Li x Mn 2O 4 spinels were prepared by in situ redox precipitation hydrothermal synthesis method, and characterized by XRD, BET, TGA, TEM and SEM etc. , and the effects of many factors on the properties of as prepared ...Li x Mn 2O 4 spinels were prepared by in situ redox precipitation hydrothermal synthesis method, and characterized by XRD, BET, TGA, TEM and SEM etc. , and the effects of many factors on the properties of as prepared Li x Mn 2O 4 samples were investigated. The results demonstrated that Li x Mn 2O 4 spinels can be synthesized under milder conditions by in situ redox precipitation hydrothermal synthesis method. Li x Mn 2O 4 spinels are cubic and symmetrical, and have a better stability at less than 700 ℃, their surface areas and particle sizes were strongly affected by crystallization temperature and time, pH value, calcination temperature and time. The optimal conditions of Li x Mn 2O 4 synthesis were determined as follows: the alkalinity(pH value) was 9; the crystallization temperature and time were more than 240 ℃ and 48 h, respectively; the calcination temperature and time were between 700-750 ℃ and 6-12 h, respectively; the molar ratio of Li to Mn was less than 1.2/2.展开更多
The cathode material Li 1+ x Mn 2O 4 was prepared by a modified citric acid complexation method. The influences of temperature, sintering time and n (Li)/ n (Mn) ratio on the structure of the products have been explor...The cathode material Li 1+ x Mn 2O 4 was prepared by a modified citric acid complexation method. The influences of temperature, sintering time and n (Li)/ n (Mn) ratio on the structure of the products have been explored, characterized and tested by XRD, TEM, BET measurements. The sample sintered at 750 ℃ for 12 h had greater charge/discharge capacity, better cyclic stability under electric current charge/discharge cycle. The initial capacity reached 120 mA·h/g with the charge/discharge efficieney of 98% and maintained 115 mA·h/g after 50 cycles.展开更多
文摘Li x Mn 2O 4 spinels were prepared by in situ redox precipitation hydrothermal synthesis method, and characterized by XRD, BET, TGA, TEM and SEM etc. , and the effects of many factors on the properties of as prepared Li x Mn 2O 4 samples were investigated. The results demonstrated that Li x Mn 2O 4 spinels can be synthesized under milder conditions by in situ redox precipitation hydrothermal synthesis method. Li x Mn 2O 4 spinels are cubic and symmetrical, and have a better stability at less than 700 ℃, their surface areas and particle sizes were strongly affected by crystallization temperature and time, pH value, calcination temperature and time. The optimal conditions of Li x Mn 2O 4 synthesis were determined as follows: the alkalinity(pH value) was 9; the crystallization temperature and time were more than 240 ℃ and 48 h, respectively; the calcination temperature and time were between 700-750 ℃ and 6-12 h, respectively; the molar ratio of Li to Mn was less than 1.2/2.
文摘The cathode material Li 1+ x Mn 2O 4 was prepared by a modified citric acid complexation method. The influences of temperature, sintering time and n (Li)/ n (Mn) ratio on the structure of the products have been explored, characterized and tested by XRD, TEM, BET measurements. The sample sintered at 750 ℃ for 12 h had greater charge/discharge capacity, better cyclic stability under electric current charge/discharge cycle. The initial capacity reached 120 mA·h/g with the charge/discharge efficieney of 98% and maintained 115 mA·h/g after 50 cycles.
