As a promising material in the aircraft industry,2A97 Al-Cu-Li alloy exhibits high corrosion susceptibility that may limit its application.In the present work,to illustrate the influences of precipitate and grain-stor...As a promising material in the aircraft industry,2A97 Al-Cu-Li alloy exhibits high corrosion susceptibility that may limit its application.In the present work,to illustrate the influences of precipitate and grain-stored energy on localized corrosion evolution in 2A97 Al-Cu-Li alloy,cold working and artificial aging were carried out to produce 2A97 Al-Cu-Li alloys under different thermomechanical conditions.Quasi-in-situ analysis,traditional immersion test and electrochemical measurement were then conducted to examine the corrosion behavior of 2A97 alloys.It is revealed that precipitate significantly affects Cu enrichment at corrosion fronts,which determines corrosion susceptibility of alloys,whereas grain-stored energy distribution is closely associated with localized corrosion propagation.It is also indicated that quasi-in-situ analysis exhibits a consistent corrosion evolution with traditional immersion tests,which is regarded as a proper method to explore localized corrosion mechanisms by providing local microstructural information with enhanced time and spatial resolutions.展开更多
The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formabilit...The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formability of Al-Cu-Li alloy is vital.A thorough comparison of the effects of cryo-deformation and ambient temperature large pre-deformation(LPD)on the creep ageing response in the 2195 alloy sheet at 160℃with different stresses has been made.The evolution of dislocations and precipitates during creep ageing of LPD alloys are revealed by X-ray diffraction and transmission electron microscopy.High-quality 2195 alloy sheet largely pre-deformed by 80%without edge-cracking is obtained by cryo-rolling at liquid nitrogen temperature,while severe edge-cracking occurs during room temperature rolling.The creep formability and strength of the 2195 alloy are both enhanced by introducing pre-existing dislocations with a density over 1.4×10^(15)m^(−2).At 160℃and 150 MPa,creep strain and creep-aged strength generally increases by 4−6 times and 30−50 MPa in the LPD sample,respectively,compared to conventional T3 alloy counterpart.The elongation of creep-aged LPD sample is low but remains relevant for application.The high-density dislocations,though existing in the form of dislocation tangles,promote the formation of refined T1 precipitates with a uniform dispersion.展开更多
To develop super-high strength Al-Li alloy,the microstructures and mechanical properties of Mg,Ag and Zn microalloyed Al-（3.2-3.8）Cu-（1.0-1.4）Li alloys（mass fraction） with T8 temper were studied.The results show...To develop super-high strength Al-Li alloy,the microstructures and mechanical properties of Mg,Ag and Zn microalloyed Al-（3.2-3.8）Cu-（1.0-1.4）Li alloys（mass fraction） with T8 temper were studied.The results showed that 1%of lower Li content restricted the strengthening effect of increasing Cu content,while simultaneous increase in Cu and Li contents contributed effectively to the enhancement of strength.The alloys were mainly strengthened by plenty of fine and well dispersed TI（Al2CuLi）precipitates.There were also some minor precipitates of θ＇（Al2Cu） and δ＇（Al3Li）,which became less in number density,even disappeared during the aging process.Meanwhile,higher Li content favored the formation θ＇ and δ＇ and a small amount of S＂（Al2CuMg） phases.In addition,strengthening effect and microstructure variation were analyzed through total non-solution mole fraction of Cu and Li and their mole ratio.To obtain Al-Li alloy with super-high strength,the total mole fractions of Cu and Li should be increased,and their mole ratios should also be kept at a certain high level.展开更多
基金support from the National Science Foundation of China (No.51971249)the Natural Science Foundation of Shandong Province,China (No.ZR2020KE012)the Science and Technology Planning Project of Longkou City,China (No.2021KJJH025).
基金the project of the Czech Science Foundation (No.20-19170S)the German Research Foundation (Deutsche Forschungsgemeinschaft (DFG))for financial support within the scope of project (No.SCHA 1484/46-1).
