A Modified Lagrange Method for Solving Convex Quadratic Optimization Problems

In this paper, a modified version of the Classical Lagrange Multiplier method is developed for convex quadratic optimization problems. The method, which is evolved from the first order derivative test for optimality of the Lagrangian function with respect to the primary variables of the problem, decomposes the solution process into two independent ones, in which the primary variables are solved for independently, and then the secondary variables, which are the Lagrange multipliers, are solved for, afterward. This is an innovation that leads to solving independently two simpler systems of equations involving the primary variables only, on one hand, and the secondary ones on the other. Solutions obtained for small sized problems (as preliminary test of the method) demonstrate that the new method is generally effective in producing the required solutions.

能量泛函及Euler-Lagrange方程在图像降噪中的应用研究

研究了自适应分数阶偏微分方程修正模型的能量泛函及Euler-Lagrange方程。首先,定义了自适应分数阶偏微分方程修正模型的能量泛函,其中包含未知函数和拉格朗日乘子的集合。然后,通过求解能量泛函的极值方程,推导出了Euler-Lagrange方程。最后,讨论了Euler-Lagrange方程在自适应分数阶偏微分方程修正模型中的应用。

基于LAGRANGE方程的深水钻井隔水管–水下井口系统动力分析

为了探究大质量、大刚度防喷器组(blowout preventers,BOPs)对深水钻井隔水管系统动态相应预测精度的影响,根据细长钻井隔水管与刚性防喷器组的结构特点,提出两者刚柔耦合的概念,采用能量法推导隔水管–防喷器组–水下井口系统的动能和势能,采用LAGRANGE方法建立耦合系统动力学理论模型,采用科学计算软件和Newmark-β直接积分法对动力学模型进行数值计算。以南海某深水钻井隔水管为例,开展基于耦合动力学模型的隔水管系统动态响应分析。结果表明,采用本文理论模型得到的隔水管不同位置的节点位移、单元弯矩、上部和下部挠性接头转角时程曲线、整体侧向位移包络线和弯矩包络线等与ABAQUS仿真结果均吻合良好,最大误差为8.8%。此方法可为深水钻井隔水管和水下井口系统动态分析提供参考。

An Efficient Reliability-Based Optimization Method Utilizing High-Dimensional Model Representation and Weight-Point Estimation Method

The objective of reliability-based design optimization(RBDO)is to minimize the optimization objective while satisfying the corresponding reliability requirements.However,the nested loop characteristic reduces the efficiency of RBDO algorithm,which hinders their application to high-dimensional engineering problems.To address these issues,this paper proposes an efficient decoupled RBDO method combining high dimensional model representation(HDMR)and the weight-point estimation method(WPEM).First,we decouple the RBDO model using HDMR and WPEM.Second,Lagrange interpolation is used to approximate a univariate function.Finally,based on the results of the first two steps,the original nested loop reliability optimization model is completely transformed into a deterministic design optimization model that can be solved by a series of mature constrained optimization methods without any additional calculations.Two numerical examples of a planar 10-bar structure and an aviation hydraulic piping system with 28 design variables are analyzed to illustrate the performance and practicability of the proposed method.

Euler’s First-Order Explicit Method–Peridynamic Differential Operator for Solving Population Balance Equations of the Crystallization Process

Using Euler’s first-order explicit(EE)method and the peridynamic differential operator(PDDO)to discretize the time and internal crystal-size derivatives,respectively,the Euler’s first-order explicit method–peridynamic differential operator(EE–PDDO)was obtained for solving the one-dimensional population balance equation in crystallization.Four different conditions during crystallization were studied:size-independent growth,sizedependent growth in a batch process,nucleation and size-independent growth,and nucleation and size-dependent growth in a continuous process.The high accuracy of the EE–PDDO method was confirmed by comparing it with the numerical results obtained using the second-order upwind and HR-van methods.The method is characterized by non-oscillation and high accuracy,especially in the discontinuous and sharp crystal size distribution.The stability of the EE–PDDO method,choice of weight function in the PDDO method,and optimal time step are also discussed.

