基于LS-DYNA的不同装药量对爆破振动效应的影响研究

由于爆破活动的复杂性,很难通过工程试验进行爆破振动效应研究。运用数值模拟计算的方法对爆破振动效应及其危害进行相关研究。结合吴庄铁矿的相关数据,运用ANSYS/LS-DYNA有限元程序模拟1 000 kg、1 500 kg、2 000 kg及3 000 kg等4种装药量情况下的爆破对地层岩体的振动效应,通过分析得到爆破振速衰减变化以及其应力的变化规律,得出本次爆破生产作业最大装药量为1 500 kg时最为合理;同时该模型模拟结果与吴庄铁矿实际生产爆破计划基本吻合,说明该模型的构建较为成功。模拟结果可以较真实地反映出该铁矿爆破时的爆破振动效应对矿区周边建筑物的影响。

Efficient unequal error protection for online fountain codes

In this paper,an efficient unequal error protection(UEP)scheme for online fountain codes is proposed.In the buildup phase,the traversing-selection strategy is proposed to select the most important symbols(MIS).Then,in the completion phase,the weighted-selection strategy is applied to provide low overhead.The performance of the proposed scheme is analyzed and compared with the existing UEP online fountain scheme.Simulation results show that in terms of MIS and the least important symbols(LIS),when the bit error ratio is 10-4,the proposed scheme can achieve 85%and 31.58%overhead reduction,respectively.

Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation(BICGSM) with iterative decoding(BICGSM-ID) for multiple-input multiple-output(MIMO) visible light communications(VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain(SiD) symbols and the spatial-domain(SpD) light emitting diode(LED)-index patterns are coded by a protograph low-density parity-check(P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating(SSER) method for constructing a type of novel generalized spatial modulation(GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems.Moreover, by applying a modified PEXIT(MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate(EARA) codes,which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSMID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.

基于LS-DYNA的深孔分段爆破模拟优化研究

本研究以某钨矿深孔分段爆破成井项目为背景,利用LS-DYNA非线性动力有限元软件进行了深孔一次凿岩分段爆破条件下的段高参数优化模拟。通过比较不同掏槽孔微差起爆顺序,发现相邻炮孔同时起爆的掏槽效果优于对向炮孔同时起爆的效果。研究结果揭示了随着段高的增加,装药量及岩石的炸药单耗同步增加。特别在2.3 m和2.6 m段高成井时,不仅成井效果较好,而且飞石产生较少。工业试验进一步验证了模拟结果的准确性,证实采用2.6 m分段高度进行分段爆破在实际工程中能够达到较佳的爆破效果。这些研究成果不仅为该钨矿深孔分段爆破成井项目提供了科学依据,同时也为类似工程提供了宝贵的经验和方法参考。

Physical Layer Encryption of OFDM-PON Based on Quantum Noise Stream Cipher with Polar Code

Orthogonal frequency division multiplexing passive optical network(OFDM-PON) has superior anti-dispersion property to operate in the C-band of fiber for increased optical power budget. However,the downlink broadcast exposes the physical layer vulnerable to the threat of illegal eavesdropping. Quantum noise stream cipher(QNSC) is a classic physical layer encryption method and well compatible with the OFDM-PON. Meanwhile, it is indispensable to exploit forward error correction(FEC) to control errors in data transmission. However, when QNSC and FEC are jointly coded, the redundant information becomes heavier and thus the code rate of the transmitted signal will be largely reduced. In this work, we propose a physical layer encryption scheme based on polar-code-assisted QNSC. In order to improve the code rate and security of the transmitted signal, we exploit chaotic sequences to yield the redundant bits and utilize the redundant information of the polar code to generate the higher-order encrypted signal in the QNSC scheme with the operation of the interleaver.We experimentally demonstrate the encrypted 16/64-QAM, 16/256-QAM, 16/1024-QAM, 16/4096-QAM QNSC signals transmitted over 30-km standard single mode fiber. For the transmitted 16/4096-QAM QNSC signal, compared with the conventional QNSC method, the proposed method increases the code rate from 0.1 to 0.32 with enhanced security.

