In this paper, we consider the second-grade fluid equations in a 2D exterior domain satisfying the non-slip boundary conditions. The second-grade fluid model is a wellknown non-Newtonian fluid model, with two paramete...In this paper, we consider the second-grade fluid equations in a 2D exterior domain satisfying the non-slip boundary conditions. The second-grade fluid model is a wellknown non-Newtonian fluid model, with two parameters: α, which represents the length-scale,while ν > 0 corresponds to the viscosity. We prove that, as ν, α tend to zero, the solution of the second-grade fluid equations with suitable initial data converges to the one of Euler equations, provided that ν = o(α^(4/3)). Moreover, the convergent rate is obtained.展开更多
The GaInSn liquid metal current limiter based on the fluid pinch effect has broad application prospects due to its particular properties. However, the limited rated current and abil- ity of power dissipation are the c...The GaInSn liquid metal current limiter based on the fluid pinch effect has broad application prospects due to its particular properties. However, the limited rated current and abil- ity of power dissipation are the critical problems for its wide application. Firstly, the temperature distribution of the liquid metal current limiter (LMCL) was obtained by experiments with a rated current of 1 kA and the arc ignition phenomenon was observed with 1.5 kA, which indicates that the rated current is mainly limited by the arc rather than the high temperature compared to the traditional switchgears. Furthermore, an improved method is proposed by adding the paralleled pure resistance, impedance or another LMCL element to protect the setup from the fault energy concentration in the setup. The problem of a slower arc voltage increasing rate can be solved by adding a paralleled impedance with suitable parameters. Finally, the current limiting properties based on the improved method were investigated and the alternating oscillating current was found between two paralleled LMCL elements owing to their deviation of arc ignition in reality.展开更多
Sundial solar tracking machines are machines that tracking the sun,and can promote sunshine receiving efficiency of solar panels.Their operations are strongly influenced by wind load.Previous studies were focused on t...Sundial solar tracking machines are machines that tracking the sun,and can promote sunshine receiving efficiency of solar panels.Their operations are strongly influenced by wind load.Previous studies were focused on tracking accuracy and tracking methods,the influence of wind load to the operation of the tracking machines has not caused enough attention,so that many tracking machines did not have the reasonable design basis,which led to unreasonable design and high maintenance costs,and had seriously influenced the application and popularization of the tracking machines.Therefore,the 16 m2 sundial solar tracking machine is taken as research object from the perspective of wind load.A series of computational fluid dynamics(CFD) analyses are carried out on the model of the 16 m2 sundial solar tracking machine.Firstly,in order to make CFD analyses carry on smoothly,after the three-dimensional solid model is established,the model is simplified,and grids are meshed on the simplified model.Then,in the virtual environment,to make the simulation closer to real but at the same time not too complex to make simulation hard to realize,assumptions of the nature of air flow are conducted,boundary conditions of the analyses are set reasonably,and appropriate CFD analysis solver is also chosen.Finally,the results of the CFD analyses are also analyzed and sorted;and limit requirements(i.e.,force conditions of limit case),such as the maximum load and the maximum total torque,are provided for the further finite element analyses(FEA) and the optimization design of the products.This paper presents an effective computer simulation analysis method for the design and optimization of this type of solar tracking machine,and this method can greatly shorten the development cycle and cost.展开更多
Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system und...Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system under consideration. The spatial coordinate of the system is discretized by DQM (differential quadrature method). On the basis of the boundary conditions, the dynamic equation is solved by the Newton Raphson iteration method. The numerical solutions reveal several complex dynamic motions for the variation of the fluid velocity parameter, such as limit cycle motion, buckling and so on. The result obtained also shows that the sub parameter regions corresponding to the several motions may change with the variation of some parameters of the curved pipe. The present study supplies a new reference for investigating the nonlinear dynamic response of some other structures.展开更多
