Characteristics and triggering mechanism of Xinmo landslide on 24 June 2017 in Sichuan, China

At 5: 39 AM on 24 June 2017, a huge landslide-debris avalanche occurred on Fugui Mountain at Xinmo village, Diexi town, Maoxian county, Sichuan province, China. The debris blocked the Songpinggou River for about 2 km, resulting in a heavy loss of both human lives and properties(10 deaths, 3 injuries, 73 missing, and 103 houses completely destroyed). The objectives of this paper are to understand the overall process and triggering factors of this landslide and to explore the affecting factors for its long term evolution before failure. Post event surveys were carried out the day after the landslide occurrence. Information was gathered from literature and on-site investigation and measurement. Topography, landforms, lithology, geological setting, earthquake history, meteorological and hydrological data of the area were analysed. Aerial photographs and other remote sensing information were used for evaluation and discussion. Eye witnesses also provided a lot of helpful information for us to understand the process of initiation, development and deposition. The depositional characteristics of the moving material as well as the traces of the movement,the structural features of the main scarp and the seismic waves induced by the slide are presented and discussed in detail in this paper. The results show that the mechanism of the landslide is a sudden rupture of the main block caused by the instability of a secondary block at a higher position. After the initiation, the failed rock mass at higher position overloaded the main block at the lower elevation and collapsed in tandem. Fragmentation of the rock mass occurred later, thus forming a debris avalanche with high mobility. This landslide case indicates that such seismic events could influence geological hazards for over 80 years and this study provides reference to the long term susceptibility and risk assessment of secondary geological hazards from earthquake.

Research on mechanism of mountain landslide due to underground mining

The basics of mining landslides were first summed up based on the analysis ofactual materials by the application of mining subsidence and landslide theories. Further,the mechanism of along-layer landslide by mining was studied with the example of theXiangshan mining landslide at Hancheng, Shaanxi Province. Meanwhile, the state ofstress, and the mechanism of deformation and destruction of the Xiangshan mining slopewere analyzed by the Finite Element Method.

Landslide disaster in the loess area of China

China is the country with most widely distributed loess area in the world, and its loess area accounts of 6.63% of total nation land area. The landslide disaster occurs frequently for complex natural condition and becomes major factors hindering the social and economic development of loess regions. Through different indexes, the authors divided the landslides into 9 principal types and analyzed the distribution characteristics of loess landslide in time and space, the affecting factors and mechanism of landslides. It is pointed out that time and spatial distributions of landslides are closely correlative to topographic and geomorphic conditions, earthquake and rainfall, and the key influencing factors include topography, geomorphology, new tectonic movements, earthquake activity, surface water, ground water and human activities. The authors emphasized that the natural condition of loess areas was favorable to landslides, human activities impelled its occurrence and that controlling the loess landslide was an urgent task for sustainable development in the loess zone.

Discrete Element Analysis of Huangtupo Landslide

On the basis of the deep geology and the geological structure of Huangtupo landslide, an ancient landslide in the reservoir of the Three Gorges, the geo-environmental model of the landslide is established to analyze quantitatively the sliding mechanism by using the discrete element method. It is concluded that interbedding structure of soft and hard formation consists of the main geological background, which induced the arching of the formation under gravity. Stability analysis of different loadings shows that the ground building weight on the middle slope may restrain the extension of shear sliding zone below , but may activate the foot area which will reduce the safety factor of the front.

Research on Comprehensive Reinforcement Treatment Technology of Tunnel Entrance Slope in Thick Landslide Stratum

The existence of loose landslides not only poses a huge safety hazard to the construction of tunnel entrances, but also significantly increases the difficulty of site construction. In this paper, we investigate the comprehensive slope reinforcement management technology for tunnel entrances in thick landslide strata, using the finite element analysis software ABAQUS to study the slope safety coefficients, displacements and plastic zone changes under different management conditions, propose a design structure for slope stability enhancement in thick landslide strata, and analyse the effect of the application of slope stability enhancement measures for thick landslide strata. The results show that the enhanced design structure is used to enhance slope stability. The results show that after the landslide treatment with the enhanced design structure, the slope safety factor was increased from 0.961 to 1.512, the maximum horizontal tangential displacement was reduced from 330.2 mm to 32.74 mm, and the area of plastic zone was significantly reduced, and the landslide support effect was remarkable.

Reservoir-induced landslides and risk control in Three Gorges Project on Yangtze River,China

The Three Gorges region in China was basically a geohazard-prone area prior to construction of the Three Gorges Reservoir （TGR）. After construction of the TGR, the water level was raised from 70 m to 175 m above sea level （ASL）, and annual reservoir regulation has caused a 30-m water level difference after impoundment of the TGR since September 2008. This paper first presents the spatiotemporal distribution of landslides in six periods of 175 m ASL trial impoundments from 2008 to 2014. The results show that the number of landslides sharply decreased from 273 at the initial stage to less than ten at the second stage of impoundment. Based on this, the reservoir-induced landslides in the TGR region can be roughly classified into five failure patterns, i.e. accumulation landslide, dip-slope landslide, reversed bedding landslide, rockfall, and karst breccia landslide. The accumulation landslides and dip-slope landslides account for more than 90%. Taking the Shuping accumulation landslide （a sliding mass volume of 20.7 × 106 m^3） in Zigui County and the Outang dip-slope landslide （a sliding mass volume of about 90 × 106 m^3） in Fengjie County as two typical cases, the mechanisms of reactivation of the two landslides are analyzed. The monitoring data and factor of safety （FOS） calculation show that the accumulation landslide is dominated by water level variation in the reservoir as most part of the mass body is under 175 m ASL, and the dip-slope landslide is controlled by the coupling effect of reservoir water level variation and precipitation as an extensive recharge area of rainfall from the rear and the front mass is below 175 m ASL. The characteristics of landslide-induced impulsive wave hazards after and before reservoir impoundment are studied, and the probability of occurrence of a landslide-induced impulsive wave hazard has increased in the reservoir region. Simulation results of the Ganjingzi landslide in Wushan County indicate the strong relationship between landslide-induced surge and water variation with high potential risk to shipping and residential areas. Regarding reservoir regulation in TGR when using a single index, i.e. 1-d water level variation, water resources are not well utilized, and there is also potential risk of disasters since 2008. In addition, various indices such as 1-d, 5-d, and 10-d water level variations are proposed for reservoir regulation. Finally, taking reservoir-induced landslides in June 2015 for example, the feasibility of the optimizing indices of water level variations is verified.

Study on high and steep slope stability of surface mine based on RFPA-SRM

The instability and failure mechanism of high and steep slopes in surface mines, and the basis for some reasonable landslide prevention measures were provided using the RFPA-SRM. Based on the actual progress of the Pingzhuang Western Surface Mine and based on strength reduction method, the dynamic instability processes of the top high and steep slope was simulated. Also, the landslide mode was determined, the characteristics of the displacement distribution, the deformation, failure, and the stress distribution in the slope were demonstrated, and the stability was calculated. Conclusions can be drawn as follows： the landslide or failure of high and steep slopes on a surface mine is a gradual process, in which the slope undergoes the generation, expansion, and connection of the fractures and the displacement increases until landslide occurs; a small portion of the upper rocks fail due to the tension and the lower rocks fail due to the shear; the potential sliding surface is combined and the essential cause of the landslide is the shear stress concentration.