基于LS-DYNA二次开发的AlNi合金弹丸对单层靶的撞击特性研究

基于塑性功温升原理对Johnson Cook材料模型中的温度项进行了简化,并加入了冲击反应材料化学反应模型,基于LS-DYNA平台下的二次开发功能编写得到适用于冲击反应材料的本构模型。建立了弹丸撞击单层防护结构的仿真模型并分别研究了普通材料和冲击反应材料的毁伤特性。得到了不同撞击参数下冲击反应材料和普通金属弹丸对单层靶板的毁伤规律。

适用2000 HSC CODE的高速船特点及总体设计要求

高速船由于其航速高、质量轻、营运特殊等特点,需要适用的规则与常规船型不同。2000年的《国际高速船安全规则》(简称2000 HSC CODE)作为较完备的适用于高速船的规则,被各海事主管机关广泛接受作为高速船的设计依据。文中简要介绍2000 HSC CODE的安全原理,以及该规则对各海事主管机关的适用程度;然后通过国内外高速船事故来分析该类船的事故类型及致因特点,并进一步介绍了适用高速船的风险控制及设计措施,包括营运限制、破舱稳性、防火要求和撤离分析等总体设计要求,以供理解高速船的安全原理并指导其设计。

CodeScore-R:用于评估代码合成功能准确性的自动化鲁棒指标

评估指标在代码合成领域中至关重要.常用的代码评估指标可以分为3种类型:基于匹配、基于语义和基于执行.其中,基于执行的Pass@k指标通过执行测试用例,能够准确判断预测代码的功能准确性.然而,该指标的计算需要大量开销,因此亟需设计一种自动化评估指标,在无需测试用例时仍可评估预测代码的功能准确性.此外,好的评估指标应当具有鲁棒性,即预测代码发生微小改变时,评估指标仍能保持其准确性.为此,提出了一种基于UniXcoder和对比学习的自动化鲁棒指标CodeScore-R,用于评估代码合成的功能准确性. CodeScore-R采用草图化处理、语法等价转换和变异测试等技术手段,有效减轻了标识符、语法结构和运算符对评估结果的干扰.实验结果表明,在Java和Python语言上的代码生成和迁移任务中,CodeScore-R的表现优于其他无需测试用例的评估指标,且更接近Pass@k指标,并具有更强的鲁棒性.

Improved Belief Propagation Decoder for LDPC-CRC-Polar Codes with Bit-Freezing

Though belief propagation bit-flip(BPBF)decoding improves the error correction performance of polar codes,it uses the exhaustive flips method to achieve the error correction performance of CA-SCL decoding,thus resulting in high decoding complexity and latency.To alleviate this issue,we incorporate the LDPC-CRC-Polar coding scheme with BPBF and propose an improved belief propagation decoder for LDPC-CRC-Polar codes with bit-freezing(LDPCCRC-Polar codes BPBFz).The proposed LDPCCRC-Polar codes BPBFz employs the LDPC code to ensure the reliability of the flipping set,i.e.,critical set(CS),and dynamically update it.The modified CS is further utilized for the identification of error-prone bits.The proposed LDPC-CRC-Polar codes BPBFz obtains remarkable error correction performance and is comparable to that of the CA-SCL(L=16)decoder under medium-to-high signal-to-noise ratio(SNR)regions.It gains up to 1.2dB and 0.9dB at a fixed BLER=10-4compared with BP and BPBF(CS-1),respectively.In addition,the proposed LDPC-CRC-Polar codes BPBFz has lower decoding latency compared with CA-SCL and BPBF,i.e.,it is 15 times faster than CA-SCL(L=16)at high SNR regions.

