The global energy demand increases with development and population rise. Most electrical power is currently generated by conventional methods from fossil fuels. Despite the high energy demand, the conventional energy ...The global energy demand increases with development and population rise. Most electrical power is currently generated by conventional methods from fossil fuels. Despite the high energy demand, the conventional energy resources such as fossil fuels have been declining and harmful combustion byproducts are causing global warming. The Organic Rankine Cycle power plant is a very effective option for utilization of low grade heat sources for power generation. In the Organic Rankine Cycle heat exchangers such as evaporators and condensers are key components that determine its performance. Researches indicated that shell tube heat exchangers are effectively utilized in this cycle. The design of the heat exchanger involves establishing the right flow pattern of the interacting fluids. The performance of these exchangers can be optimized by inserting baffles in the shell to direct the flow of fluid across the tubes on shell side. In this work heat exchangers have been developed to improve heat recovery from geothermal brine for additional power generation. The design involved sizing of heat exchanger (evaporator) using the LMTD method based on an expected heat transfer rate. The heat exchanger of the model power plant was tested in which hot water simulated brine. The results indicated that the heat exchanger is thermally suitable for the evaporator of the model power plant.展开更多
The ocean thermal energy conversion (OTEC) system is a promising solution to provide stable electricity supply. Although the available temperature difference in OTEC systems is small, an ammonia/water mixture as worki...The ocean thermal energy conversion (OTEC) system is a promising solution to provide stable electricity supply. Although the available temperature difference in OTEC systems is small, an ammonia/water mixture as working fluid is expected to decrease irreversible losses in the heat exchangers and to improve system performance. However, in actual heat exchangers, an adequate temperature crossing does not occur in the condenser but in the evaporator. Therefore, clarification of this characteristic is important. To date, the logarithmic temperature difference (LMTD) method is used in performance evaluations of OTEC heat exchangers. This method is of limited use if physical properties of fluids vary. A generalized mean temperature difference (GMTD) method is introduced to perform this evaluation. As changes in fluid property values can be considered in the GMTD method, method dependencies on heat exchanger characteristics, effectiveness, and system characteristics can be studied. In particular, GMTD and LMTD using a pure substance were found to be almost equal. Mean temperature differences using mixtures as working fluid were higher in the evaporator, but lower in the condenser, from the GMTD method than from the LMTD method. For higher ammonia concentrations in ammonia/water mixtures, the mean temperature differences from both methods are different.展开更多
In the first part of this paper, a simplified approach to design a Shell & Tube Heat Exchanger [STHE] for beverage and process industry application is presented. The design of STHE includes thermal design and mech...In the first part of this paper, a simplified approach to design a Shell & Tube Heat Exchanger [STHE] for beverage and process industry application is presented. The design of STHE includes thermal design and mechanical design. The thermal design of STHE involves evaluation of required effective surface area (i.e. number of tubes) and finding out log mean temperature difference [LMTD]. Whereas, the mechanical design includes the design of main shell under internal & external pressure, tube design, baffles design gasket, etc. The design was carried out by referring ASME/TEMA standards, available at the company. The complete design, fabrication, testing and analysis work was carried out at Alfa Laval (India), Ltd., Pune-12. In the second part of this paper detail view of design optimization is presented by flow induced vibration analysis [FVA].展开更多
In the new century, energy and environmental problems are becoming more critical, and the development of natural energy is desired. Low-grade Thermal Energy Conversion(LTEC) is refocused as one of the renewable energy...In the new century, energy and environmental problems are becoming more critical, and the development of natural energy is desired. Low-grade Thermal Energy Conversion(LTEC) is refocused as one of the renewable energy methods. The usefulness of LTEC is expected using hot springs and waste heat. In the case of the Rankine cycle using ammonia as the working fluid, the thermal properties of the working fluid changes in the evaporator. The traditional evaluation method of heat exchanger performance is the LMTD(Logarithmic Mean Temperature Difference) method. On the other hand, the GMTD(Generalized Mean Temperature Difference) method allows the variation of thermal properties in the heat exchanger. The aim of this study is to compare the two methods for the calculation of temperature differences and the corresponding influence on the total performance of the Rankine cycle that is operated using ammonia as a working fluid. As a result, the thermal efficiency of the Rankine cycle is greater than that of the LMTD method. Moreover, the computable range of the GMTD calculation method is less than that of the LMTD calculation method.展开更多
