Results of an experimental and modelling study of forming processes in the AA2099 Al–Cu–Li alloy, for a wide range of temperatures, strains and strain rates, are presented. The analyses are based on tensile testing ...Results of an experimental and modelling study of forming processes in the AA2099 Al–Cu–Li alloy, for a wide range of temperatures, strains and strain rates, are presented. The analyses are based on tensile testing at 20 °C at a strain rate of 0.02 s-1and uniaxial compression testing in the temperature range 400–550 °C at strain rates ranging from0.001 to 100 s-1, for constant values of true strain of 0.5 and 0.9. The stability of plastic deformation and its relationship with a sensitivity of stress to strain rate are considered. The power dissipation efficiency coefficient, g（%）, and the flow instability parameter, n B 0, were determined. The complex processing maps for hot working were determined and quantified, including process frames for basic forging processes： conventional forging and for near-superplastic and isothermal conditions. A significant aspect is the convergence of power dissipation when passing through the 500 °C peak.Deformation, temperature and strain-rate-dependent microstructures at 500 °C for strain rates of 0.1, 1, 10 and 100 s-1are described and analysed for the conventional die forging process frame, corresponding to 465–523 °C and strain rates of50–100 s-1.展开更多
基金financed by the Ministry of Science and Higher Education (AGH-UST statutory research project No. 11.11.110.292)
文摘Results of an experimental and modelling study of forming processes in the AA2099 Al–Cu–Li alloy, for a wide range of temperatures, strains and strain rates, are presented. The analyses are based on tensile testing at 20 °C at a strain rate of 0.02 s-1and uniaxial compression testing in the temperature range 400–550 °C at strain rates ranging from0.001 to 100 s-1, for constant values of true strain of 0.5 and 0.9. The stability of plastic deformation and its relationship with a sensitivity of stress to strain rate are considered. The power dissipation efficiency coefficient, g（%）, and the flow instability parameter, n B 0, were determined. The complex processing maps for hot working were determined and quantified, including process frames for basic forging processes： conventional forging and for near-superplastic and isothermal conditions. A significant aspect is the convergence of power dissipation when passing through the 500 °C peak.Deformation, temperature and strain-rate-dependent microstructures at 500 °C for strain rates of 0.1, 1, 10 and 100 s-1are described and analysed for the conventional die forging process frame, corresponding to 465–523 °C and strain rates of50–100 s-1.