基于LS-DYNA的ECC管桩的抗冲击性能分析

为研究工程水泥基复合材料(Engineering Cementitious Composite,ECC)管桩的抗冲击性能,采用Ansys/LS-DYNA对管桩受竖向落锤冲击作用进行模拟。基于静态拉压试验和动态压缩试验获得关键参数,建立ECC管桩的HJC(Holmquist-Johnson-Cook)本构模型,通过霍普金森压杆试验(Split Hopkinson Pressure Bar,SHPB)验证有限元模型的正确性。对不同锤体质量和冲击速度组合的管桩模型进行参数化分析,得到管桩在不同冲击能量下的位移、能量时程曲线和有效塑性应变图等动力响应。结果表明:在竖向冲击作用下,ECC管桩的最大残余变形只有高强混凝土(High-Strength Concrete,HC)管桩的66.0%,最小残余变形仅为HC管桩的13.7%;且ECC管桩释放的变形能占比平均为HC管桩的6.26倍。表明ECC管桩较HC管桩有更好的抗损伤能力和弹性恢复能力。

Doped low-density parity-check codes

In this paper,we propose a doping approach to lower the error floor of Low-Density Parity-Check(LDPC)codes.The doping component is a short block code in which the information bits are selected from the coded bits of the dominant trapping sets of the LDPC code.Accordingly,an algorithm for selecting the information bits of the short code is proposed,and a specific two-stage decoding algorithm is presented.Simulation results demonstrate that the proposed doped LDPC code achieves up to 2.0 dB gain compared with the original LDPC code at a frame error rate of 10^(-6)Furthermore,the proposed design can lower the error floor of original LDPC Codes.

A free monoid containing all prefix codes

In this paper,we exhibit a free monoid containing all prefix codes in connection with the sets of i-th powers of primitive words for all i≥2.This extends two results given by Shyr and Tsai in 1998 at the same time.

A GAN-EfficientNet-Based Traceability Method for Malicious Code Variant Families

Due to the diversity and unpredictability of changes in malicious code,studying the traceability of variant families remains challenging.In this paper,we propose a GAN-EfficientNetV2-based method for tracing families of malicious code variants.This method leverages the similarity in layouts and textures between images of malicious code variants from the same source and their original family of malicious code images.The method includes a lightweight classifier and a simulator.The classifier utilizes the enhanced EfficientNetV2 to categorize malicious code images and can be easily deployed on mobile,embedded,and other devices.The simulator utilizes an enhanced generative adversarial network to simulate different variants of malicious code and generates datasets to validate the model’s performance.This process helps identify model vulnerabilities and security risks,facilitating model enhancement and development.The classifier achieves 98.61%and 97.59%accuracy on the MMCC dataset and Malevis dataset,respectively.The simulator’s generated image of malicious code variants has an FID value of 155.44 and an IS value of 1.72±0.42.The classifier’s accuracy for tracing the family of malicious code variants is as high as 90.29%,surpassing that of mainstream neural network models.This meets the current demand for high generalization and anti-obfuscation abilities in malicious code classification models due to the rapid evolution of malicious code.

Focus control of wide-angle metalens based on digitally encoded metasurface

Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.

Design and implementation of code acquisition using sparse Fourier transform

Code acquisition is the kernel operation for signal synchronization in the spread-spectrum receiver.To reduce the computational complexity and latency of code acquisition,this paper proposes an efficient scheme employing sparse Fourier transform(SFT)and the relevant hardware architecture for field programmable gate array(FPGA)and application-specific integrated circuit(ASIC)implementation.Efforts are made at both the algorithmic level and the implementation level to enable merged searching of code phase and Doppler frequency without incurring massive hardware expenditure.Compared with the existing code acquisition approaches,it is shown from theoretical analysis and experimental results that the proposed design can shorten processing latency and reduce hardware complexity without degrading the acquisition probability.

Parallel Implementation of the CCSDS Turbo Decoder on GPU

This paper presents a software turbo decoder on graphics processing units(GPU).Unlike previous works,the proposed decoding architecture for turbo codes mainly focuses on the Consultative Committee for Space Data Systems(CCSDS)standard.However,the information frame lengths of the CCSDS turbo codes are not suitable for flexible sub-frame parallelism design.To mitigate this issue,we propose a padding method that inserts several bits before the information frame header.To obtain low-latency performance and high resource utilization,two-level intra-frame parallelisms and an efficient data structure are considered.The presented Max-Log-Map decoder can be adopted to decode the Long Term Evolution(LTE)turbo codes with only small modifications.The proposed CCSDS turbo decoder at 10 iterations on NVIDIA RTX3070 achieves about 150 Mbps and 50Mbps throughputs for the code rates 1/6 and 1/2,respectively.