AIM: To explore an improved procedure involving incomplete fluid-air exchange for idiopathic macular hole(IMH), and the closure rate, visual function, and the visual field of macular holes(MHs) were evaluated.METHODS:...AIM: To explore an improved procedure involving incomplete fluid-air exchange for idiopathic macular hole(IMH), and the closure rate, visual function, and the visual field of macular holes(MHs) were evaluated.METHODS: This prospective randomized controlled study, included 40 eyes of 40 patients with IMH who were treated with pars plana vitrectomy and peeling of the internal limiting membrane. They were grouped by random digital table. Twenty-one eyes underwent incomplete fluidair exchange(IFA) and 19 eyes underwent traditional complete fluid-air exchange(CFA) as the control group. Outcomes included best-corrected visual acuity(BCVA), intraocular pressure, and optical coherence tomography, light adaptive electroretinography, and visual field evaluations.RESULTS: All MHs <400 μm were successfully closed. BCVAs before and 6 mo after surgery were 0.82±0.41 logMAR and 0.28±0.17 logMAR in IFA group and 0.86±0.34 logMAR and 0.34±0.23 logMAR in CFA group, respectively. The electroretinogram analysis of patients in IFA group revealed increases in b-wave amplitudes at 1, 3, and 6 mo after surgery. Additionally, patients in IFA group showed an amplitude increase of 28.6% from baseline at 6 mo(P<0.05), while no obvious improvements were noted in CFA group. Although there were no statistically significant improvements in either group, the IFA group showed a slight increase in mean sensitivity(P>0.05).CONCLUSION: IFA is a reliable method that offers comparable closure rate to CFA and facilitates improvements in visual function.展开更多
The complex liquid film behaviors at flooding in an inclined pipe were investigated with computational fluid dynamic(CFD) approaches. The liquid film behaviors included the dynamic wave characteristics before flooding...The complex liquid film behaviors at flooding in an inclined pipe were investigated with computational fluid dynamic(CFD) approaches. The liquid film behaviors included the dynamic wave characteristics before flooding and the transition of flow pattern when flooding happened. The influences of the surface tension and liquid viscosity were specially analyzed. Comparisons of the calculated velocity at the onset of flooding with the available experimental results showed a good agreement. The calculations verify that the fluctuation frequency and the liquid film thickness are almost unaffected by the superficial gas velocity until the flooding is triggered due to the Kelvin–Helmholtz instability. When flooding triggered at the superficial liquid velocity larger than0.15 m·s-1, the interfacial wave developed to slug flow, while it developed to entrainment flow when it was smaller than 0.08 m·s-1. The interfacial waves were more easily torn into tiny droplets with smaller surface tension, eventually evolving into the mist flow. When the liquid viscosity increases, the liquid film has a thicker holdup with more intensive fluctuations, and more likely developed to the slug flow.展开更多
目的比较限制液体复苏与积极液体复苏救治创伤失血性休克的临床效果,以提高治愈率。方法将符合创伤失血性休克患者随机分为限制液体复苏组和积极液体复苏组,对其临床资料和实验室指标进行统计学分析。结果限制性液体复苏组与积极液体复...目的比较限制液体复苏与积极液体复苏救治创伤失血性休克的临床效果,以提高治愈率。方法将符合创伤失血性休克患者随机分为限制液体复苏组和积极液体复苏组,对其临床资料和实验室指标进行统计学分析。结果限制性液体复苏组与积极液体复苏组比较,收缩压差异无显著性(院前51±19 mmHg vs 50±21 mmHg,术前74±27 mmHg vs 82±28 mmHg,P>0.05),输液量显著降低(院前232±215 mL vs 830±542 mL,术前328±309 mL vs 1905±1340 mL,P<0.01),死亡率降低(13.3%vs 27.8%,P<0.05),术前血红蛋白升高(94±21 g/L vs 85±23 g/L,P<0.05),术前凝血指标好转〔血小板计数(268±94)×109/L vs(233±91)×109/L,P<0.05;凝血酶原时间12.3±1.7 s vs 14.5±1.9 s,P<0.01;部分凝血酶原时间36.5±14.1 s vs 41.8±18.5 s,P<0.05〕。结论救治创伤失血性休克限制液体复苏法可能优于积极液体复苏法。展开更多
基金Aibin Zang was supported partially by the National Natural Science Foundation of China (11771382, 12061080, 12261093)the Jiangxi Provincial Natural Science Foundation (20224ACB201004)。
文摘In this paper, we consider the second-grade fluid equations in a 2D exterior domain satisfying the non-slip boundary conditions. The second-grade fluid model is a wellknown non-Newtonian fluid model, with two parameters: α, which represents the length-scale,while ν > 0 corresponds to the viscosity. We prove that, as ν, α tend to zero, the solution of the second-grade fluid equations with suitable initial data converges to the one of Euler equations, provided that ν = o(α^(4/3)). Moreover, the convergent rate is obtained.