Energy Stable Nodal DG Methods for Maxwell’s Equations of Mixed-Order Form in Nonlinear Optical Media

In this work,we develop energy stable numerical methods to simulate electromagnetic waves propagating in optical media where the media responses include the linear Lorentz dispersion,the instantaneous nonlinear cubic Kerr response,and the nonlinear delayed Raman molecular vibrational response.Unlike the first-order PDE-ODE governing equations considered previously in Bokil et al.(J Comput Phys 350:420–452,2017)and Lyu et al.(J Sci Comput 89:1–42,2021),a model of mixed-order form is adopted here that consists of the first-order PDE part for Maxwell’s equations coupled with the second-order ODE part(i.e.,the auxiliary differential equations)modeling the linear and nonlinear dispersion in the material.The main contribution is a new numerical strategy to treat the Kerr and Raman nonlinearities to achieve provable energy stability property within a second-order temporal discretization.A nodal discontinuous Galerkin(DG)method is further applied in space for efficiently handling nonlinear terms at the algebraic level,while preserving the energy stability and achieving high-order accuracy.Indeed with d_(E)as the number of the components of the electric field,only a d_(E)×d_(E)nonlinear algebraic system needs to be solved at each interpolation node,and more importantly,all these small nonlinear systems are completely decoupled over one time step,rendering very high parallel efficiency.We evaluate the proposed schemes by comparing them with the methods in Bokil et al.(2017)and Lyu et al.(2021)(implemented in nodal form)regarding the accuracy,computational efficiency,and energy stability,by a parallel scalability study,and also through the simulations of the soliton-like wave propagation in one dimension,as well as the spatial-soliton propagation and two-beam interactions modeled by the two-dimensional transverse electric(TE)mode of the equations.

时间分数阶Black-Scholes方程的重心Lagrange插值配点法

针对欧式期权定价的时间分数阶Black-Scholes模型,设计一种重心Lagrange插值配点法格式.首先,采用Laplace变换近似Caputo型分数阶导数,将分数阶方程转化为整数阶方程;然后,在时-空方向上均采用重心Lagrange插值配点法进行离散,构造重心Lagrange插值配点法格式.结果表明:时间分数阶Black-Scholes方程的重心Lagrange插值配点法具有高精度和有效性.

The forecasting efficiency under different selected regions by Pattern Informatics Method and seismic potential estimation in the North-South Seismic Zone

In 2022,four earthquakes with M_(S)≥6.0 including the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes occurred in the North-South Seismic Zone(NSSZ),which demonstrated high and strong seismicity.Pattern Informatics(PI)method,as an effective long and medium term earthquake forecasting method,has been applied to the strong earthquake forecasting in Chinese mainland and results have shown the positive performance.The earthquake catalog with magnitude above M_(S)3.0 since 1970 provided by China Earthquake Networks Center was employed in this study and the Receiver Operating Characteristic(ROC)method was applied to test the forecasting efficiency of the PI method in each selected region related to the North-South Seismic Zone systematically.Based on this,we selected the area with the best ROC testing result and analyzed the evolution process of the PI hotspot map reflecting the small seismic activity pattern prior to the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes.A“forward”forecast for the area was carried out to assess seismic risk.The study shows the following.1)PI forecasting has higher forecasting efficiency in the selected study region where the difference of seismicity in any place of the region is smaller.2)In areas with smaller differences of seismicity,the activity pattern of small earthquakes prior to the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes can be obtained by analyzing the spatio-temporal evolution process of the PI hotspot map.3)The hotspot evolution in and around the southern Tazang fault in the study area is similar to that prior to the strong earthquakes,which suggests the possible seismic hazard in the future.This study could provide some ideas to the seismic hazard assessment in other regions with high seismicity,such as Japan,Californi,Turkey,and Indonesia.

Research on the Application of Montessori Education Method in Cognitive Training of Patients with Alzheimer’s Disease

Objective:To study the application of the Montessori education method in cognitive training in patients with Alzheimer’s disease(AD).Methods:40 cases of senile dementia patients who were admitted to our hospital from January 2022 to January 2023 were selected and randomly divided into an intervention group and a control group according to the single and double number table method,with 20 cases in each group.The intervention group used the Montessori education method,the principle of which was to implement individualized health interventions based on the individual conditions of the patients,for a period of 6 months;the control group was given conventional treatment and nursing of the disease.The Mini-Mental State Examination(MMSE)was used to compare the effects of the two groups of patients before and after health intervention and conduct statistical analysis.Results:The score of the intervention group was higher than that of the control group,and there was a statistical difference between the two(P<0.05).Conclusion:Implementing the Montessori education method for diagnosed Alzheimer’s patients can effectively improve their cognitive function and delay the progress of further dementia.

