Simulations from Laboratory Sourceless Object Counting System （LabSOCS） software were used to determine self-attenuation correction factor, which is defined as the efficiency ratio of the sample with the absorbing m...Simulations from Laboratory Sourceless Object Counting System （LabSOCS） software were used to determine self-attenuation correction factor, which is defined as the efficiency ratio of the sample with the absorbing medium to that of the sample without absorbing medium. The semi-empirical self-attenuation correction formula F（μ） used to correct self-attenuation of a sample was applied. A comparison of the two methods reveals that formula of sample with φb75 mm× 25 mm and φ75 min×10 mm can be, respectively, used in the self-attenuation correction for p in the ranges of 0 to 0.5 cm-1 and 0.5 cm-1 to 2.0 cm-1, indicating that the semi-empirical formula will not be used when # has exceeded the interval. The semi-empirical formula value is consistent with the experimental value, within 7.9% accuracy. Therefore, this method is correct and effective. Both of our two methods can accurately produce a relative self-attenuation correction factor when the composition of the sample is known. The self-attenuation correction of a sample with unknown composition can only be carried out using a semi-empirical formula method.展开更多
This study reports the performances of efficiency calibrations for high-purity-germanium gamma-ray spectrometry using the source-, Laboratory Sourceless Object Calibration Software(LabSOCS)-and ANGLE-based methods in ...This study reports the performances of efficiency calibrations for high-purity-germanium gamma-ray spectrometry using the source-, Laboratory Sourceless Object Calibration Software(LabSOCS)-and ANGLE-based methods in an inter-comparison exercise. Although the results of LabSOCS and ANGLE for ^(241)Am emitting lowenergy gamma rays were not very satisfactory, all of the three efficiency calibration methods passed acceptance criteria. The results confirmed the reliability of the calculation codes ANGLE and LabSOCS as alternative efficiency calibration methods in high-purity-germanium gamma spectrometry. This study is likely to promote the further application of the ANGLE and LabSOCS calculation codes in radioactivity measurements.展开更多
基金Supported by National Natural Science Foundation of China(11105106,11275150,11175142,11275154)
文摘Simulations from Laboratory Sourceless Object Counting System （LabSOCS） software were used to determine self-attenuation correction factor, which is defined as the efficiency ratio of the sample with the absorbing medium to that of the sample without absorbing medium. The semi-empirical self-attenuation correction formula F（μ） used to correct self-attenuation of a sample was applied. A comparison of the two methods reveals that formula of sample with φb75 mm× 25 mm and φ75 min×10 mm can be, respectively, used in the self-attenuation correction for p in the ranges of 0 to 0.5 cm-1 and 0.5 cm-1 to 2.0 cm-1, indicating that the semi-empirical formula will not be used when # has exceeded the interval. The semi-empirical formula value is consistent with the experimental value, within 7.9% accuracy. Therefore, this method is correct and effective. Both of our two methods can accurately produce a relative self-attenuation correction factor when the composition of the sample is known. The self-attenuation correction of a sample with unknown composition can only be carried out using a semi-empirical formula method.
基金supported by the Support Program of the Ministry of Science and Technology(No.2014FY211000)the National Key Technology Research and Development Program(No.2013BAK03B05)
文摘This study reports the performances of efficiency calibrations for high-purity-germanium gamma-ray spectrometry using the source-, Laboratory Sourceless Object Calibration Software(LabSOCS)-and ANGLE-based methods in an inter-comparison exercise. Although the results of LabSOCS and ANGLE for ^(241)Am emitting lowenergy gamma rays were not very satisfactory, all of the three efficiency calibration methods passed acceptance criteria. The results confirmed the reliability of the calculation codes ANGLE and LabSOCS as alternative efficiency calibration methods in high-purity-germanium gamma spectrometry. This study is likely to promote the further application of the ANGLE and LabSOCS calculation codes in radioactivity measurements.
