The use of IEEE 802.15.4 standard based application systems has been rapidly increasing, for example, in medical services, sensor networks, public safety systems, and home automation systems. However, issues arise fro...The use of IEEE 802.15.4 standard based application systems has been rapidly increasing, for example, in medical services, sensor networks, public safety systems, and home automation systems. However, issues arise from the fact that IEEE 802.15.4 standard based low rate wireless personal area networks(LR-WPANs) use the same frequency bands as wireless local area networks(WLANs), and they interfere with each other. Based on past research on this issue, the interference has a more serious impact on LR-WPANs' performance than on WLANs' performance. In this paper we propose a method to improve LR-WPANs' performance while coexisting with WLANs, which is called the reliable beacon transmission based medium access control(MAC) protocol. Since the reliability of a beacon frame is important, in this method, only the beacon frame is transmitted in interference-free channels, and the data packets are transmitted in interfered channels instead of abandoning the channels altogether. This method increases the reliability of beacon frames as well as overall channel utilizations. The effectiveness of the proposed method was evaluated through extensive simulations, and this paper proves that this method improves the performance of IEEE 802.15.4 based wireless sensor networks(WSNs) over WLANs' interferences.展开更多
The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power...The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.展开更多
This article presents an analysis of wireless personal area networks with low transmission rate, utilized more and more often in industrial or alarm systems, as well as in sensor networks. The structure of these syste...This article presents an analysis of wireless personal area networks with low transmission rate, utilized more and more often in industrial or alarm systems, as well as in sensor networks. The structure of these systems and available ways of transmission are defined by the IEEE 802.15.4 standard. The main characteristics of this standard are given in the first part of this article. The second part contains the description of simulation tests that have been realized. Their results make available an evaluation of the effective transmission rate of a transmission channel, the resistance to the phenomenon of hidden station as well as sensibility to the problem of the exposed station.展开更多
Based on IEEE 802.15.4 Low Rate-Wireless Personal Area Network (LR-WPAN) standard, the Zigbee standard has been proposed to interconnect simple, low rate and battery powered wireless devices. The deployment of Zigbee ...Based on IEEE 802.15.4 Low Rate-Wireless Personal Area Network (LR-WPAN) standard, the Zigbee standard has been proposed to interconnect simple, low rate and battery powered wireless devices. The deployment of Zigbee network is expected to facilitate numerous applications such as Home-appliance networks, home healthcare, medical monitoring and environmental sensors. An effective routing scheme is more important for Zigbee mesh networks. In order to achieve effective routing in Zigbee Mesh networks, a Zigbee protocol module is realized using NS-2. The suitable routing for different data services in the Zigbee application layer and a best routing strategy for Zigbee mesh network are proposed. The simulation shows the selection of suitable routing for continuous data services and for bursting data services in the Zigbee application layer and the comparison of three routing strategies namely ERD (All packets Enable Route Discovery), SRD (All packets Suppress Route Discovery) and BOS (routing Based on Data Services) in the aspects of Efficiency and Overhead.展开更多
基金Project supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education(No.2013R1A1A2005692)
文摘The use of IEEE 802.15.4 standard based application systems has been rapidly increasing, for example, in medical services, sensor networks, public safety systems, and home automation systems. However, issues arise from the fact that IEEE 802.15.4 standard based low rate wireless personal area networks(LR-WPANs) use the same frequency bands as wireless local area networks(WLANs), and they interfere with each other. Based on past research on this issue, the interference has a more serious impact on LR-WPANs' performance than on WLANs' performance. In this paper we propose a method to improve LR-WPANs' performance while coexisting with WLANs, which is called the reliable beacon transmission based medium access control(MAC) protocol. Since the reliability of a beacon frame is important, in this method, only the beacon frame is transmitted in interference-free channels, and the data packets are transmitted in interfered channels instead of abandoning the channels altogether. This method increases the reliability of beacon frames as well as overall channel utilizations. The effectiveness of the proposed method was evaluated through extensive simulations, and this paper proves that this method improves the performance of IEEE 802.15.4 based wireless sensor networks(WSNs) over WLANs' interferences.
基金supported in part by the National Natural Science Foundation of China(No.61306027)
文摘The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.
文摘This article presents an analysis of wireless personal area networks with low transmission rate, utilized more and more often in industrial or alarm systems, as well as in sensor networks. The structure of these systems and available ways of transmission are defined by the IEEE 802.15.4 standard. The main characteristics of this standard are given in the first part of this article. The second part contains the description of simulation tests that have been realized. Their results make available an evaluation of the effective transmission rate of a transmission channel, the resistance to the phenomenon of hidden station as well as sensibility to the problem of the exposed station.
文摘Based on IEEE 802.15.4 Low Rate-Wireless Personal Area Network (LR-WPAN) standard, the Zigbee standard has been proposed to interconnect simple, low rate and battery powered wireless devices. The deployment of Zigbee network is expected to facilitate numerous applications such as Home-appliance networks, home healthcare, medical monitoring and environmental sensors. An effective routing scheme is more important for Zigbee mesh networks. In order to achieve effective routing in Zigbee Mesh networks, a Zigbee protocol module is realized using NS-2. The suitable routing for different data services in the Zigbee application layer and a best routing strategy for Zigbee mesh network are proposed. The simulation shows the selection of suitable routing for continuous data services and for bursting data services in the Zigbee application layer and the comparison of three routing strategies namely ERD (All packets Enable Route Discovery), SRD (All packets Suppress Route Discovery) and BOS (routing Based on Data Services) in the aspects of Efficiency and Overhead.
