Data obtained from accelerated life testing （ALT） when there are two or more failure modes, which is commonly referred to as competing failure modes, are often incomplete. The incompleteness is mainly due to censori...Data obtained from accelerated life testing （ALT） when there are two or more failure modes, which is commonly referred to as competing failure modes, are often incomplete. The incompleteness is mainly due to censoring, as well as masking which might be the case that the failure time is observed, but its corresponding failure mode is not identified. Because the identification of the failure mode may be expensive, or very difficult to investigate due to lack of appropriate diagnostics. A method is proposed for analyzing incomplete data of constant stress ALT with competing failure modes. It is assumed that failure modes have s-independent latent lifetimes and the log lifetime of each failure mode can be written as a linear function of stress. The parameters of the model are estimated by using the expectation maximum （EM） algorithm with incomplete data. Simulation studies are performed to check＇model validity and investigate the properties of estimates. For further validation, the method is also illustrated by an example, which shows the process of analyze incomplete data from ALT of some insulation system. Because of considering the incompleteness of data in modeling and making use of the EM algorithm in estimating, the method becomes more flexible in ALT analysis.展开更多
Taking landscape design of Suburban Park in Yulin City for example, this paper applied the design thoughts of integrating multiple planning, defining concepts and objectives, specified the design strategies of restori...Taking landscape design of Suburban Park in Yulin City for example, this paper applied the design thoughts of integrating multiple planning, defining concepts and objectives, specified the design strategies of restoring ecology, improving life and promoting production, and disclosed the landscape design mode based on the integration of ecology, production and life in which ecological landscapes, productive landscapes and living landscapes promote and coexist harmoniously with each other.展开更多
With the great development of liver transplantation in China, long survival and quality of life after liver transplantation have been matters of growing interest. This study was designed to investigate the impact of p...With the great development of liver transplantation in China, long survival and quality of life after liver transplantation have been matters of growing interest. This study was designed to investigate the impact of personality and coping skills on the quality of life after liver transplantation. METHODS:Fifty-five outpatients who had been followed up after liver transplantation at our center were assessed by general quality of life inventory (GQOLI-74 ), a medical coping modes questionnaire (MCMQ), an eysenck personality questionnaire (EPQ), and a general condition questionnaire (GCQ). RESULTS: The score for material well-being was the lowest (63.22±12.67) and for psychological well-being the highest (73.43±12.60) in 4 dimensions of the GQOLI in post transplantation patients. Their main coping method was confrontation (21.40±3.70). The main characteristics of their personality were extraversation (E score 12.96±4.13) and neuroticism (N score 8.20±4.90) . The total score of the GQOLI was positively correlated with confrontation and E score, and it was negatively correlated with acceptance and N score. The physical well-being positively associated with the E score. The psychological well-being was positively correlated with confrontation and L score, and was negatively correlated with acceptance, P and N score. Social well-being was positively correlated with confrontation and E score, and was negatively correlated with acceptance and N score. Material well-being was not correlated with coping methods and personality. CONCLUSION:The quality of life in post liver transplantation patients is associated with their psychological characteristics.展开更多
Eight casing failure modes and 32 risk factors in oil and gas wells are given in this paper. According to the quantitative analysis of the influence degree and occurrence probability of risk factors, the Borda counts ...Eight casing failure modes and 32 risk factors in oil and gas wells are given in this paper. According to the quantitative analysis of the influence degree and occurrence probability of risk factors, the Borda counts for failure modes are obtained with the Borda method. The risk indexes of failure modes are derived from the Borda matrix. Based on the support vector machine （SVM）, a casing life prediction model is established. In the prediction model, eight risk indexes are defined as input vectors and casing life is defined as the output vector. The ideal model parameters are determined with the training set from 19 wells with casing failure. The casing life prediction software is developed with the SVM model as a predictor. The residual life of 60 wells with casing failure is predicted with the software, and then compared with the actual casing life. The comparison results show that the casing life prediction software with the SVM model has high accuracy.展开更多
