalyst has good resistance to heterotoxicity.According to the thermodynamic,kinetic,and related characterization results of the PH_(3) purification process,the kinetic region of the gas–liquid reaction of PH_(3) absorption by Pd/Cu solution was an interfacial reaction.Pd was the primary catalyst and Cu was the secondary catalyst,and the adsorption of PH_(3)was a primary reaction.PH_(3) was spontaneously oxidized to H_(3)PO_(4) in the Pd/Cu catalytic system during the removal process.Pd was regenerated by O_(2) and Cu,increasing the activity and stability of the Pd/Cu catalyst in the sustain and efficient purification of PH_(3) in tail gas.

Kinetics of Liquid-Phase Hydrogenation of Toluene Catalyzed by Hydrogen Storage Alloy MlNi_5

The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry. The results show that the reaction rate accelerates when the reaction temperature increases, and reaches its maximum at about 490 K, but if temperature is higher than 510 K, the reaction rate decreases rapidly. The whole reaction process is controlled by the reaction at the surface of the catalyst particles. The mass transfer resistance at gas-liquid interface and that from the bulk liquid phase to the surface of the catalyst particle can be neglected. The apparent reaction rate is zero order for toluene concentration and first order for hydrogen concentration in the liquid phase. The kinetic model is obtained. The kinetic model fits the experimental data very well. The apparent activation energy of the hydrogen absorption reaction of MlNi_5-toluene slurry system is 41.01 kJ·mol^(-1).

On the liquid-phase technology of carbon fiber/aluminum matrix composites

The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper aims to solve these problems.The theoretical and experimental dependence of porosity on the applied pressure were determined.The possibility of obtaining a carbon fiber/aluminum matrix composite wire with a strength value of about 1500 MPa was shown.The correlation among the strength of the carbon fiber reinforced aluminum matrix composite,the fracture surface,and the degradation of the carbon fiber surface was discussed.

Studies on the structure and catalytic performance of Cu-Zn-Al catalyst prepared by liquid-phase preparation technology under different heat treatment atmosphere

Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spectroscope,and N2 adsorption-desorption.Their application in the single-step synthesis of dimethyl ether from syngas was also investigated.The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu0/Cu＋ ratio on the catalyst surface.Moreover,the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and less on the type of heat treatment atmosphere.The prepared catalysts can suppress sintering of active sites at high temperatures,and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis.The catalysts perform best using N2 as the heat treatment atmosphere.

Interfacial reactions and diffusion path in partial transient liquid-phase bonding of Si_3N_4/Ti/Ni/Ti/Si_3N_4

The interfacial reactions in partial transient liquid-phase bonding of Si3N4 ceramics with Ti/Ni/Ti interlayers were studied by means of scanning electron microscopy （SEM）, energy dispersive spectrometry （EDS） and X-ray diffractometry （XRD）. It was shown that the interfacial structure of Si3N4/TiN/Ti5Si3+Ti5Si4 + Ni3Si/ （NiTi ） /Ni3Ti/ Ni was formed after bonding. The activation energies for TiN layer and the mixed reaction layer of Ti5Si3 + Ti5Si4 + Ni3Si are 546. 8 kJ/mol and 543. 9 kJ/mol, respectively. The formation and transition processes of interface layer sequence in the joint were clarified by diffusion path. An important characteristic, which is different from the conventional brazing and soid-state diffusion bonding, has been found, i. e., during the partial transient liquid-phase bonding, not only the reaction layers which have formed grow, but also the diffusion path in the subsequent reaction changes because of the remarkable variation of the concentration on the metal side.

Poly(ethylene glycol)-supported Liquid-phase Parallel Synthesis of Di(aryloxyacetyl)thiosemicarbazides

An efficient poly(ethylene glycol) (PEG)-supported liquid-phase parallel approach to di(aryloxyacetyl)thiosemicarbazides is described. PEG-bound phenol reacted with chloroacetic acid to afford PEG-bound phenyloxyacetic acid, which was readily converted into corresponding phenyloxyacetyl chloride. Subsequent nucleophilic substitution with ammonium thiocyanate followed by addition of aryloxyacetic acid hydrazides gave PEG-bound di(aryloxyacetyl)thiosemi-carbazides, which were easily cleaved to give the resulting library of 1-aryloxyacetyl-4-(4'-methoxylcarbonylphenyloxyacetyl)thiosemicarbazides in good to high yield and high purity.

Mineral-phase evolution and sintering behavior of MO–SiO_2–Al_2O_3–B_2O_3 (M = Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO_2 and network intermediate Al_2O_3 were introduced into typical low-melting binary compositions CaO·B_2O_3, CaO·2B_2O_3, and BaO·B_2O_3 via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950°C. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO–SiO_2–Al_2O_3–B_2O_3(M = Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al_(20)B_4O_(36), CaAl_2Si_2O_8, and BaAl_2Si_2O_8 and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.