Critical care nurses and their clinical reasoning for customizing monitor alarms:a mixed-method study

Objective:To explore the clinical rationale of critical care nurses for personalizing monitor alarms.One of the most crucial jobs assigned to critical care nurses is monitoring patients'physiological indicators and carrying out the necessary associated interventions.Successful use of equipment in the nursing practice environment will be improved by a thorough understanding of the nurse's approach to alarm configuration.Methods:A mixed-method design integrating quantitative and qualitative components was used.The sample of this study recruited a convenience sample of 60 nurses who have worked in critical care areas.This study took place at Lebanese American University Medical Center Rizk Hospital,utilizing a semi-structured interview with participants.Results:The study demonstrated the high incidence of nuisance alarms and the desensitization of critical care nurses to vital ones.According to the nurses,frequent false alarms and a shortage of staff are the 2 main causes of alarm desensitization.Age was significantly associated with the perception of Smart alarms,according to the data(P=0.03).Four interconnected themes and subcategories that reflect the clinical reasoning process for alarm customization were developed as a result of the study's qualitative component:(1)unit alarm environment;(2)nursing style;(3)motivation to customize;and(4)clinical and technological customization.Conclusions:According to this study,nurses believe that alarms are valuable.However,a qualitative analysis of the experiences revealed that customization has been severely limited since the healthcare team depends on nurses to complete these tasks independently.Additionally,a staffing shortage and lack of technical training at the start of placement have also hindered customization.

Secured Health Data Transmission Using Lagrange Interpolation and Artificial Neural Network

In recent decades,the cloud computing contributes a prominent role in health care sector as the patient health records are transferred and collected using cloud computing services.The doctors have switched to cloud computing as it provides multiple advantageous measures including wide storage space and easy availability without any limitations.This necessitates the medical field to be redesigned by cloud technology to preserve information about patient’s critical diseases,electrocardiogram(ECG)reports,and payment details.The proposed work utilizes a hybrid cloud pattern to share Massachusetts Institute of Technology-Beth Israel Hospital(MIT-BIH)resources over the private and public cloud.The stored data are categorized as significant and non-significant by Artificial Neural Networks(ANN).The significant data undergoes encryption by Lagrange key management which automatically generates the key and stores it in the hidden layer.Upon receiving the request from a secondary user,the primary user verifies the authentication of the request and transmits the key via Gmail to the secondary user.Once the key matches the key in the hidden layer,the preserved information will be shared between the users.Due to the enhanced privacy preserving key generation,the proposed work prevents the tracking of keys by malicious users.The outcomes reveal that the introduced work provides improved success rate with reduced computational time.

Modified Augmented Lagrange Multiplier Methods for Large-Scale Chemical Process Optimization

Chemical process optimization can be described as large-scale nonlinear constrained minimization. The modified augmented Lagrange multiplier methods (MALMM) for large-scale nonlinear constrained minimization are studied in this paper. The Lagrange function contains the penalty terms on equality and inequality constraints and the methods can be applied to solve a series of bound constrained sub-problems instead of a series of unconstrained sub-problems. The steps of the methods are examined in full detail. Numerical experiments are made for a variety of problems, from small to very large-scale, which show the stability and effectiveness of the methods in large-scale problems.

Modified Lagrange Multiplier Method and Generalized Variational Principle in Fluid Mechanics

The Lagrange multiplier method plays an important role in establishing generalized variational principles notonly in tluid mechallics. but also in elasticity. Sometimes, however, one may come across variational crisis(somemultipliers vanish identically). failing to achieve his aim. The crisis is caused by the fact that the Inultipliers are treatedas independent variables in the process of variatioll. but after identification they become functions of the originalindependent variables. To overcome it, a Inodified Lagrange multiplier method or semi-inverse method has beenproposed to deduce generalized varistional principles. Some e-camples are given to illustrate its convenience andeffectiveness of the novel method.

Accelerated Matrix Recovery via Random Projection Based on Inexact Augmented Lagrange Multiplier Method

In this paper, a unified matrix recovery model was proposed for diverse corrupted matrices. Resulting from the separable structure of the proposed model, the convex optimization problem can be solved efficiently by adopting an inexact augmented Lagrange multiplier (IALM) method. Additionally, a random projection accelerated technique (IALM+RP) was adopted to improve the success rate. From the preliminary numerical comparisons, it was indicated that for the standard robust principal component analysis (PCA) problem, IALM+RP was at least two to six times faster than IALM with an insignificant reduction in accuracy; and for the outlier pursuit (OP) problem, IALM+RP was at least 6.9 times faster, even up to 8.3 times faster when the size of matrix was 2 000×2 000.

