Ultraprecision intersatellite laser interferometry

Precision measurement tools are compulsory to reduce measurement errors or machining errors in the processes of calibration and manufacturing.The laser interferometer is one of the most important measurement tools invented in the 20th century.Today,it is commonly used in ultraprecision machining and manufacturing,ultraprecision positioning control,and many noncontact optical sensing technologies.So far,the state-of-the-art laser interferometers are the ground-based gravitational-wave detectors,e.g.the Laser Interferometer Gravitational-wave Observatory(LIGO).The LIGO has reached the measurement quantum limit,and some quantum technologies with squeezed light are currently being tested in order to further decompress the noise level.In this paper,we focus on the laser interferometry developed for space-based gravitational-wave detection.The basic working principle and the current status of the key technologies of intersatellite laser interferometry are introduced and discussed in detail.The launch and operation of these large-scale,gravitational-wave detectors based on space-based laser interferometry is proposed for the 2030s.

Research on Telescope TTL Coupling Noise in Intersatellite Laser Interferometry

The detection mission of gravitational waves in space is that the accuracy of the long-baseline intersatellite laser interferometry on the million-kilometer order needs to reach the order of 8 pm/Hz.Among all noise sources that affect the interferometry accuracy,tilt-to-length(TTL)coupling noise is the second largest source of noise after shot noise.This paper focuses on studying the contribution of TTL coupling noise of the telescope system in the intersatellite scientific interferometer.By referring to the laser interferometer space antenna(LISA)’s noise budget,TTL coupling noise is required to be within±25μm/rad(±300μrad).Therefore,this paper focuses on studying both the mechanism of TTL coupling noise due to the noise sources of the telescope and the method of suppressing the TTL noise,which can lay a foundation for noise distribution and the development of engineering prototypes in subsequent tasks.

The Approach of Compensation of Air Refractive Index in Thermal Expansion Coefficients Measurement Based on Laser Feedback Interferometry

We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.

Measurement of the surface morphology of plasma facing components on the EAST tokamak by a laser speckle interferometry approach

The laser speckle interferometry approach provides the possibility of an in situ optical noncontacted measurement for the surface morphology of plasma facing components（PFCs）, and the reconstruction image of the PFC surface morphology is computed by a numerical model based on a phase unwrapping algorithm. A remote speckle interferometry measurement at a distance of three meters for real divertor tiles retired from EAST was carried out in the laboratory to simulate a real detection condition on EAST. The preliminary surface morphology of the divertor tiles was well reproduced by the reconstructed geometric image. The feasibility and reliability of this approach for the real-time measurement of PFCs have been demonstrated.

Comparative research and its significance of deformation measurements by technologies of laser real-time holographic interferome-try and radar differential interferometry

The principles and applications of laser real-time holographic interferometry （LRTHI） and radar differential interferometry （RDI） technologies are described in this paper, respectively. By using LRTHI, we can observe the deformation of samples under pressure in the lab and study the anomaly characteristics relating to different strain fields in different fracture-developing areas; while by using RDI, we can observe the landform and surface deformation. The results of deformation observed before and after the Ms=7.9 Mani earthquake （Tibet） and Ms=6.2 Shangyi-Zhangbei earthquake in China are obtained. It is pointed out that LRTHI and RDi are similar, which study the characteristics of anomalous deformation field by fringe variations for both of them. Therefore, the observation of deformation field in the seismogenic process, especially in the period impending an earthquake by RDI, and the comparative study in the lab by LRTHI are of great significance.

Numerical simulations of the wavefront distortion of inter-spacecraft laser beams caused by solar wind and magnetospheric plasmas

Plasma turbulence may lead to additional wavefront distortion of inter-spacecraft laser beams during the operation of spaceborne gravitational wave(GW)observatories,e.g.Tian Qin.By making use of the Space Weather Modelling Framework(SWMF)model and realistic orbit data for the Tian Qin constellation,the characteristic parameters of the plasma turbulence present at the Tian Qin orbit are obtained.As a first step,this work is based on the assumptions that the cold plasma approximation is valid and that the effects of the electromagnetic field induced by charge separation within the Debye length on the laser's wavefront can be ignored.An atmospheric turbulence-laser interaction model is then applied to analyze the effects of the plasma turbulence on the inter-spacecraft laser's wavefront.The preliminary results show that the wavefront distortion caused by the plasma turbulence is 10^-9 rad,which is significantly less than the designated error budget,i.e.10^-6 rad,and thus will not affect the laser interferometry.

Three‑Dimensional Nano‑displacement Measurement by Four‑Beam Laser Interferometry

A 3D nano-displacement measurement method,where the difference in phase between the beams in a four-beam laser interference is changed,is proposed.Simulation results demonstrate that the variation of phase difference causes the deviation of the interference pattern in the laser interference system.Based on this theory,we design and build a four-beam laser interference system.The corner cube prism in the optical path is shifted,and the phase of the beam is changed by applying different voltages to a piezoelectric stage.The phase difference is obtained by analyzing the lattice pattern with subpixel precision,and then the displacement is determined by correlation operation.The experimental measurement results are consistent with the theoretical analysis,thereby verifying the feasibility of this measurement method.