Gray code based gradient-free optimization algorithm for parameterized quantum circuit

A Gray code based gradient-free optimization(GCO)algorithm is proposed to update the parameters of parameterized quantum circuits(PQCs)in this work.Each parameter of PQCs is encoded as a binary string,named as a gene,and a genetic-based method is adopted to select the offsprings.The individuals in the offspring are decoded in Gray code way to keep Hamming distance,and then are evaluated to obtain the best one with the lowest cost value in each iteration.The algorithm is performed iteratively for all parameters one by one until the cost value satisfies the stop condition or the number of iterations is reached.The GCO algorithm is demonstrated for classification tasks in Iris and MNIST datasets,and their performance are compared by those with the Bayesian optimization algorithm and binary code based optimization algorithm.The simulation results show that the GCO algorithm can reach high accuracies steadily for quantum classification tasks.Importantly,the GCO algorithm has a robust performance in the noise environment.

An Encode-and CRT-Based Scalability Scheme for Optimizing Transmission in Blockchain

Blockchain technology has witnessed a burgeoning integration into diverse realms of economic and societal development.Nevertheless,scalability challenges,characterized by diminished broadcast efficiency,heightened communication overhead,and escalated storage costs,have significantly constrained the broad-scale application of blockchain.This paper introduces a novel Encode-and CRT-based Scalability Scheme(ECSS),meticulously refined to enhance both block broadcasting and storage.Primarily,ECSS categorizes nodes into distinct domains,thereby reducing the network diameter and augmenting transmission efficiency.Secondly,ECSS streamlines block transmission through a compact block protocol and robust RS coding,which not only reduces the size of broadcasted blocks but also ensures transmission reliability.Finally,ECSS utilizes the Chinese remainder theorem,designating the block body as the compression target and mapping it to multiple modules to achieve efficient storage,thereby alleviating the storage burdens on nodes.To evaluate ECSS’s performance,we established an experimental platformand conducted comprehensive assessments.Empirical results demonstrate that ECSS attains superior network scalability and stability,reducing communication overhead by an impressive 72% and total storage costs by a substantial 63.6%.

Blind Recognition of Non-Binary LDPC Codes Based on Ant Colony Optimization

This paper introduces a novel blind recognition of non-binary low-density parity-check(LDPC)codes without a candidate set,using ant colony optimization(ACO)algorithm over additive white Gaussian noise(AWGN)channels.Specifically,the scheme that effectively combines the ACO algorithm and the non-binary elements over finite fields is proposed.Furthermore,an improved,simplified elitist ACO algorithm based on soft decision reliability is introduced to recognize the parity-check matrix over noisy channels.Simulation results show that the recognition rate continuously increases with an increased signalto-noise ratio(SNR)over the AWGN channel.

Variational Learned Talking-Head Semantic Coded Transmission System

Video transmission requires considerable bandwidth,and current widely employed schemes prove inadequate when confronted with scenes featuring prominently.Motivated by the strides in talkinghead generative technology,the paper introduces a semantic transmission system tailored for talking-head videos.The system captures semantic information from talking-head video and faithfully reconstructs source video at the receiver,only one-shot reference frame and compact semantic features are required for the entire transmission.Specifically,we analyze video semantics in the pixel domain frame-by-frame and jointly process multi-frame semantic information to seamlessly incorporate spatial and temporal information.Variational modeling is utilized to evaluate the diversity of importance among group semantics,thereby guiding bandwidth resource allocation for semantics to enhance system efficiency.The whole endto-end system is modeled as an optimization problem and equivalent to acquiring optimal rate-distortion performance.We evaluate our system on both reference frame and video transmission,experimental results demonstrate that our system can improve the efficiency and robustness of communications.Compared to the classical approaches,our system can save over 90%of bandwidth when user perception is close.