Roller leveling process of longitudinal profile （LP） plate is hardly studied because plate thickness changes. Deformation characteristics and residual curvature during LP plate leveling process were investigated bas...Roller leveling process of longitudinal profile （LP） plate is hardly studied because plate thickness changes. Deformation characteristics and residual curvature during LP plate leveling process were investigated based on curva ture integral by elastic plastic differences. It was found that entry intermesh section is reduced with increasing thick- ness and entry intermesh should be from 0.7 to 1.1 mm for LP plate with 42/54 mm in thickness. In order to get satisfactory flatness along longitudinal direction, small entry intermesh should be selected and exit intermesh should be 0 ram. In addition, thickness section for I.P plate which can be leveled by 11 roller leveler is from 24 to 60 mm. Finally, there is an intermesh schedule that could level LP plate with initial curvature less than elastic limit curvature.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50604006,50974039)
文摘Roller leveling process of longitudinal profile （LP） plate is hardly studied because plate thickness changes. Deformation characteristics and residual curvature during LP plate leveling process were investigated based on curva ture integral by elastic plastic differences. It was found that entry intermesh section is reduced with increasing thick- ness and entry intermesh should be from 0.7 to 1.1 mm for LP plate with 42/54 mm in thickness. In order to get satisfactory flatness along longitudinal direction, small entry intermesh should be selected and exit intermesh should be 0 ram. In addition, thickness section for I.P plate which can be leveled by 11 roller leveler is from 24 to 60 mm. Finally, there is an intermesh schedule that could level LP plate with initial curvature less than elastic limit curvature.
