Preparation of large particle rare earth oxides by precipitation with oxalic acid

The large particle CeO2 and Y2O3 were prepared using oxalic acid as precipitator. The effects of operational parameters such as stirring velocity, precipitation temperature, feeding speed, aging time, precipitation method, and calcination temperature on particle size and loose density of CeO2 were studied. Under the particular conditions, particle median size of D50≥30μm, loose density of ≥2.0 g/mlof CeO2, and particle median size of D50≥20 μm of Y2O3 were prepared. This technology had advantages of simple process, less equipment investment, ease of use, and suitability for industrialization products.

Preparation of crystalline rare earth carbonates with large particle size from the lixivium of weathered crust elution-deposited rare earth ores

Crystalline rare-earth(RE)carbonates having large particle size were prepared from the lixivium of weathered crust elution-deposited rare-earth ores using the precipitation method with ammonium bicarbonate as the precipitant.Their chemical composition was studied using elemental and thermogravimetric analyses(TGA),and their structure and morphology were characterized using Fourier transform infrared(FTIR)spectroscopy,X-ray diffraction(XRD),and scanning electron microscopy(SEM).The results demonstrate that the crystalline rareearth carbonate is a hydrated basic carbonate or oxycarbonate and not astable intermediate carbonate in the process of thermal decomposition.The particle size of crystalline rare-earth carbonates with large particle size is in the range of 50–200μm.With an RE2O3 content of up to 95wt%,the quality of crystalline rare-earth carbonates is higher compared to the Chinese National Standard(GB/T 28882–2012).The quality of the product is superior to the Chinese National Standard.

Cerium dioxide with large particle size prepared by continuous precipitation

Cerium dioxide(CeO2) has attracted much attention and has wide applications such as automotive exhaust catalysts,polishing materials for optical glasses and additives for advanced glasses,as well as cosmetic materials.The particle size and its distribution are key factors to the performance of the materials in the functional applications.However,control of particle size is still a challenge in materials synthesis.Therefore,continuous precipitation of cerium oxalate(precursor of ceria) was carried out at dif...

FLOW BEHAVIOR AND MASS TRANSFER IN THREE-PHASE EXTERNAL-LOOP AIRLIFT REACTORS WITH LARGE PARTICLES

The flow behavior and mass transfer in a three-phase external-loop airlift reactor can be improved by adding large particles. The mass transfer and liquid dispersion behavior for a three-phase external-loop reactor with large particles are studied in terms of the effect of the diameter and loading of the large particles on the liquid dispersion coefficient and mass transfer coefficient, The results showed that increasing the diameter or loading of the large particles tend to decrease dispersion and intensify mass transfer, and that an increase in the diameter of the large particles remarkably decreases the particle loop rate, while the effect of fine particles is much less notable.

Study on the preparation process of large particle cerium oxide

The large particle cerium oxide was prepared using oxalic acid as precipitation agent. The effects of preparation conditions on the particle size of cerium oxide were discussed. The results showed that the particle size of cerium oxide could be controlled effectively by the temperature,acidity of the solution,aging time,etc. The optimized preparation process of large particle cerium oxide was obtained. The cerium oxide with size between 50 μm to 150 μm was prepared by the process. Moreover,the cerium oxide particles were dispersed uniformly.

Pyrolysis of single large biomass particle: Simulation and experiments

Pyrolysis and heat transfer characteristics of single large biomass particle were investigated using threedimensional unsteady heat transfer model coupled with chemical reactions.The consumption of biomass and the production of products were simulated.Some experiments were designed to provide model parameters for simulation calculations.The simulation was verified by pyrolysis experiments of large biomass particle in a vertical tube furnace.The simulation results show the internal heat and mass transfer law during the pyrolysis of large biomass particle.When the biomass particle diameter is between 10 and 30 mm,for every 5 mm increase in particle diameter,the time required for complete pyrolysis will increase on average by about 50 s.When the pyrolysis temperature is between 673 K and 873 K,a slight decrease in the pyrolysis temperature will cause the time required for the biomass to fully pyrolyze to rise significantly.And the phenomenon is more obvious in the low temperature range.The results indicate that the numerical simulation agrees well with the experimental results.

