Unveiling a novel metal-to-metal transition in LuH_(2):Critically challenging superconductivity claims in lutetium hydrides

Following the recent report by Dasenbrock-Gammon et al.[Nature 615,244–250(2023)]of near-ambient superconductivity in nitrogendoped lutetium trihydride(LuH_(3-δ)N_(ε)),significant debate has emerged surrounding the composition and interpretation of the observed sharp resistance drop.Here,we meticulously revisit these claims through comprehensive characterization and investigations.We definitively identify the reported material as lutetium dihydride(LuH_(2)),resolving the ambiguity surrounding its composition.Under similar conditions(270–295 K and 1–2 GPa),we replicate the reported sharp decrease in electrical resistance with a 30%success rate,aligning with the observations by Dasenbrock-Gammon et al.However,our extensive investigations reveal this phenomenon to be a novel pressure-induced metal-to-metal transition intrinsic to LuH_(2),distinct from superconductivity.Intriguingly,nitrogen doping exerts minimal impact on this transition.Our work not only elucidates the fundamental properties of LuH_(2)andLuH_(3),but also critically challenges the notion of superconductivity in these lutetium hydride systems.These findings pave the way for future research on lutetium hydride systems,while emphasizing the crucial importance of rigorous verification in claims of ambient-temperature superconductivity.

Phase-field simulations of the effect of temperature and interface for zirconiumδ-hydrides

Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we have developed a phasefield model based on the assumption of elastic behaviour within a specific temperature range(613 K-653 K).This model allows us to study the influence of temperature and interfacial effects on the morphology,stress,and average growth rate of zirconium hydride.The results suggest that changes in temperature and interfacial energy influence the length-to-thickness ratio and average growth rate of the hydride morphology.The ultimate determinant of hydride orientation is the loss of interfacial coherency,primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree q.An escalation in interfacial coherency loss leads to a transition of hydride growth from horizontal to vertical,accompanied by the onset of redirection behaviour.Interestingly,redirection occurs at a critical mismatch level,denoted as qc,and remains unaffected by variations in temperature and interfacial energy.However,this redirection leads to an increase in the maximum stress,which may influence the direction of hydride crack propagation.This research highlights the importance of interfacial coherency and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys.

Some Rare Earth Metallic Organohydrides with Biindenyl as the Ligand

Introduction It is well known that organometallic hydrides of rare earth metals are the catalysts and reducing reagents for the catalysis polymerization of alkenes and the catalysis hydrogenation of alkenoalkynes. There are four methods for the syntheses of organometallic hydrides of rare earth metals:（1） the thermal atomization of metals, i.e., the interaction of a rare earth metal with alkenes with a terminal alkyne;（2） the Ln—Cσ bond is broken with H;;（3） metal-

Lithium ion conductivity of complex hydrides incorporating multiple closo–type complex anions

We report the lithium ionic conductivities of closo –type complex hydrides synthesized from various molar ratios of lithium borohydride(LiBH4) and decaborane(B10H14) as starting materials. The prepared closo –type complex hydrides comprised [B12H12]^2-, [B11H11]^2-, and [B10H10]^2- complex anions. In addition, increasing the LiBH4 content in the starting materials increased the amounts of [B11H11]^2- and [B10H10]^2-, leading to an improved ion conductivity of the prepared sample. The present study offers useful insights into strategies for controlling the complex anion composition in emerging solid electrolytes of closo-type complex hydrides at the molecular level, and improving their ionic conductivities.

Study of δ-hydrides in Ti-2Al-2.5Zr and Ti-4Al-2V alloys

The α alloy Ti-2Al-2.5Zr and near α alloy Ti-4Al-2V were hydrogenated to various levels. The morphology, orientation relation （OR）, and habit plane of the hydrides were studied by means of transmission electron microscopy （TEM）. It was found that in the two alloys most of the precipitates are δ-hydrides which have fcc structure with the lattice parameter a = 0.44 nm. Two basic orientation relationships and habit planes of the precipitates are determined. Twin structure was observed in both alloys.

Perspectives and challenges of hydrogen storage in solid-state hydrides

Hydrogen has been widely considered as a clean energy carrier that bridges the energy producers and energy consumers in an efficient and safe way for a sustainable society.Hydrogen can be stored in a gas,liquid and solid states and each method has its unique advantage.Though compressed hydrogen and liquefied hydrogen are mature technologies for industrial applications,appropriate measures are necessary to deal with the issues at high pressure up to around 100 MPa and low temperature at around 20 K.Distinct from those technologies,storing hydrogen in solid-state hydrides can realize a more compact and much safer approach that does not require high hydrogen pressure and cryogenic temperature.In this review,we will provide an overview of the majormaterial groups that are capable of absorbing and desorbing hydrogen reversibly.The main features on hydrogen storage properties of each material group are summarized,together with the discussion of the key issues and the guidance of materials design,aiming at providing insights for new material development as well as industrial applications.

