In order to enhance the sintering resistance of lanthanum aluminate based high emissivity coatings,Ca^(2+)-Fe^(3+)doped LaAlO_(3)/ZrO_(2)specimens were prepared by solid state sintering using La_(2)O_(3),Al_(2)O_(3),C...In order to enhance the sintering resistance of lanthanum aluminate based high emissivity coatings,Ca^(2+)-Fe^(3+)doped LaAlO_(3)/ZrO_(2)specimens were prepared by solid state sintering using La_(2)O_(3),Al_(2)O_(3),CaCO_(3) and Fe_(2)O_(3) as raw materials,extra-adding fused Y_(2)O_(3)-stabilized ZrO_(2)(0,5%,10%,and 15%,by mass),ball milling,pre-calcining,pressing into shapes and sintering at 1600℃for 2 h.The effect of the ZrO_(2)addition on the properties of lanthanum aluminate based high emissivity coatings was explored.It is concluded that ZrO_(2)does not react with LaAlO_(3),which can inhibit the sintering of the specimens.With the increase of the ZrO_(2),addition,the linear shrinkage rate and the thermal conductivity decrease significantly,while the emissivity decreases,but the emissivity of all the specimens is all higher than 0.9.The optimal addition of ZrO_(2),is 10%.展开更多
Lanthanum oxalate hydrate La2（C2O4）3·10H2O,the precursor of La2O3 ultrafine powders,was prepared by impinging stream reactor method with PEG 20000 as surfactant.Thermal decomposition of La2（C2O4）3·10H2O ...Lanthanum oxalate hydrate La2（C2O4）3·10H2O,the precursor of La2O3 ultrafine powders,was prepared by impinging stream reactor method with PEG 20000 as surfactant.Thermal decomposition of La2（C2O4）3·10H2O from room temperature to 900 °C was investigated and intermediates and final solid products were characterized by FTIR and DSC-TG.Results show that the thermal decomposition process consists of five consecutive stage reactions.Flynn-Wall-Ozawa（FWO） and Kissinger-Akahira-Sunose（KAS） methods were implemented for the calculation of energy of activation（E）,and the results show that E depends on α,demonstrating that the decomposition reaction process of the lanthanum oxalate is of a complex kinetic mechanism.The most probable mechanistic function,G（α）=[1-（1＋α）1/3]2,and the kinetic parameters were obtained by multivariate non-linear regression analysis method.The average E-value that is compatible with the kinetic model is close to value which was obtained by FWO and KAS methods.The fitting curve matches the original TG curve very well.展开更多
Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were chara...Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).展开更多
基金Zhongyuan Science and Technology Innovation Leading Talents(224200510006)NSFC-Henan Joint Fund funded project(U1904217).
文摘In order to enhance the sintering resistance of lanthanum aluminate based high emissivity coatings,Ca^(2+)-Fe^(3+)doped LaAlO_(3)/ZrO_(2)specimens were prepared by solid state sintering using La_(2)O_(3),Al_(2)O_(3),CaCO_(3) and Fe_(2)O_(3) as raw materials,extra-adding fused Y_(2)O_(3)-stabilized ZrO_(2)(0,5%,10%,and 15%,by mass),ball milling,pre-calcining,pressing into shapes and sintering at 1600℃for 2 h.The effect of the ZrO_(2)addition on the properties of lanthanum aluminate based high emissivity coatings was explored.It is concluded that ZrO_(2)does not react with LaAlO_(3),which can inhibit the sintering of the specimens.With the increase of the ZrO_(2),addition,the linear shrinkage rate and the thermal conductivity decrease significantly,while the emissivity decreases,but the emissivity of all the specimens is all higher than 0.9.The optimal addition of ZrO_(2),is 10%.
基金Project (IRT0974) supported by Program for Changjiang Scholars and Innovative Research Team in University,ChinaProject (50974098) supported by the National Natural Science Foundation of China
文摘Lanthanum oxalate hydrate La2（C2O4）3·10H2O,the precursor of La2O3 ultrafine powders,was prepared by impinging stream reactor method with PEG 20000 as surfactant.Thermal decomposition of La2（C2O4）3·10H2O from room temperature to 900 °C was investigated and intermediates and final solid products were characterized by FTIR and DSC-TG.Results show that the thermal decomposition process consists of five consecutive stage reactions.Flynn-Wall-Ozawa（FWO） and Kissinger-Akahira-Sunose（KAS） methods were implemented for the calculation of energy of activation（E）,and the results show that E depends on α,demonstrating that the decomposition reaction process of the lanthanum oxalate is of a complex kinetic mechanism.The most probable mechanistic function,G（α）=[1-（1＋α）1/3]2,and the kinetic parameters were obtained by multivariate non-linear regression analysis method.The average E-value that is compatible with the kinetic model is close to value which was obtained by FWO and KAS methods.The fitting curve matches the original TG curve very well.
基金Project(50975282)supported by the National Natural Science Foundation of China
文摘Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).