文摘The global energy demand increases with development and population rise. Most electrical power is currently generated by conventional methods from fossil fuels. Despite the high energy demand, the conventional energy resources such as fossil fuels have been declining and harmful combustion byproducts are causing global warming. The Organic Rankine Cycle power plant is a very effective option for utilization of low grade heat sources for power generation. In the Organic Rankine Cycle heat exchangers such as evaporators and condensers are key components that determine its performance. Researches indicated that shell tube heat exchangers are effectively utilized in this cycle. The design of the heat exchanger involves establishing the right flow pattern of the interacting fluids. The performance of these exchangers can be optimized by inserting baffles in the shell to direct the flow of fluid across the tubes on shell side. In this work heat exchangers have been developed to improve heat recovery from geothermal brine for additional power generation. The design involved sizing of heat exchanger (evaporator) using the LMTD method based on an expected heat transfer rate. The heat exchanger of the model power plant was tested in which hot water simulated brine. The results indicated that the heat exchanger is thermally suitable for the evaporator of the model power plant.
文摘The ocean thermal energy conversion (OTEC) system is a promising solution to provide stable electricity supply. Although the available temperature difference in OTEC systems is small, an ammonia/water mixture as working fluid is expected to decrease irreversible losses in the heat exchangers and to improve system performance. However, in actual heat exchangers, an adequate temperature crossing does not occur in the condenser but in the evaporator. Therefore, clarification of this characteristic is important. To date, the logarithmic temperature difference (LMTD) method is used in performance evaluations of OTEC heat exchangers. This method is of limited use if physical properties of fluids vary. A generalized mean temperature difference (GMTD) method is introduced to perform this evaluation. As changes in fluid property values can be considered in the GMTD method, method dependencies on heat exchanger characteristics, effectiveness, and system characteristics can be studied. In particular, GMTD and LMTD using a pure substance were found to be almost equal. Mean temperature differences using mixtures as working fluid were higher in the evaporator, but lower in the condenser, from the GMTD method than from the LMTD method. For higher ammonia concentrations in ammonia/water mixtures, the mean temperature differences from both methods are different.
文摘In the first part of this paper, a simplified approach to design a Shell & Tube Heat Exchanger [STHE] for beverage and process industry application is presented. The design of STHE includes thermal design and mechanical design. The thermal design of STHE involves evaluation of required effective surface area (i.e. number of tubes) and finding out log mean temperature difference [LMTD]. Whereas, the mechanical design includes the design of main shell under internal & external pressure, tube design, baffles design gasket, etc. The design was carried out by referring ASME/TEMA standards, available at the company. The complete design, fabrication, testing and analysis work was carried out at Alfa Laval (India), Ltd., Pune-12. In the second part of this paper detail view of design optimization is presented by flow induced vibration analysis [FVA].
文摘In the new century, energy and environmental problems are becoming more critical, and the development of natural energy is desired. Low-grade Thermal Energy Conversion(LTEC) is refocused as one of the renewable energy methods. The usefulness of LTEC is expected using hot springs and waste heat. In the case of the Rankine cycle using ammonia as the working fluid, the thermal properties of the working fluid changes in the evaporator. The traditional evaluation method of heat exchanger performance is the LMTD(Logarithmic Mean Temperature Difference) method. On the other hand, the GMTD(Generalized Mean Temperature Difference) method allows the variation of thermal properties in the heat exchanger. The aim of this study is to compare the two methods for the calculation of temperature differences and the corresponding influence on the total performance of the Rankine cycle that is operated using ammonia as a working fluid. As a result, the thermal efficiency of the Rankine cycle is greater than that of the LMTD method. Moreover, the computable range of the GMTD calculation method is less than that of the LMTD calculation method.