Combination of hollow fiber-based liquid-phase microextraction with sweeping techniques in micellar electrokinetic chromatography for the determination of Strychnos alkaloids in human urine

A new method for the enrichment of Strychnos alkaloids in biological samples via liquid-phase microextxaodon （LPME） based on porous polypropylene hollow fibers in combination with on-line sweeping in micellar electrokinodc chromatography was developed. The calibration curve was linear over the range of 20-200 ng mL^-1 for both strychnine and brucine in human urine sample. The detection limits （S/N = 3：1） for strychnine and brucine were 1 ng mL^-1 and 2 ng mL^-1, respectively. The LPME-sweeping method has been successfully applied to the analysis of strychnine and brucine in real urine samples.

Two-dimensional polyaniline nanosheets via liquid-phase exfoliation

Two-dimensional（2D） organic nanomaterials are fascinating because of their unique properties and pentential applications in future optoelectronic devices.Polyaniline（PANI） has attracted much attention for its high conductivity,good environmental stability and unusual doping chemistry.We report on liquid-phase exfoliation of layered PANI films grown by electrochemical polymerization.Atomic force microscopy images demonstrate that few-or even mono-layer PANI nanosheets can be fabricated.The PANI nanosheets can be transferred onto a variety of surfaces,providing a promising route to their incorporation into a variety of devices for further studies and various applications.

Liquid-phase and solid-phase microwave irradiations for reduction of graphite oxide

In this paper, two microwave irradiation methods：（i） liquid-phase microwave irradiation（MWI） reduction of graphite oxide suspension dissolved in de-ionized water and N, N-dimethylformamide, respectively, and（ii） solid-phase MWI reduction of graphite oxide powder have been successfully carried out to reduce graphite oxide. The reduced graphene oxide products are thoroughly characterized by scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectral analysis, Raman spectroscopy, UV-Vis absorption spectral analysis,and four-point probe conductivity measurements. The results show that both methods can efficiently remove the oxygencontaining functional groups attached to the graphite layers, though the solid-phase MWI reduction method can obtain far more efficiently a higher quality-reduced graphene oxide with fewer defects. The I（D）/I（G） ratio of the solid-phase MWI sample is as low as 0.46, which is only half of that of the liquid-phase MWI samples. The electrical conductivity of the reduced graphene oxide by the solid method reaches 747.9 S/m, which is about 25 times higher than that made by the liquid-phase method.

Direct MALDI-MS Analysis of Proteins Isolated by Liquid-phase Isoelectric Focusing Electrophoresis

A liquid-phase isoelectric focusing electrophoresis system(Rotofor) was used as the prefractionation tool for the sample preparation in the MALDI-MS analysis of a protein mixture. Each fraction collected was then directly subjected to MALDI-TOF-MS analysis. By this approach, we are able to resolve two types of hemoglobins, A and C, which cannot be successfully separated by means of the traditional SDS-PAGE method.

Nanobubble Dynamics in Aqueous Surfactant Solutions Studied by Liquid-Phase Transmission Electron Microscopy

Nanobubbles have attracted considerable attention in various industrial applications due to their exceptionally long lifetime and their potential as carriers at the nanoscale.The stability and physiochemical properties of nanobubbles are highly sensitive to the presence of surfactants that can lower their surface tension or improve their electrostatic stabilization.Herein,we report real-time observations of the dynamic behaviors of nanobubbles in the presence of soluble surfactants.Using liquid-phase transmission electron microscopy(TEM)with multi-chamber graphene liquid cells,bulk nanobubbles and surface nanobubbles were observed in the same imaging condition.Our direct observations of nanobubbles indicate that stable gas transport frequently occurs without interfaces merging,while a narrow distance is maintained between the interfaces of interacting surfactant-laden nanobubbles.Our results also elucidate that the interface curvature of nanobubbles is an important factor that determines their interfacial stability.

Trace Determination of Tamoxifen in Biological Fluids Using Hollow Fiber Liquid-Phase Microextraction Followed by High-Performance Liquid Chromatography-Ultraviolet Detection

The applicability of hollow fiber liquid-phase microextraction (HF-LPME) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was evaluated for the extraction and determination of tamoxifen (TAM) in biological fluids including human urine and plasma. The drug was extracted from a 15 mL aqueous sample (source phase;SP) into an organic phase impregnated in the pores of the hollow fiber (membrane phase;MP) followed by the back-extraction into a second aqueous solution (receiving phase;RP) located in the lumen of the hollow fiber. The effects of several factors such as the nature of organic solvent, compositions of SP and RP solutions, extraction time, ionic strength and stirring rate on the extraction efficiency were examined and optimized. An enrichment factor of 360 along with substantial sample clean up was obtained under the optimized conditions. The calibration curve showed linearity in the range of 1 - 500 ng?mL–1 and the limit of detection was found to be 0.5 ng?mL–1 in aqueous medium. A reasonable relative recovery (≥89%) and satisfactory intra-assay (3.7% - 4.2%, n = 3) and inter-assay (7.5% - 7.8%, n = 3) precision illustrated good performance of the analytical procedure in spiked human urine and plasma samples.