Discovery and intensity characterization of TDP and PRP based on temperature evolution history during the pyrolysis for large biomass particle

The pyrolysis behaviors and temperature evolution history of lignocellulosic biomass(Beech,BH)were characterized using a novel pyrolysis model-C-DAEM.The simulation results were validated through corresponding experimental data.Based on the simulation results,two distinct peaks were observed in the temperature difference between the surface and center(TDSC)curve,namely the thermal disturbance peak(TDP)and the pyrolysis reaction peak(PRP).The presence of TDP and PRP was confirmed by examining the heat flux ratio between the pyrolysis rate and the temperature rise rate.Moreover,the results indicated that three factors,namely heating temperature,particle size,and pyrolysis rate,influenced the relative intensity between TDP and PRP.By changing the values of each impact factor,conditions where TDP owns the same height with PRP were obtained under different working conditions.These findings have led to the development of a dimensionless number,naming the pyrolysis-heating surface-center number(PHSC number).This number could provide a comprehensive indication of the collective impact of the aforementioned factors when TDP and PRP exhibit equal peak heights.

Friction factor correlation for airflow through broken rocks and its applications in mine ventilation

The Atkinson equation along with its friction factor is commonly used to estimate pressure requirement in mine ventilation.However,friction factor correlation of flow through broken rock,typically found in blasted stope,gob,rock pit or block caving rock deposits,etc.,is currently unavailable.Also,it is impractical to conduct direct measurements of flow resistance in an inaccessible broken rock zone.This paper aims to develop a new friction factor correlation of flow through broken rock that can be used directly in Atkinson equation.The proposed correlation is valid for broken rocks with diameter between 0.04 and 1.2 m and porosity ranging from 0.23 to 0.7.

FULLY RESOLVED NUMERICAL SIMULATION OF TURBULENT PIPE FLOWS LADEN WITH LARGE NEUTRALLY-BUOYANT PARTICLES

In this article,we employ a fully-resolved numerical simulation method（the fictitious domain method）to investigate the effects of large neutrally-buoyant particles on the turbulent flow in a pipe at low Reynolds number and non-dilute regimes.The tube Reynolds number is fixed to be 4 900,the particle-pipe diameter ratio is 0.1,and the particle volume fraction ranges from 0.33%to 10%.Our results indicate that the presence of large particles decreases the maximum root-of-mean-square（rms）of the streamwise velocity fluctuation near the wall by weakening the intensity of large-scale streamwise vortices,although in the region very close to the wall the particles increase the rms of streamwise velocity fluctuation.On the other hand,the particles induce small-scale vortices in the near-wall region,resulting in the enhancement of the rms of radial and circumferential velocity fluctuations there.

Modeling of particle transport and combustion phenomena in a large-scale circulating fluidized bed boiler using a hybrid Euler-Lagrange approach

The constantly developing fiuidized combustion technology has become competitive with a conventional pulverized coal （PC） combustion. Circulating fluidized bed （CFB） boilers can be a good alternative to PC boilers due to their robustness and lower sensitivity to the fuel quality. However, appropriate engineering tools that can be used to model and optimize the construction and operating parameters of a CFB boiler still require development. This paper presents the application of a relatively novel hybrid Euler-Lagrange approach to model the dense gas-solid flow combined with a combustion process in a large-scale indus- trial CFB boiler. In this work, this complex flow has been resolved by applying the ANSYS FLUENT 14.0 commercial computational fluid dynamics （CFD） code. To accurately resolve the multiphase flow, the original CFD code has been extended by additional user-defined functions. These functions were used to control the boiler mass load, particle recirculation process （simplified boiler geometry）, and interphase hydrodynamic properties. This work was split into two parts. In the first part, which is referred to as pseudo combustion, the combustion process was not directly simulated. Instead, the effect of the chemi- cal reactions was simulated by modifying the density of the continuous phase so that it corresponded to the mean temperature and composition of the flue gases, In this stage, the particle transport was simu- lated using the standard Euler-Euler and novel hybrid Euler-Lagrange approaches, The obtained results were compared against measured data, and both models were compared to each other. In the second part, the numerical model was enhanced by including the chemistry and physics of combustion. To the best of the authors＇ knowledge, the use of the hybrid Euler-Lagrange approach to model combustion is a new engineering application of this model, In this work, the combustion process was modeled for air-fuel combustion. The simulation results were compared with experimental data. The performed numerical simulations showed the applicability of the hybrid dense discrete phase model approach to model the combustion process in large-scale industrial CFB boilers.

