Effect of preparation methods on the structure and catalytic performance of Fe–Zn/K catalysts for CO2 hydrogenation to light olefins

Potassium promoted iron–zinc catalysts prepared by co-precipitation method(C–Fe–Zn/K),solvothermal method(S–Fe–Zn/K)and hydrothermal method(H–Fe–Zn/K)could selectively convert CO_2to light olefins,respectively.The physicochemical properties of the obtained catalysts were determined by SEM,N_2physisorption,XRD,H_2-TPR,CO_2-TPD and XPS measurements.The results demonstrated that preparation methods had great influences on the morphology,phase structures,reduction and adsorption behavior,and hence the catalytic performance of the catalysts.The samples prepared by hydrothermal and co-precipitation method generated small uniform particles and led to lower specific surface area.In contrast,microspheres with larger specific surface area were formed by self-assembly of nanosheets using solvothermal method.ZnFe_2O_4was the only detectable phase in the fresh C–2Fe–1Zn/K,S–3Fe–1Zn/K and S–2Fe–1Zn/K samples.ZnFe_2O_4and ZnO co-existed with increasing Zncontent in S–1Fe–1Zn/K sample,while ZnO and Fe_2O_3could be observed over H–2Fe–1Zn/K sample.All the used samples contained Fe_3O_4,ZnO and Fe_5C_2.The peak intensity of ZnO was strong in the AR-H–2Fe–1Zn/K sample while it was the lowest in the AR-C–2Fe–1Zn/K sample after reaction.The formation of ZnFe_2O_4increased the interaction between iron and zinc for C–2Fe–1Zn/K and S–Fe–Zn/K samples,causing easier reduction of Fe_2O_3to Fe_3O_4.The surface basicity of the sample prepared by co-precipitation method was much more than that of the other two methods.During CO_2hydrogenation,all the catalysts showed good activity and olefin selectivity.The CO selectivity was increased with increasing Zncontent over S–Fe–Zn/K samples.H–2Fe–1Zn/K catalyst preferred to the production of C_5^+hydrocarbons.CO_2conversion of 54.76%and C_2~=–C_4~=contents of 57.38%were obtained on C–2Fe–1Zn/K sample,respectively.

Analysis of Sucrose Esters with Long Acyl Chain by Coupling of HPLC-ELSD with ESI-MS System

The analysis of sucrose esters with long acyl chain by improved high performance liquid chromatographic method with evaporative light scattering detection （HPLC-ELSD） and electrospray ionization mass spectrum （ESI-MS） is investigated. The improved HPLC-ELSD method for the separation and quantitation of commercial and synthesized sucrose esters is described. Samples are analyzed by means of a reversed-phase （RP） HPLC using a Hypersil C8 column （250 mm× 4.6 mm, 5 μm particle size） with methanol-tetrahydrofuran （vo）ume ratio of 90 ： 10） and water under gradientcondition as the mobile phase, in which the flow rate is 1.0 ml·min^-1 and the column temperature is set at 40℃. This procedure provides a complete separation and determination ot monoester, diester, triester and higher esters with different acyl chain lengths in each fraction by a single run, in combination with the ESI-MS technology. With this method, it is possible to determine the approximate compositions of monoto polyesters in one analysis and quantitate pure positional isomers precisely using an external standard method. It is found that the method of ESI-MS coupling with HPLC system for the analysis of sucrose esters is straight forward, rapid and inexpensive, and can be readily applied in synthesis, purification and structure studies.

A New Discriminating Experiment on the Invariance Hypothesis of Light Speed

This thesis puts forward a conjecture that, owing to some unknown special character of light, it is impossible to determine whether the speed of light is variable by the interference method. To verify the hypothesis of the invariance of light speed, a new method must be found to take accurate measurement of the infinitesimal change in the travelling time of light. The thesis suggests the adoption of high frequency laser pulse technology to carry out the measurement. On the basis of this idea a new discriminating experiment is proposed to test the hypothesis of the invariance of light speed. The thesis also makes some forecast of the future prospects of this experiment and of the future development of the theory of special relativity.

Size effect of lattice material and minimum weight design

The size effects of microstructure of lattice materials on structural analysis and minimum weight design are studied with extented multiscale finite element method（EMsFEM） in the paper. With the same volume of base material and configuration, the structural displacement and maximum axial stress of micro-rod of lattice structures with different sizes of microstructure are analyzed and compared.It is pointed out that different from the traditional mathematical homogenization method, EMsFEM is suitable for analyzing the structures which is constituted with lattice materials and composed of quantities of finite-sized micro-rods.The minimum weight design of structures composed of lattice material is studied with downscaling calculation of EMsFEM under stress constraints of micro-rods. The optimal design results show that the weight of the structure increases with the decrease of the size of basic sub-unit cells. The paper presents a new approach for analysis and optimization of lattice materials in complex engineering constructions.

