Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the opti...Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.展开更多
Li[Li1/3Ti5/3O4] spinel-framework structure material is a kind of great interest for negative electrodes in energy storage cell. The synthesis of nanocrystalline Li[Li1/3Ti5/3O4] by sol-gel method using inorganic comp...Li[Li1/3Ti5/3O4] spinel-framework structure material is a kind of great interest for negative electrodes in energy storage cell. The synthesis of nanocrystalline Li[Li1/3Ti5/3O4] by sol-gel method using inorganic compounds and citric acid is developed, and single phase powder is obtained above 700 ℃. The electrochemical performances (of Li[Li1/3Ti5/3O4]) cathodes in lithium cell are studied. Special capacities are 131 mA·h·g-1 at 0.5C rate and 154 mA·h·g-1 at 0.1C in cycle test. No passivation layer is formed on Li[Li1/3Ti5/3O4] anode in lithium ion battery, and it is much safer than lithium metal and carbonaceous anodes. Faradic impedance in the charged cell is remarkably higher than that in discharged state, which is caused by distinct conductivities of Li[Li1/3Ti5/3O4] and (Li2[Li1/3Ti5/3O4].)展开更多
Spherical Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 was prepared via the homogenous precursors produced by solution spray-drying method. The precursors were sintered at different temperatures between 600 and 1 000 ℃ for 10 h. ...Spherical Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 was prepared via the homogenous precursors produced by solution spray-drying method. The precursors were sintered at different temperatures between 600 and 1 000 ℃ for 10 h. The impacts of different sintering temperatures on the structure and electrochemical performances of Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 were compared by means of X-ray diffractometry(XRD), scanning electron microscopy(SEM), and charge/discharge test as cathode materials for lithium ion batteries. The experimental results show that the spherical morphology of the spray-dried powers maintains during the subsequent heat treatment and the specific capacity increases with rising sintering temperature. When the sintering temperature rises up to 900 ℃ , Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 attains a reversible capacity of 153 mA·h/g between 3.00 and 4.35 V at 0.2C rate with excellent cyclability.展开更多
基金Funded by the National Natural Science Foundation of China(No.51004074)
文摘Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.
文摘Li[Li1/3Ti5/3O4] spinel-framework structure material is a kind of great interest for negative electrodes in energy storage cell. The synthesis of nanocrystalline Li[Li1/3Ti5/3O4] by sol-gel method using inorganic compounds and citric acid is developed, and single phase powder is obtained above 700 ℃. The electrochemical performances (of Li[Li1/3Ti5/3O4]) cathodes in lithium cell are studied. Special capacities are 131 mA·h·g-1 at 0.5C rate and 154 mA·h·g-1 at 0.1C in cycle test. No passivation layer is formed on Li[Li1/3Ti5/3O4] anode in lithium ion battery, and it is much safer than lithium metal and carbonaceous anodes. Faradic impedance in the charged cell is remarkably higher than that in discharged state, which is caused by distinct conductivities of Li[Li1/3Ti5/3O4] and (Li2[Li1/3Ti5/3O4].)
文摘Spherical Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 was prepared via the homogenous precursors produced by solution spray-drying method. The precursors were sintered at different temperatures between 600 and 1 000 ℃ for 10 h. The impacts of different sintering temperatures on the structure and electrochemical performances of Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 were compared by means of X-ray diffractometry(XRD), scanning electron microscopy(SEM), and charge/discharge test as cathode materials for lithium ion batteries. The experimental results show that the spherical morphology of the spray-dried powers maintains during the subsequent heat treatment and the specific capacity increases with rising sintering temperature. When the sintering temperature rises up to 900 ℃ , Li(Ni_(1/3)Mn_(1/3)Co_(1/3))O_2 attains a reversible capacity of 153 mA·h/g between 3.00 and 4.35 V at 0.2C rate with excellent cyclability.