基金supports from the National Natural Science Foundation of China(Nos.52371065,52001128)the Hubei Provincial Natural Science Foundation of China(No.2023AFB637)。
文摘As a promising material in the aircraft industry,2A97 Al-Cu-Li alloy exhibits high corrosion susceptibility that may limit its application.In the present work,to illustrate the influences of precipitate and grain-stored energy on localized corrosion evolution in 2A97 Al-Cu-Li alloy,cold working and artificial aging were carried out to produce 2A97 Al-Cu-Li alloys under different thermomechanical conditions.Quasi-in-situ analysis,traditional immersion test and electrochemical measurement were then conducted to examine the corrosion behavior of 2A97 alloys.It is revealed that precipitate significantly affects Cu enrichment at corrosion fronts,which determines corrosion susceptibility of alloys,whereas grain-stored energy distribution is closely associated with localized corrosion propagation.It is also indicated that quasi-in-situ analysis exhibits a consistent corrosion evolution with traditional immersion tests,which is regarded as a proper method to explore localized corrosion mechanisms by providing local microstructural information with enhanced time and spatial resolutions.
基金Projects(52274404,52305441,U22A20190)supported by the National Natural Science Foundation of ChinaProjects(2022JJ20065,2023JJ40739)supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2022RC1001)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2023ZZTS0972)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2021YFB3400903)supported by the National Key R&D Program of China。
文摘The creep strain of conventionally treated 2195 alloy is very low,increasing the difficulty of manufacturing Al-Cu-Li alloy sheet parts by creep age forming.Therefore,finding a solution to improve the creep formability of Al-Cu-Li alloy is vital.A thorough comparison of the effects of cryo-deformation and ambient temperature large pre-deformation(LPD)on the creep ageing response in the 2195 alloy sheet at 160℃with different stresses has been made.The evolution of dislocations and precipitates during creep ageing of LPD alloys are revealed by X-ray diffraction and transmission electron microscopy.High-quality 2195 alloy sheet largely pre-deformed by 80%without edge-cracking is obtained by cryo-rolling at liquid nitrogen temperature,while severe edge-cracking occurs during room temperature rolling.The creep formability and strength of the 2195 alloy are both enhanced by introducing pre-existing dislocations with a density over 1.4×10^(15)m^(−2).At 160℃and 150 MPa,creep strain and creep-aged strength generally increases by 4−6 times and 30−50 MPa in the LPD sample,respectively,compared to conventional T3 alloy counterpart.The elongation of creep-aged LPD sample is low but remains relevant for application.The high-density dislocations,though existing in the form of dislocation tangles,promote the formation of refined T1 precipitates with a uniform dispersion.
基金Projects(2019YFA0708802, 2020YFA0711104) supported by the National Key R&D Program of ChinaProject(U21B6004) supported by the National Natural Science Foundation of ChinaProject(2021GK1040) supported by Major Project of Scientific Innovation of Hunan Province,China。
基金Project(2013AA032401)supported by the National High-tech Research and Development Program of ChinaProject(2013JSJJ 001)supported by Teacher's Research Foundation of Central South University,China
文摘To develop super-high strength Al-Li alloy,the microstructures and mechanical properties of Mg,Ag and Zn microalloyed Al-（3.2-3.8）Cu-（1.0-1.4）Li alloys（mass fraction） with T8 temper were studied.The results showed that 1%of lower Li content restricted the strengthening effect of increasing Cu content,while simultaneous increase in Cu and Li contents contributed effectively to the enhancement of strength.The alloys were mainly strengthened by plenty of fine and well dispersed TI（Al2CuLi）precipitates.There were also some minor precipitates of θ＇（Al2Cu） and δ＇（Al3Li）,which became less in number density,even disappeared during the aging process.Meanwhile,higher Li content favored the formation θ＇ and δ＇ and a small amount of S＂（Al2CuMg） phases.In addition,strengthening effect and microstructure variation were analyzed through total non-solution mole fraction of Cu and Li and their mole ratio.To obtain Al-Li alloy with super-high strength,the total mole fractions of Cu and Li should be increased,and their mole ratios should also be kept at a certain high level.