Crystal structure evolution of complex metal aluminum hydrides upon hydrogen release

Complex aluminum hydrides have been widely studied as potential hydrogen storage materials but also,for some time now, for electrochemical applications. This review summarizes the crystal structures of alkali and alkaline earth aluminum hydrides and correlates structure properties with physical and chemical properties of the hydride compounds. The crystal structures of the alkali metal aluminum hydrides change significantly during the stepwise dehydrogenation. The general pathway follows a transformation of structures built of isolated [AlH4]- tetrahedra to structures built of isolated [Al H6]3- octahedra.The crystal structure relations in the group of alkaline earth metal aluminum hydrides are much more complicated than those of the alkali metal aluminum hydrides. The structures of the alkaline earth metal aluminum hydrides consist of isolated tetrahedra but the intermediate structures exhibit chains of cornershared octahedra. The coordination numbers within the alkali metal group increase with cation sizes which goes along with an increase of the decomposition temperatures of the primary hydrides. Alkaline earth metal hydrides have higher coordination numbers but decompose at slightly lower temperatures than their alkali metal counterparts. The decomposition pathways of alkaline metal aluminum hydrides have not been studied in all cases and require future research.

Superconductivity in La and Y hydrides: Remaining questions to experiment and theory

Recent reports of the superconductivity in hydrides of two different families(covalent lattice,as in SH3 and clathrate-type H-cages containing La and Y atoms,as in LaH10 and YH6)have revealed new families of high-Tc materials with Tc’s near room temperature values.These findings confirm earlier expectations that hydrides may have very high Tc’s due to the fact that light H atoms have very high vibrational frequencies,leading to high Tc values within the conventional Bardeen–Cooper–Schrieffer phonon mechanism of superconductivity.However,as is pointed out by Ashcroft,it is important to have the metallic hydrogen“alloyed”with the elements added to it.This concept of a metallic alloy containing a high concentration of metal-like hydrogen atoms has been instrumental in finding new high-Tc superhydrides.These new superhydride“roomtemperature”superconductors are stabilized only at very high pressures above 100 GPa,making the experimental search for their superconducting properties very difficult.We will review the current experimental and theoretical results for LaH10−x and YH6−x superhydrides.

Study on the Atomization Mechanism of Hydrides in Graphite Furnace Atomizers

The influence of the surface state of the graphite furnace atomizer on the atomization of hydrides has been studied by means of surface film coating and quantum chemistry CN-DO/2 calculations. The results of the study prove that the atomization of AsH3, SbH3 and BiH3 in the graphite furnace atomizer is not a simple gas phase pyrolytic process, but a surface catalysis pyrolytic process.

Unexpected formation of hydrides in heavy rare earth containing magnesium alloys

Mg–RE(Dy,Gd,Y)alloys show promising for being developed as biodegradable medical applications.It is found that the hydride REH_(2) could be formed on the surface of samples during their preparations with water cleaning.The amount of formed hydrides in Mg–RE alloys is affected by the content of RE and heat treatments.It increases with the increment of RE content.On the surface of the alloy with T4 treatment the amount of formed hydride REH_(2) is higher.In contrast,the amount of REH2 is lower on the surfaces of as-cast and T6-treated alloys.Their formation mechanism is attributed to the surface reaction of Mg–RE alloys with water.The part of RE in solid solution in Mg matrix plays an important role in influencing the formation of hydrides.

Clear evidence against superconductivity in hydrides under high pressure

The Meissner effect,magnetic field expulsion,is a hallmark of superconductivity.Associated with it,superconductors exclude applied magnetic fields.Recently,Minkov et al.[Nat.Commun.13,3194(2022)]presented experimental results reportedly showing“definitive evidence of the Meissner effect”in sulfur hydride and lanthanum hydride under high pressure,and Eremets et al.[J.Supercond.Nov.Magn.35,965(2022)]argued that“the arguments against superconductivity(in hydrides)can be either refuted or explained.”Instead,we show here that the evidence presented in those papers does not support the case for superconductivity in these materials.Together with experimental evidence discussed in earlier papers,we argue that this strongly suggests that hydrides under pressure are not high-temperature superconductors.