Common beans are affected by many insect pests such as bean leaf beetle, aphids, legume pod borer and bean beetles. Traditional and cultural practices such as site selection, crop rotation, intercropping and seed sele...Common beans are affected by many insect pests such as bean leaf beetle, aphids, legume pod borer and bean beetles. Traditional and cultural practices such as site selection, crop rotation, intercropping and seed selection, sowing date are used to reduce the infestation of insect pests of common beans in the field and in storage rooms. Natural enemies such as predators, parasitoids and pathogens can control the insect pests. Synthetic pesticides such as cypermethion, carbaryl, and lambda-cyhalothrin have reported to be effective, but are toxic to people, destroy natural enemies and contaminate the environment. Botanical pesticides are the promising alternatives. This review paper explains toxicity, persistence and mode of actions of active ingredients of botanical pesticides. Rotenone from T. vogelii has the oral lethal dose (LD<sub>50</sub>) of 132 - 1500 mg/kg to mammals. It delays the electron transport chain in mitochondria of the insects and limits the cellular energy production. Azadirachtin is antifeedant and growth disruptor of insects. It has low toxicity to mammals. The oral LD<sub>50</sub> in mammals is greater than 3540 mg/kg. Azadirachtin displays strong effects on chemoreceptors of the insects. Pyrethrins are axonic poisons and have repellent effects to insects. It is less toxic to mammals with the LD<sub>50</sub> of about 1500 mg/Kg. It attacks the nervous systems of insects. Sesquiterpene lactones from T. diversifolia, Pentacyclic triterpenoids from Lantana camara, Vernodalin, Vernodalol and Epivernodalol from V. amygdalina have repellent and feeding deterrents chemicals which discourage the insects from feeding the crop. Most active ingredients of botanical pesticides have short life span in the environment.展开更多
Paris law can reflect the failure mechanism of materials and is usually used to be a method to predict fatigue life or residual fatigue life.But the variable which can represent the health of machine is hardly measure...Paris law can reflect the failure mechanism of materials and is usually used to be a method to predict fatigue life or residual fatigue life.But the variable which can represent the health of machine is hardly measured on line.To a degree,the difficulty of on-line application restricts the scope of application of Paris law.The relationship between characteristic values of vibration signals and the variable in the Paris equation which can describe the health of machine is investigated by taking ball bearings as investigative objects.Based on 6205 deep groove ball bearings as a living example,historical lives and vibration signals are analyzed.The feasibility of describing that variable in the Paris equation by the characteristic value of vibration signals is inspected.After that vibration signals decomposed by empirical mode decomposition（EMD）,root mean square（RMS） of intrinsic mode function（IMF） involving fault characteristic frequency has a consistent trend with the diameter of flaws.Based on the trend,two improved Paris models are proposed and the scope of application of them is inspected.These two Paris Models are validated by fatigue residual life data from tests of rolling element bearings and vibration signals monitored in the process of operation of rolling element bearings.It shows that the first improved Paris Model is simple and plain and it can be easily applied in actual conditions.The trend of the fatigue residual life predicted by the second improved Paris model is close to the actual conditions and the result of the prediction is slightly greater than the truth.In conclusion,after the appearance of detectable faults,these improved models based on RMS can predict residual fatigue life on line and a new approach to predict residual fatigue life of ball bearings on line without disturbing the machine running is provided.展开更多
基金supported by Sustentation Program of National Ministries and Commissions of China (Grant No. 203020102)
文摘Data obtained from accelerated life testing （ALT） when there are two or more failure modes, which is commonly referred to as competing failure modes, are often incomplete. The incompleteness is mainly due to censoring, as well as masking which might be the case that the failure time is observed, but its corresponding failure mode is not identified. Because the identification of the failure mode may be expensive, or very difficult to investigate due to lack of appropriate diagnostics. A method is proposed for analyzing incomplete data of constant stress ALT with competing failure modes. It is assumed that failure modes have s-independent latent lifetimes and the log lifetime of each failure mode can be written as a linear function of stress. The parameters of the model are estimated by using the expectation maximum （EM） algorithm with incomplete data. Simulation studies are performed to check＇model validity and investigate the properties of estimates. For further validation, the method is also illustrated by an example, which shows the process of analyze incomplete data from ALT of some insulation system. Because of considering the incompleteness of data in modeling and making use of the EM algorithm in estimating, the method becomes more flexible in ALT analysis.
基金Sponsored by National Natural Science Foundation of China(51178372/E080201)Humanities and Social Science Program of Northwest A&F University(2015RWYB38)
文摘Taking landscape design of Suburban Park in Yulin City for example, this paper applied the design thoughts of integrating multiple planning, defining concepts and objectives, specified the design strategies of restoring ecology, improving life and promoting production, and disclosed the landscape design mode based on the integration of ecology, production and life in which ecological landscapes, productive landscapes and living landscapes promote and coexist harmoniously with each other.
基金This study was supported by a grant from the Health Bureau of Zhejiang Province Research Program (No.2004A024).