基金supported by the Technology Project of State Grid(No.SGSNKYOOKJJS1501564)the National Key Basic Research Program of China(973 Program)(No.2015CB251005)
文摘The GaInSn liquid metal current limiter based on the fluid pinch effect has broad application prospects due to its particular properties. However, the limited rated current and abil- ity of power dissipation are the critical problems for its wide application. Firstly, the temperature distribution of the liquid metal current limiter (LMCL) was obtained by experiments with a rated current of 1 kA and the arc ignition phenomenon was observed with 1.5 kA, which indicates that the rated current is mainly limited by the arc rather than the high temperature compared to the traditional switchgears. Furthermore, an improved method is proposed by adding the paralleled pure resistance, impedance or another LMCL element to protect the setup from the fault energy concentration in the setup. The problem of a slower arc voltage increasing rate can be solved by adding a paralleled impedance with suitable parameters. Finally, the current limiting properties based on the improved method were investigated and the alternating oscillating current was found between two paralleled LMCL elements owing to their deviation of arc ignition in reality.
基金supported by the Second Stage of Jilin University "985"Project-Northeast Resources and Environment Technology Innovation Platform of China (Grant No. 450070021107)
文摘Sundial solar tracking machines are machines that tracking the sun,and can promote sunshine receiving efficiency of solar panels.Their operations are strongly influenced by wind load.Previous studies were focused on tracking accuracy and tracking methods,the influence of wind load to the operation of the tracking machines has not caused enough attention,so that many tracking machines did not have the reasonable design basis,which led to unreasonable design and high maintenance costs,and had seriously influenced the application and popularization of the tracking machines.Therefore,the 16 m2 sundial solar tracking machine is taken as research object from the perspective of wind load.A series of computational fluid dynamics(CFD) analyses are carried out on the model of the 16 m2 sundial solar tracking machine.Firstly,in order to make CFD analyses carry on smoothly,after the three-dimensional solid model is established,the model is simplified,and grids are meshed on the simplified model.Then,in the virtual environment,to make the simulation closer to real but at the same time not too complex to make simulation hard to realize,assumptions of the nature of air flow are conducted,boundary conditions of the analyses are set reasonably,and appropriate CFD analysis solver is also chosen.Finally,the results of the CFD analyses are also analyzed and sorted;and limit requirements(i.e.,force conditions of limit case),such as the maximum load and the maximum total torque,are provided for the further finite element analyses(FEA) and the optimization design of the products.This paper presents an effective computer simulation analysis method for the design and optimization of this type of solar tracking machine,and this method can greatly shorten the development cycle and cost.
文摘Investigated in this study is the flow induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system under consideration. The spatial coordinate of the system is discretized by DQM (differential quadrature method). On the basis of the boundary conditions, the dynamic equation is solved by the Newton Raphson iteration method. The numerical solutions reveal several complex dynamic motions for the variation of the fluid velocity parameter, such as limit cycle motion, buckling and so on. The result obtained also shows that the sub parameter regions corresponding to the several motions may change with the variation of some parameters of the curved pipe. The present study supplies a new reference for investigating the nonlinear dynamic response of some other structures.