Enhancement of Shikonin Production in Cell Suspension Cultures of Arnebia Euchroma Employing Two-Liquid-Phase Systems

1 INTRODUCTIONThe production of secondary metabolites using plant cells has been the subject of much inter-est in recent years.Despite that tremendous research efforts had been made in this topic,notmany products have reached the commercial stage.It is generally acknowledged that the mainproblem in this field is the lack of basic knowledge of the biosynthetic routes,and the mechanisms found to bring about the production of such secondary metabolites.There are,however,some techniques that have beneficial effects on the production and ex-

SYNTHESIS OF DIPEPTIDE THROUGH A TWO-LIQUID-PHASE ENZYME MEMBANE REACTOR

The synthesis of dipeptide AcPheLeuNH2 catalyzed by immobilized pancreatic lipase was carried out in a two- liquid-phase hollow-fiber membrane reactor, operated in a batch mode. Kinetic properties of free and immobilized enzyme, partition behavior between aqueous buffer phase and organic solvent phase, and effective diffusion coefficients of substrates and products through the membrane were investigated respectively. Based on the preliminary experimental results, the performance of the enzyme membrane reactor, which is evaluated by the purity and the yield, is discussed.

Influences of the [Co^2＋]/[Co^3＋] Ratio on the Process of Liquid-phase Oxidation of Toluene by Air

Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.

Three-liquid-phase extraction and separation of V(V) and Cr(VI) from acidic leach solutions of high-chromium vanadium–titanium magnetite

A new method by liquid–liquid–liquid three phase system, consisting of acidified primary amine N1923(abbreviated as A-N1923), poly(ethylene glycol)(PEG) and (NH_4)_2SO_4 aqueous solution, was suggested for the separation and simultaneous extraction of V(V) and Cr(VI) from the acidic leach solutions of highchromium vanadium–titanium magnetite. Experimental results indicated that V(V) and Cr(VI) could be selectively enriched into the A-N1923 organic top phase and PEG-rich middle phase, respectively, while Al(III)and other co-existing impurity ions, such as Si(IV), Fe(III), Ti(IV), Mg(II) and Ca(II) in acidic leach solutions,could be enriched in the(NH_4)_2SO_4 bottom aqueous phase. During the process for extraction and separation of V(V) and Cr(VI), almost all of impurity ions could be removed. The separation factors between V(V) and Cr(VI) could reach 630 and 908, respectively in the organic top phase and PEG middle phase, and yields of recovered V(V) and Cr(VI) in the top phase and middle phase respectively were all above 90%.Various effects including aqueous p H, A-N1923 concentration, PEG added amount and(NH_4)_2SO_4 concentration on three-phase partitioning of V(V) and Cr(VI) were discussed. It was found that the partition of Cr(VI) into the PEG-rich middle phase was driven by hydrophobic interaction, while extraction of V(V) by A-N1923 resulted of anion exchange between NO_3^- and H_2V_(10)O_(28)^(-4). Stripping of V(V) and Cr(VI) from the top organic phase and the middle PEG-rich phase were achieved by mixing respectively with NaNO_3 aqueous solutions and Na OH-((NH_4)_2SO_4 solutions. The present work highlights a new approach for the extraction and purification of V and Cr from the complex multi-metal co-existing acidic leach solutions of high-chromium vanadium–titanium magnetite.

Kinetic Study on Liquid-Phase Hydrodesulfurization of FCC Diesel in Tubular Reactors

According to the characteristics of FCC diesel, a technology of liquid-phase hydrodesulfurization of the diesel in tubular reactors was proposed and lab-scale experiments were carried out. A kinetic model for the hydrodesulfurization process was developed and verified. The model was utilized to predict the sulfur content of products under different operating conditions. The effects of temperature, space velocity, pressure, and hydrogen concentration on the desulfurization rate were investigated.

Liquid-phase preparation and electrochemical property of LiFePO_4/C nanowires

Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),thermogravimetric and differential-thermogravimetric analysis(TG-DTA) and energy dispersive X-ray spectrometry(EDS) techniques,showing uniform nanowire shape of LiFePO4/C with a diameter of 80-150 nm and a length of several microns.The heat-treated LiFePO4/C nanowires show excellent electrochemical properties of specific discharge capacity,rate capacity and cycling stability.In particular,the LiFePO4/C nanowires heat-treated at 400 °C show preferable first discharge specific capacity of 161 mA·h/g at 0.1C rate,while the voltage platform is 3.4 V and the first discharge specific capacity is 93 mA·h/g at 20C rate.The specific capacity retention is 98% after 50 cycles at 5C rate.