Simulation study on interaction coefficient of DEM in non-spherical large size (5-30 mm) coal particles

The pneumatic conveying system of coal particles can greatly reduce the dust and improve the environmental quality at underground mining workface and the surrounding of coal enterprises.The particle shape and the interaction coefficients between particles and the contact surface play important roles in the pneumatic conveying and CFD-DEM simulation.In order to build the semblable shape models and obtain the accurate interaction coefficients of large coal particles,this article establishes the con tact model by the particle overlap method and describes the mathematical model of the shape characteristics for large coal particle.The particle models are simulated by adopting the multi-index mixed orthogonal experiments.The accumulation density,the porosity and the error between simulation and experiment are taken as the indexes,and the particle models and the particle contact coefficients are taken as the orthogonal test factors.As a result,three more accurate particle models and their interaction coefficients are obtained,which provide the model basis for the pneumatic conveying of large coal particles.

Estimation of the turbulent viscous shear stress in a centrifugal rotary blood pump by the large eddy particle image velocimetry method

The non-physiologic turbulent flows in centrifugal rotary blood pumps (RBPs) may result in complications such as the hemolysis and the platelet activation. Recent researches suggest that the turbulent viscous dissipation in the smallest eddies is the main factor of the blood trauma caused by the turbulent flow. The turbulent viscous shear stress (TVSS) was taken as the realistic physical force acting on the cells. However, limited by the temporal and spatial resolutions of the instrumentation currently available, very limited studies are available for the TVSS in the RBPs. In this paper, the large eddy particle image velocimetry (PIV) method is used to estimate the turbulent dissipation rate in the sub-grid scale, to investigate the effect of the TVSS on the blood trauma. Detailed flow characteristics, such as the relative velocity vectors, the estimated TVSS levels and the Kolmogorov length scales, are analyzed in three impeller phases at three constant flow rates (3 L/min, 5 L/min and 7 L/min). Over the measures range in this study, the maximum TVSS in the investigated RBP is lower than the reported critical value of stress. This study demonstrates that the large eddy PIV method is effective to evaluate the flow-dependent force on the cells. On the other hand, it is found that the TVSS is highly dependent on the flow behavior. Under severe off-design conditions, the complex flow characteristics, such as the flow separation and the vortical structures, will increase the TVSS. Thus, in order to reduce the hemolysis in the RBPs, the flow disturbance, induced by the departure of the incidence angle, should be avoided during the design of the RBPs.

A LN2-based cooling system for a next-generation liquid xenon dark matter detector

In recent years, cooling technology for liquid xenon(LXe) detectors has advanced driven by the development of dark matter(DM) detectors with target mass in the 100–1000 kg range. The next generation of DM detectors based on LXe will be in the 50,000 kg(50 t)range requiring more than 1 k W of cooling power. Most of the prior cooling methods become impractical at this level.For cooling a 50 t scale LXe detector, a method is proposed in which liquid nitrogen(LN2) in a small local reservoir cools the xenon gas via a cold finger. The cold finger incorporates a heating unit to provide temperature regulation. The proposed cooling method is simple, reliable, and suitable for the required long-term operation for a rare event search. The device can be easily integrated into present cooling systems, for example the ‘‘Cooling Bus’ ’employed for the Panda X I and II experiments. It is still possible to cool indirectly with no part of the cooling or temperature control system getting in direct contact with the clean xenon in the detector. Also, the cooling device can be mounted at a large distance, i.e., the detector is cooled remotely from a distance of 5–10 m. The method was tested in a laboratory setup at Columbia University to carry out different measurements with a small LXe detector and behaved exactly as predicted.