基金Supported by National Natural Science Foundation of Xinjiang Autonomous Region, China (No.81460089)
文摘AIM: To explore an improved procedure involving incomplete fluid-air exchange for idiopathic macular hole(IMH), and the closure rate, visual function, and the visual field of macular holes(MHs) were evaluated.METHODS: This prospective randomized controlled study, included 40 eyes of 40 patients with IMH who were treated with pars plana vitrectomy and peeling of the internal limiting membrane. They were grouped by random digital table. Twenty-one eyes underwent incomplete fluidair exchange(IFA) and 19 eyes underwent traditional complete fluid-air exchange(CFA) as the control group. Outcomes included best-corrected visual acuity(BCVA), intraocular pressure, and optical coherence tomography, light adaptive electroretinography, and visual field evaluations.RESULTS: All MHs <400 μm were successfully closed. BCVAs before and 6 mo after surgery were 0.82±0.41 logMAR and 0.28±0.17 logMAR in IFA group and 0.86±0.34 logMAR and 0.34±0.23 logMAR in CFA group, respectively. The electroretinogram analysis of patients in IFA group revealed increases in b-wave amplitudes at 1, 3, and 6 mo after surgery. Additionally, patients in IFA group showed an amplitude increase of 28.6% from baseline at 6 mo(P<0.05), while no obvious improvements were noted in CFA group. Although there were no statistically significant improvements in either group, the IFA group showed a slight increase in mean sensitivity(P>0.05).CONCLUSION: IFA is a reliable method that offers comparable closure rate to CFA and facilitates improvements in visual function.
基金Supported by the Major State Basic Research Development Program of China(2011CB706501)the National Natural Science Foundation of China(51276157)
文摘The complex liquid film behaviors at flooding in an inclined pipe were investigated with computational fluid dynamic(CFD) approaches. The liquid film behaviors included the dynamic wave characteristics before flooding and the transition of flow pattern when flooding happened. The influences of the surface tension and liquid viscosity were specially analyzed. Comparisons of the calculated velocity at the onset of flooding with the available experimental results showed a good agreement. The calculations verify that the fluctuation frequency and the liquid film thickness are almost unaffected by the superficial gas velocity until the flooding is triggered due to the Kelvin–Helmholtz instability. When flooding triggered at the superficial liquid velocity larger than0.15 m·s-1, the interfacial wave developed to slug flow, while it developed to entrainment flow when it was smaller than 0.08 m·s-1. The interfacial waves were more easily torn into tiny droplets with smaller surface tension, eventually evolving into the mist flow. When the liquid viscosity increases, the liquid film has a thicker holdup with more intensive fluctuations, and more likely developed to the slug flow.
文摘目的比较限制液体复苏与积极液体复苏救治创伤失血性休克的临床效果,以提高治愈率。方法将符合创伤失血性休克患者随机分为限制液体复苏组和积极液体复苏组,对其临床资料和实验室指标进行统计学分析。结果限制性液体复苏组与积极液体复苏组比较,收缩压差异无显著性(院前51±19 mmHg vs 50±21 mmHg,术前74±27 mmHg vs 82±28 mmHg,P>0.05),输液量显著降低(院前232±215 mL vs 830±542 mL,术前328±309 mL vs 1905±1340 mL,P<0.01),死亡率降低(13.3%vs 27.8%,P<0.05),术前血红蛋白升高(94±21 g/L vs 85±23 g/L,P<0.05),术前凝血指标好转〔血小板计数(268±94)×109/L vs(233±91)×109/L,P<0.05;凝血酶原时间12.3±1.7 s vs 14.5±1.9 s,P<0.01;部分凝血酶原时间36.5±14.1 s vs 41.8±18.5 s,P<0.05〕。结论救治创伤失血性休克限制液体复苏法可能优于积极液体复苏法。