CONTACT MODEL BASED ON AUGMENTED LAGRANGE METHOD AND ITS ENGINEERING APPLICATION

A kind of improved contact frictional model on basis of traditional Coulomb Friction model is adopted. Corresponding contact element is also given. The contact algorithm on basis of augmented Lagrange method is introduced and successfully applied to complex contact friction problem. Test example and actual engineering case all show that the algorithm of the model is efficient and computation results agree well with general rules.

Distributed Lagrange Multiplier/Fictitious Domain Finite Element Method for a Transient Stokes Interface Problem with Jump Coefficients

The distributed Lagrange multiplier/fictitious domain(DLM/FD)-mixed finite element method is developed and analyzed in this paper for a transient Stokes interface problem with jump coefficients.The semi-and fully discrete DLM/FD-mixed finite element scheme are developed for the first time for this problem with a moving interface,where the arbitrary Lagrangian-Eulerian(ALE)technique is employed to deal with the moving and immersed subdomain.Stability and optimal convergence properties are obtained for both schemes.Numerical experiments are carried out for different scenarios of jump coefficients,and all theoretical results are validated.

A Parameter-Free Approach to Determine the Lagrange Multiplier in the Level Set Method by Using the BESO

A parameter-free approach is proposed to determine the Lagrange multiplier for the constraint of material volume in the level set method.It is inspired by the procedure of determining the threshold of sensitivity number in the BESO method.It first computes the difference between the volume of current design and the upper bound of volume.Then,the Lagrange multiplier is regarded as the threshold of sensitivity number to remove the redundant material.Numerical examples proved that this approach is effective to constrain the volume.More importantly,there is no parameter in the proposed approach,which makes it convenient to use.In addition,the convergence is stable,and there is no big oscillation.

Comparison of Numerical Approximations of One-Dimensional Space Fractional Diffusion Equation Using Different Types of Collocation Points in Spectral Method Based on Lagrange’s Basis Polynomials

Recently many research works have been conducted and published regarding fractional order differential equations. There are several approaches available for numerical approximations of the solution of fractional order diffusion equations. Spectral collocation method based on Lagrange’s basis polynomials to approximate numerical solutions of one-dimensional (1D) space fractional diffusion equations are introduced in this research paper. The proposed form of approximate solution satisfies non-zero Dirichlet’s boundary conditions on both boundaries. Collocation scheme produce a system of first order Ordinary Differential Equations (ODE) from the fractional diffusion equation. We applied this method with four different sets of collocation points to compare their performance.

Fully Coupled Fluid-Structure Interaction Model Based on Distributed Lagrange Multiplier/Fictitious Domain Method

This paper, with a finite element method, studies the interaction of a coupled incompressible fluid-rigid structure system with a free surface subjected to external wave excitations. With this fully coupled model, the rigid structure is taken as ＂fictitious＂ fluid with zero strain rate. Both fluid and structure are described by velocity and pressure. The whole domain, including fluid region and structure region, is modeled by the incompressible Navier-Stokes equations which are discretized with fixed Eulerian mesh. However, to keep the structure＇ s rigid body shape and behavior, a rigid body constraint is enforced on the ＂fictitious＂ fluid domain by use of the Distributed Lagrange Multipher/Fictitious Domain （DLM/ FD） method which is originally introduced to solve particulate flow problems by Glowinski et al. For the verification of the model presented herein, a 2D numerical wave tank is established to simulate small amplitude wave propagations, and then numerical results are compared with analytical solutions. Finally, a 2D example of fluid-structure interaction under wave dynamic forces provides convincing evidences for the method excellent solution quality and fidelity.

Reduced projection augmented Lagrange bi-conjugate gradient method for contact and impact problems

Based on the numerical governing formulation and non-linear complementary conditions of contact and impact problems, a reduced projection augmented Lagrange bi- conjugate gradient method is proposed for contact and impact problems by translating non-linear complementary conditions into equivalent formulation of non-linear program- ming. For contact-impact problems, a larger time-step can be adopted arriving at numer- ical convergence compared with penalty method. By establishment of the impact-contact formulations which are equivalent with original non-linear complementary conditions, a reduced projection augmented Lagrange bi-conjugate gradient method is deduced to im- prove precision and efficiency of numerical solutions. A numerical example shows that the algorithm we suggested is valid and exact.