Determination of Thioglucoside in Cabbage by Using the Ultraviolet-visible Light Spectrophotometer

The ultraviolet-visible light spectrophotometer method was adopted to determine thioglucoside in cabbage with the seeds.Individual plant of cabbage was used as test materials,palladium chloride as complexing agent and sodium cellulose glycolate as dispersing agent.The results showed that palladiumd thioglucoside method could be taken as a quick,easy and precise quantitative analysis method to determine thioglucoside in cabbage.

Spatial Model of Sky Brightness Magnitude in Langkawi Island, Malaysia

Sky brightness is an essential topic in the field of astronomy, especially for optical astronom- ical observations that need very clear and dark sky conditions. This study presents the spatial model of sky brightness magnitude in Langkawi Island, Malaysia. Two types of Sky Quality Meter （SQM） manu- factured by Unihedron are used to measure the sky brightness on a moonless night （or when the Moon is below the horizon）, when the sky is cloudless and the locations are at least 100 m from the nearest light source. The selected locations are marked by their GPS coordinates. The sky brightness data obtained in this study were interpolated and analyzed using a Geographic Information System （GIS）, thus producing a spatial model of sky brightness that clearly shows the dark and bright sky areas in Langkawi Island. Surprisingly, our results show the existence of a few dark sites nearby areas of high human activity. The sky brightness of 21.45 mag arcsec-2 in the Johnson-Cousins V-band, as the average of sky brightness equivalent to 2.8 × 10-4cd m-2 over the entire island, is an indication that the island is, overall, still relatively dark. However, the amount of development taking place might reduce the number in the near future as the island is famous as a holiday destination.

A Novel Method for Measuring the Coarse Water Droplets in Wet Steam Flow in Steam Turbines

Some optical probes based on light extinction have been developed to measure wetness dominated with fine droplets in steam turbine. However, coarse water droplets (hereafter referred to as CWD) that are the main cause of erosion of blade and of wetness loss of steam turbine can’t be detected by the extinction probes because of its large size. In this paper, a new method - the light fluctuation method is presented that is capable of measuring the she of CWD. A new probe based on this method was developed for measuring the she of CWD as well as its velocity and concentration.

STUDIES ON THE EXPOSITION OF HYDROXYL RADICAL FROM HEMATOPORPHYRIN DERIVATIVE SOLUTION TO LIGHT BY SPIN-TRAPPING METHOD

That the photosensitive action of hematoporphyrin can damage tumor cells, has attracted much attention recently. However, its mechanism of action is not very clear. Some reported that the damage is due to the production of singlet oxygen （1O2）, a cy-

Characterizing a liquid crystal spatial light modulator at oblique incidence angles using the self-interference method

The phase modulation characteristics of a reflective liquid crystal （LC） spatial light modulator （SLM） under oblique incidence are studied by using our proposed self-interference method. The experimental setup of the method is very simple and has good robustness to mechanical vibrations. By changing the gray value of the combined grayscale loaded on the LC-SLM, different sheared fringe patterns, generated by the interference between the constant phase-modulated beam and the ＋1-order diffracted beam of the blazed grating, can be obtained. The amount of phase modulation of the LC-SLM is obtained by subtracting the phase of the two side lobes in the frequency domain. By turning the turntable where the SLM is mounted, the phase modulation characteristics at different incident angles can be measured. The experimental results show that the phase modulation curves do not change significantly with the small angle. When the angle is large （i.e. larger than 10°）, the phase modulation curves become different, especially for the high gray levels. With the increase of the incident angle, the phase modulation depth is reduced. The results indicate that the incident angle plays an important role in the performance of the phase modulation of an LC-SLM.

Kinetics of ring-opening polymerization of octamethylcyclotetrasiloxane in microemulsion

Polysiloxane latexes were prepared by microemulsion polymerization of octamethylcyclotetrasiloxane （D4） in the absence of co-emulsifier with octadecyl trimethyl ammonium chloride as a cationic emulsifier and potassium hydrate as an initiator. The particle size was determined by the dynamic light scattering （DLS） technique and the reaction rates of the polymerization were discussed. Furthermore, the kinetics was studied by an initial-rate method, and the effects of the monomer, emulsifier and initiator concentrations and the temperature on polymerization conversions were investigated. From the kinetic results, the rate of polymerization, Rp at 80℃ can be expressed as Rp = k[D4]^0.79 [OTAC]^0.64[KOH]^0.38 and the aonarent activation energy（Ea）. which was determined by half-period method, is 95.32 kJ mol^-1.