Although the shell mould casting process has a wide range of application in many fields,the prediction of casting defects is still a problem.In the present work,a typical leaf spring bracket casting of ZG310-570 was f...Although the shell mould casting process has a wide range of application in many fields,the prediction of casting defects is still a problem.In the present work,a typical leaf spring bracket casting of ZG310-570 was fabricated by shell mold casting.The finite element model and ProCAST software were utilized for simulating the filling and solidification processes of the casting;and the formation mechanism of the gas pore,and shrinkage porosity defects were analyzed.The results indicate that the gas pore and shrinkage porosity defects are formed due to air entrapment,insufficient feeding and non-sequential solidification.Subsequently,through changing the position of risers,adding a connecting channel between the risers,and setting blind risers at the U-shaped brackets,an optimized gating and feeding system was established to improve the quality of the casting.After optimization,the gas pore and shrinkage porosity defects of the leaf spring bracket casting are effectively eliminated.The experiment results with the optimized casting process are in good agreement with the numerical simulation,which verifies the validity of the finite element model in the shell mould casting.展开更多
[目的]探讨42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的田间防治效果。[方法]以10%苯醚甲环唑水分散粒剂和70%甲基硫菌灵可湿性粉剂为对照药剂,采用小区试验研究42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的防治效果。[结果]42.4%唑醚...[目的]探讨42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的田间防治效果。[方法]以10%苯醚甲环唑水分散粒剂和70%甲基硫菌灵可湿性粉剂为对照药剂,采用小区试验研究42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的防治效果。[结果]42.4%唑醚·氟酰胺悬浮剂在剂量为150.0~225.0 g a.i./hm2时,对番茄叶霉病的防治效果为83.37%~91.63%,与10%苯醚甲环唑水分散粒剂120.0g a.i./hm^2对番茄叶霉病的防治效果无显著差异,但显著高于70%甲基硫菌灵可湿性粉剂562.5 g a.i./hm^2的防治效果。[结论]42.4%唑醚·氟酰胺悬浮剂可广泛用于番茄叶霉病的防治。展开更多
基金financially supported by the Major Science and Technology Projects in Anhui Province (No. 18030901097)the Natural Science Foundation of Anhui Province (No.1908085QE197)the Fundamental Research Funds for the Central Universities (JZ2018HGBZ0133, JZ2019HGTA0043)
文摘Although the shell mould casting process has a wide range of application in many fields,the prediction of casting defects is still a problem.In the present work,a typical leaf spring bracket casting of ZG310-570 was fabricated by shell mold casting.The finite element model and ProCAST software were utilized for simulating the filling and solidification processes of the casting;and the formation mechanism of the gas pore,and shrinkage porosity defects were analyzed.The results indicate that the gas pore and shrinkage porosity defects are formed due to air entrapment,insufficient feeding and non-sequential solidification.Subsequently,through changing the position of risers,adding a connecting channel between the risers,and setting blind risers at the U-shaped brackets,an optimized gating and feeding system was established to improve the quality of the casting.After optimization,the gas pore and shrinkage porosity defects of the leaf spring bracket casting are effectively eliminated.The experiment results with the optimized casting process are in good agreement with the numerical simulation,which verifies the validity of the finite element model in the shell mould casting.
文摘[目的]探讨42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的田间防治效果。[方法]以10%苯醚甲环唑水分散粒剂和70%甲基硫菌灵可湿性粉剂为对照药剂,采用小区试验研究42.4%唑醚·氟酰胺悬浮剂对番茄叶霉病的防治效果。[结果]42.4%唑醚·氟酰胺悬浮剂在剂量为150.0~225.0 g a.i./hm2时,对番茄叶霉病的防治效果为83.37%~91.63%,与10%苯醚甲环唑水分散粒剂120.0g a.i./hm^2对番茄叶霉病的防治效果无显著差异,但显著高于70%甲基硫菌灵可湿性粉剂562.5 g a.i./hm^2的防治效果。[结论]42.4%唑醚·氟酰胺悬浮剂可广泛用于番茄叶霉病的防治。