The Structures and Properties of Y-Substituted Mg2Ni Alloys and Their Hydrides: A First-Principles Study

The structures and properties of Y-substituted Mg2Ni alloys and the corresponding hydrides are investigated by a first-principles plane-wave pseudopotential method within density functional theory. Results show that Mg2Ni has the best structural stability when Y atom occupies the Mg(6f) lattice sites. The calculated enthalpies of formation for Mg2Ni, Mg2NiH4 and Mg15YNi8H32 are -51.612, -64.667 and -62.554 kJ/mol, respectively. It is implied that the substitution of Y alloying destabilizes the stability of the hydrides. Moreover, the dissociated energies of H atoms are decreased significantly, indicating that Y alloying benefits the improvement of the dehydrogenating properties of Mg2Ni hydrides. The calculation and analysis of the electronic structures suggest that there is a stronger interaction between H and Ni atoms than the interaction between H and Mg atoms in Mg2NiH4. However, the Ni-H bond is weakened by the substitution of Y. Therefore, the substitution is an effective technique to decrease the structural stability of the hydrides and benefit for hydrogen storage.

IN-SITU ELECTRON MICROSCOPY STUDY ON PRECIPITATION OF ZIRCONIUM HYDRIDES INDUCED BY STRESS AND STRAIN IN ZIRCALOY-2

The precipitation process of zirconium hydrides induced by stress and strain was investigated by means of electron microscopy in-situ.The precipitating hydrides induced by stress were found to be γ phase with orientation relationship of (110)_γ‖(110)_(αZr),(001)_γ‖ (0001)_(αZr) between γ-hydrides and surrounding matrix.The growth rate of γ-hydrides which was much faster along [110] direction brought them in taper shape.After fracture of y-hydrides,a new one will precipitate at the tip of cracks.This is the essential process of hydrogen-induced delayed cracking in Zircaloy.The precipitating hydrides induced by strain were found to be δ phase with both orientation relationships of(111)_δ‖(0001)_(αZr),(110)_δ‖ (110)_(αZr) or (010)_δ‖(0001)_(αZr),(001)_δ‖(110)_(αZr)between δ-hydride and surrounding matrix.The δ-hydrides become much finer as the strain rate increased.

STRUCTURE OF HYDRIDES IN HIGHLY HYDROGENATED Ti-6Al-4V ALLOY

The microstrueture and various hydrides precipitated in Ti-6A1-4V alloys containing hydrogen 0.16,0.58,0.87,1.49 wt-%,respectively,have been studied by means of TEM and X-ray diffraction.The Ti_3Al phase may precipitate when H over 0.58 wt-%.In the same time,the morphology of hydrides gradually changed from rugged sheets to narrow laths as H contents increased.The microstructure of highly H-doped alloys is obviously fine.A mas- sive hydride and the hydride with tetragonal lattice were observed in the specimen containing 1.49 wt-%H.The twin hydrides were found in the alloys with different H contents and the electron diffraction patterns of the twin hydrides can be served as a simple criterion for distin- guishing the cubic and tetragonal structures.

Ab initio study of H and He migrations in β-phase Sc,Y,and Er hydrides

Ab initio calculations based on the density functional theory have been performed to investigate the migrations of hydrogen（H） and helium（He） atoms in β-phase scandium（Sc）,yttrium（Y）,and erbium（Er） hydrides with three different ratios of H to metal.The results show that the migration mechanisms of H and He atoms mainly depend on the crystal structures of hydrides,but their energy barriers are affected by the host-lattice in metal hydrides.The formation energies of octahedral-occupancy H（H oct） and tetrahedral vacancy（V tet） pairs are almost the same（about 1.2 eV）.It is of interest to note that the migration barriers of H increase with increasing host-lattice atomic number.In addition,the results show that the favorable migration mechanism of He depends slightly on the V tet in the Sc hydride,but strongly on that in the Y and Er hydrides,which may account for different behaviours of initial He release from ScT2 and ErT2.

First-principles study of the elastic and thermodynamic properties of thorium hydrides at high pressure

The high pressure behaviors of Th_4H_（15） and ThH_2 are investigated by using the first-principles calculations based on the density functional theory（DFT）. From the energy–volume relations, the bct phase of ThH_2 is more stable than the fcc phase at ambient conditions. At high pressure, the bct ThH_2 and bcc Th_4H（15） phases are more brittle than they are at ambient pressure from the calculated elastic constants and the Poisson ratio. The thermodynamic stability of the bct phase ThH_2 is determined from the calculated phonon dispersion. In the pressure domain of interest, the phonon dispersions of bcc Th_4H（15） and bct ThH_2 are positive, indicating the dynamical stability of these two phases, while the fcc ThH_2 is unstable. The thermodynamic properties including the lattice vibration energy, entropy, and specific heat are predicted for these stable phases. The vibrational free energy decreases with the increase of the temperature, and the entropy and the heat capacity are proportional to the temperature and inversely proportional to the pressure. As the pressure increases, the resistance to the external pressure is strengthened for Th_4H_（15） and ThH_2.