A LASER INTERFEROMETRIC MEASUREMENT OF THE TEMPERATURE DISTRIBUTION IN CONVECTIVE THERMAL TRANSFER BOUNDARY LAYERS

By means of a double mirror interferometry a two-dimensional temperature distribution measurement in convective thermal boundary layers is presented. When the cold air flows along a hot plate model, the interferometric fringe inside the boundary layer will bend. According to the displacement of the fringe and the relation between temperature and index of refraction, a two-dimensional temperature profile is obtained. All is accomplished by optical device with the help of micro-computer without any contact with the flow field.

Study on the Two-Dimensional Density Distribution for Gas Plasmas Driven by Laser Pulse

We perform an experimental study of two-dimensional（2D） electron density profiles of the laser-induced plasma plumes in air by ordinarily laboratorial interferometry. The electron density distributions measured show a feature of hollow core. To illustrate the feature, we present a theoretical investigation by using dynamics analysis. In the simulation, the propagation of laser pulse with the evolution of electron density is utilized to evaluate ionization of air target for the plasma-formation stage. In the plasma-expansion stage, a simple adiabatic fluid dynamics is used to calculate the evolution of plasma outward expansion. The simulations show good agreements with experimental results, and demonstrate an effective way of determining 2D density profiles of the laser-induced plasma plume in gas.

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the parameters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0%to 15%,every 5%increase of aluminum resulted in about a 1.3%decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14%and 8%higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 ms throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12%and 2.9 ms higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80%of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.

UNSTEADY INTERACTION OF SHOCK WAVE DIFFRACTING AROUND A CIRCULAR CYLINDER IN AIR

The reflection and diffraction of a planar shock wave around a circular cylinder are a typical problem of the complex nonlinear shock wave phenomena in literature.It has long been studied experimentally,analytically as well as numerically.Takayama in 1987 obtained clear experimental pictures ofisopycnics in shock tube under the condi- tion that the impinging shock wave propagates as far as 3 diameters away from the cylinder.To know more complete- ly the whole unsteady process,it is desirable to get experimental results in a region which is more than 10 diameters away from the cylinder.This is what has been done in this paper by using the pulsed laser holographic interferometry for several shock Mach numbers of the impinging shock. Results for several moments are shown,giving more know- ledge about the whole unsteady flow field.This is useful for a reliable and complete understanding of the changing force acting on the cylinder,and provides interesting data to check the performance of many recently developed high resolution numerical methods for unsteady shock wave calculation.

Real-time human blood pressure measurement based on laser self-mixing interferometry with extreme learning machine

In this paper, we present a method based on self-mixing interferometry combing extreme learning machine for real-time human blood pressure measurement. A signal processing method based on wavelet transform is applied to extract reversion point in the self-mixing interference signal, thus the pulse wave profile is successfully reconstructed. Considering the blood pressure values are intrinsically related to characteristic parameters of the pulse wave, 80 samples from the MIMIC-II database are used to train the extreme learning machine blood pressure model. In the experiment, 15 measured samples of pulse wave signal are used as the prediction sets. The results show that the errors of systolic and diastolic blood pressure are both within 5 mm Hg compared with that by the Coriolis method.

Amplitude measurement of weak sinusoidal water surface acoustic wave using laser interferometer

To determine the amplitude of weak sinusoidal water surface acoustic wave （WSAW）, a method based on the spectrum analysis of the phase-modulated interference signal is developed. Calculated from the amplitude spec- trum of the detection signal, a characteristic ratio indicates that the phase-modulation depth of a WSAW is suggested by determining the amplitude of a WSAW according to their functional relationship. Experimental investigations for a 4 kHz WSAW evaluate the measurement＇s precision with an amplitude measurement stan- dard deviation of 0.12 nm. The measurement accuracy also is demonstrated by the experimental investigations. The theory of this method is briefly described, and the experimental setup is presented.

Non-contact optical dynamic measurements at different ranges:a review

Optical dynamic measurements are widely used for non-contact vibration,continuous deformation,or moving objects.Various measurement techniques were developed for different deformation amplitudes.This paper reviews three types of technique for different measurement ranges:interferometric techniques for deformation or vibration(nanometer to submillimeter amplitude)whose measurement accuracies rely on phase extraction of interferometric signal;imaging based techniques for deformation or vibration(micrometer to centimeter amplitude)with the aid of moire,structured light,and man-made speckles,whose sensitivities is from 1/100 to 1/10 pixel;and videometrics for large deformation or movement detection(greater than centimeter amplitude).Many research groups have improved measurement capabilities for these three techniques to meet particular industrial application requirements.