文摘With the great development of liver transplantation in China, long survival and quality of life after liver transplantation have been matters of growing interest. This study was designed to investigate the impact of personality and coping skills on the quality of life after liver transplantation. METHODS:Fifty-five outpatients who had been followed up after liver transplantation at our center were assessed by general quality of life inventory (GQOLI-74 ), a medical coping modes questionnaire (MCMQ), an eysenck personality questionnaire (EPQ), and a general condition questionnaire (GCQ). RESULTS: The score for material well-being was the lowest (63.22±12.67) and for psychological well-being the highest (73.43±12.60) in 4 dimensions of the GQOLI in post transplantation patients. Their main coping method was confrontation (21.40±3.70). The main characteristics of their personality were extraversation (E score 12.96±4.13) and neuroticism (N score 8.20±4.90) . The total score of the GQOLI was positively correlated with confrontation and E score, and it was negatively correlated with acceptance and N score. The physical well-being positively associated with the E score. The psychological well-being was positively correlated with confrontation and L score, and was negatively correlated with acceptance, P and N score. Social well-being was positively correlated with confrontation and E score, and was negatively correlated with acceptance and N score. Material well-being was not correlated with coping methods and personality. CONCLUSION:The quality of life in post liver transplantation patients is associated with their psychological characteristics.
基金support from "973 Project" (Contract No. 2010CB226706)
文摘Eight casing failure modes and 32 risk factors in oil and gas wells are given in this paper. According to the quantitative analysis of the influence degree and occurrence probability of risk factors, the Borda counts for failure modes are obtained with the Borda method. The risk indexes of failure modes are derived from the Borda matrix. Based on the support vector machine （SVM）, a casing life prediction model is established. In the prediction model, eight risk indexes are defined as input vectors and casing life is defined as the output vector. The ideal model parameters are determined with the training set from 19 wells with casing failure. The casing life prediction software is developed with the SVM model as a predictor. The residual life of 60 wells with casing failure is predicted with the software, and then compared with the actual casing life. The comparison results show that the casing life prediction software with the SVM model has high accuracy.
文摘Common beans are affected by many insect pests such as bean leaf beetle, aphids, legume pod borer and bean beetles. Traditional and cultural practices such as site selection, crop rotation, intercropping and seed selection, sowing date are used to reduce the infestation of insect pests of common beans in the field and in storage rooms. Natural enemies such as predators, parasitoids and pathogens can control the insect pests. Synthetic pesticides such as cypermethion, carbaryl, and lambda-cyhalothrin have reported to be effective, but are toxic to people, destroy natural enemies and contaminate the environment. Botanical pesticides are the promising alternatives. This review paper explains toxicity, persistence and mode of actions of active ingredients of botanical pesticides. Rotenone from T. vogelii has the oral lethal dose (LD<sub>50</sub>) of 132 - 1500 mg/kg to mammals. It delays the electron transport chain in mitochondria of the insects and limits the cellular energy production. Azadirachtin is antifeedant and growth disruptor of insects. It has low toxicity to mammals. The oral LD<sub>50</sub> in mammals is greater than 3540 mg/kg. Azadirachtin displays strong effects on chemoreceptors of the insects. Pyrethrins are axonic poisons and have repellent effects to insects. It is less toxic to mammals with the LD<sub>50</sub> of about 1500 mg/Kg. It attacks the nervous systems of insects. Sesquiterpene lactones from T. diversifolia, Pentacyclic triterpenoids from Lantana camara, Vernodalin, Vernodalol and Epivernodalol from V. amygdalina have repellent and feeding deterrents chemicals which discourage the insects from feeding the crop. Most active ingredients of botanical pesticides have short life span in the environment.
基金supported by National Natural Science Foundation of China (Grant No. 50705096)National Science and Technology Major Project of China(Grant No. 2009zx04014-014)
文摘Paris law can reflect the failure mechanism of materials and is usually used to be a method to predict fatigue life or residual fatigue life.But the variable which can represent the health of machine is hardly measured on line.To a degree,the difficulty of on-line application restricts the scope of application of Paris law.The relationship between characteristic values of vibration signals and the variable in the Paris equation which can describe the health of machine is investigated by taking ball bearings as investigative objects.Based on 6205 deep groove ball bearings as a living example,historical lives and vibration signals are analyzed.The feasibility of describing that variable in the Paris equation by the characteristic value of vibration signals is inspected.After that vibration signals decomposed by empirical mode decomposition（EMD）,root mean square（RMS） of intrinsic mode function（IMF） involving fault characteristic frequency has a consistent trend with the diameter of flaws.Based on the trend,two improved Paris models are proposed and the scope of application of them is inspected.These two Paris Models are validated by fatigue residual life data from tests of rolling element bearings and vibration signals monitored in the process of operation of rolling element bearings.It shows that the first improved Paris Model is simple and plain and it can be easily applied in actual conditions.The trend of the fatigue residual life predicted by the second improved Paris model is close to the actual conditions and the result of the prediction is slightly greater than the truth.In conclusion,after the appearance of detectable faults,these improved models based on RMS can predict residual fatigue life on line and a new approach to predict residual fatigue life of ball bearings on line without disturbing the machine running is provided.