A MATHEMATICAL MODEL FOR THE STABILITY OF THEHYDRIDES OF Ca CONTAINING RNi_5 COMPOUNDS

In this paper, a mathematical model for the stability of hydrides of Ca containing compounds was proposed on the basis of introducing the geometrical and electric factors. The data on (R, Ca)Ni5 compounds are in good agreement with the theoretical curve obtained from the model. For Ml1-x CaxNi5 compounds, the variation of dissociation pressure with cell volume is the joint effects of geometrical and electric factors, and the controlling factor changes gradually from geometrical factor to electric factor with increasing x.

Deflagration characteristics of freely propagating flames in magnesium hydride dust clouds

The flame propagation processes of MgH_(2)dust clouds with four different particle sizes were recorded by a high-speed camera.The dynamic flame temperature distributions of MgH_(2)dust clouds were reconstructed by the two-color pyrometer technique,and the chemical composition of solid combustion residues were analyzed.The experimental results showed that the average flame propagation velocities of 23μm,40μm,60μm and 103μm MgH_(2)dust clouds in the stable propagation stage were 3.7 m/s,2.8 m/s,2.1 m/s and 0.9 m/s,respectively.The dust clouds with smaller particle sizes had faster flame propagation velocity and stronger oscillation intensity,and their flame temperature distributions were more even and the temperature gradients were smaller.The flame structures of MgH_(2)dust clouds were significantly affected by the particle sinking velocity,and the combustion processes were accompanied by micro-explosion of particles.The falling velocities of 23μm and 40μm MgH_(2)particles were 2.24 cm/s and 6.71 cm/s,respectively.While the falling velocities of 60μm and 103μm MgH_(2)particles were as high as 15.07 cm/s and 44.42 cm/s,respectively,leading to a more rapid downward development and irregular shape of the flame.Furthermore,the dehydrogenation reaction had a significant effect on the combustion performance of MgH_(2)dust.The combustion of H_(2)enhanced the ignition and combustion characteristics of MgH_(2)dust,resulting in a much higher explosion power than the pure Mg dust.The micro-structure characteristics and combustion residues composition analysis of MgH_(2)dust indicated that the combustion control mechanism of MgH_(2)dust flame was mainly the heterogeneous reaction,which was affected by the dehydrogenation reaction.

Recent progress in thermodynamic and kinetics modification of magnesium hydride hydrogen storage materials

Hydrogen energy has emerged as a pivotal solution to address the global energy crisis and pave the way for a cleaner,low-carbon,secure,and efficient modern energy system.A key imperative in the utilization of hydrogen energy lies in the development of high-performance hydrogen storage materials.Magnesium-based hydrogen storage materials exhibit remarkable advantages,including high hydrogen storage density,cost-effectiveness,and abundant magnesium resources,making them highly promising for the hydrogen energy sector.Nonetheless,practical applications of magnesium hydride for hydrogen storage face significant challenges,primarily due to their slow kinetics and stable thermodynamic properties.Herein,we briefly summarize the thermodynamic and kinetic properties of MgH2,encompassing strategies such as alloying,nanoscaling,catalyst doping,and composite system construction to enhance its hydrogen storage performance.Notably,nanoscaling and catalyst doping have emerged as more effective modification strategies.The discussion focuses on the thermodynamic changes induced by nanoscaling and the kinetic enhancements resulting from catalyst doping.Particular emphasis lies in the synergistic improvement strategy of incorporating nanocatalysts with confinement materials,and we revisit typical works on the multi-strategy optimization of MgH2.In conclusion,we conduct an analysis of outstanding challenges and issues,followed by presenting future research and development prospects for MgH2 as hydrogen storage materials.

Magnetocrystalline Anisotropies of RFe_(10)V_2 (R=Y, Tb, Dy, Ho, and Er) and Their Hydrides

The magnetocrystalline anisotropies of RFe10V2 (R=Y, Tb, Dy, Ho and Er) and their hydrides were studied by X-ray diffraction, magnetization and a.c. susceptibility measurements. The uniaxial anisotropy of Fe-sublattice and R-sublattice with positive second order Stevens αJ in RFe10V2 compounds is weakened by hydrogenation, while that of R-sublattice with negative αJ (Er) enhanced. Such a change of anisotropy causes planar-easy magnetic structures in RFe10V2 (R=Tb and Dy) at room temperature and induces spin reorientation in HoFe10V2 after hydrogenation. The change of anisotropy of R-sublattice after hydrogenation may be owed to a decrease of the second order crystalline coefficient.