A line laser detection screen design and projectile echo power calculation in detection screen area

A line laser with high power as the background light source for the design of a new photoelectric detection target is proposed in this paper, aiming to improve the detection ability of the traditional photoelectric detection target under low background illumination. The laser emitted pulse waveform function and the laser echo pulse response function were used to establish the mathematical model of the reflected echo power of projectile in the detection area and derive the calculation function of minimum detectable echo power in the line laser detection screen, according to information of the line laser emitted power, incident angle of projectile, duration time and detection distance of projectile passing through the line laser detection screen. Calculations and experimental results showed that the design method of line laser detection screen and calculation model of laser echo power are reasonable, and the detection ability of line laser detection screen is obviously higher than that of traditional photoelectric detection screen, especially in low background illumination;at the same time, the designed line laser detection screen was used to combine a six line laser detection screen intersection test system, based on live ammunition for shooting. The test system is stable and able to obtain the dynamic parameters of the flying projectile, verifying that the design of the line laser detection screen in new photoelectric detection target can be suitable for shooting range test applications.

A fast and precise three-dimensional measurement system based on multiple parallel line lasers

This paper conducts a trade-off between efficiency and accuracy of three-dimensional(3 D)shape measurement based on the triangulation principle,and introduces a flying and precise 3 D shape measurement method based on multiple parallel line lasers.Firstly,we establish the measurement model of the multiple parallel line lasers system,and introduce the concept that multiple base planes can help to deduce the unified formula of the measurement system and are used in simplifying the process of the calibration.Then,the constraint of the line spatial frequency,which maximizes the measurement efficiency while ensuring accuracy,is determined according to the height distribution of the object.Secondly,the simulation analyzing the variation of the systemic resolution quantitatively under the circumstance of a set of specific parameters is performed,which provides a fundamental thesis for option of the four system parameters.Thirdly,for the application of the precision measurement in the industrial field,additional profiles are acquired to improve the lateral resolution by applying a motor to scan the 3 D surface.Finally,compared with the line laser,the experimental study shows that the present method of obtaining 41220 points per frame improves the measurement efficiency.Furthermore,the accuracy and the process of the calibration are advanced in comparison with the existing multiple-line laser and the structured light makes an accuracy better than 0.22 mm at a distance of 956.02 mm.

Improvement of Binocular Reconstruction Algorithm for Measuring 3D Pavement Texture Using a Single Laser Line Scanning Constraint

The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function.To form dense mandatory constraints and improve matching accuracy,the traditional binocular reconstruction technology was improved threefold.First,a single moving laser line was introduced to carry out global scanning constraints on the target,which would well overcome the difficulty of installing and recognizing excessive laser lines.Second,four kinds of improved algorithms,namely,disparity replacement,superposition synthesis,subregion segmentation,and subregion segmentation centroid enhancement,were established based on different constraint mechanism.Last,the improved binocular reconstruction test device was developed to realize the dual functions of 3D texture measurement and precision self-evaluation.Results show that compared with traditional algorithms,the introduction of a single laser line scanning constraint is helpful in improving the measurement’s accuracy.Among various improved algorithms,the improvement effect of the subregion segmentation centroid enhancement method is the best.It has a good effect on both overall measurement and single pointmeasurement,which can be considered to be used in pavement function evaluation.

Temperature Field in Laser Line Scanning Thermography: Analytical Calculation and Experiment

The temperature field in laser line scanning thermography is investigated comprehensively in this work,including analytical calculation and experiment.Firstly,the principle of laser line scanning thermography is analyzed.On this basis,a physical laser line scanning model is proposed.Afterwards,based on Fourier transform(FT)and segregation variablemethod(SVM),the heat conduction differential equation in laser line scanning thermography is derived in detail.The temperature field of the composite-based coatings model with defects is simulated numerically.The results show that the laser line scanning thermography can effectively detect the defects in the model.The correctness of the analytical calculation is verified by comparing the surface temperature distribution obtained by analytical calculation and numerical simulation.Additionally,an experiment is carried out and the changeable surface temperature obtained by analytical calculation is compared with the experimental results.It shows that the error of maximum temperature obtained by analytical calculation and by experiment is 8%with high accuracy,which proves the correctness of analytical calculation and enriches the theoretical foundation of laser line scanning thermography.

Global Calibration Method of Multi-sensor Vision System Using Skew Laser Lines

Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which makes the global calibration of the vision system quite difficult.The primary existing solution relies on large-scale surveying equipments,which is ponderous and inconvenient for field calibrations.In this paper,a global calibration method of multi-sensor vision system is proposed and investigated.The proposed method utilizes pairs of skew laser lines,which are generated by a group of laser pointers,as the calibration objects.Each pair of skew laser lines provides a unique coordinate system in space which can be reconstructed in certain vision sensor＇s coordinates by using a planar pattern.Then the geometries of sensors are computed under rigid transformation constrains by taking coordinates of each skew lines pair as the intermediary.The method is applied on both visual cameras with synthetic data and a real two-camera vision system;results show the validity and good performance.The prime contribution of this paper is taking skew laser lines as the global calibration objects,which makes the method simple and flexible.The method need no expensive equipments and can be used in large-scale calibration.

Beam Line Design of Compact Laser Plasma Accelerator

A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.

Extraction of Laser Stripe Center Line Based on Genetic Algorithm and NURBS Interpolation

To improve the measurement accuracy of structured laser for inner surface dimensions of a deep hole, a new method to extract the laser stripe center line is proposed. An improved adaptive genetic algorithm that can converge rapidly and search the global optimum is used to determine the threshold for the laser stripe segmentation. And then NURBS interpolation which has a good local control capability is adopted to extract the laser stripe center line. Experiments show that the extracted laser stripe center line is stable and the diameter of the deep hole can be measured accurately.

2D hydrodynamic simulation of a line-focused plasma in Ni-like Ag x-ray laser research

In most collisional schemes of x-ray laser （XRL） experiments, a bow-like intensity distribution of XRL is often observed, and it is generally ascribed to the two-dimensional hydrodynamic behaviour of expanding plasma. In order to better understand its essence in physics, a newly developed two-dimensional non-equilibrium radiation hydrodynamic code XRL2D is used to simulate a quasi-steady state Ni-like Ag XRL experiment on ShenGuang-Ⅱfacility. The simulation results show that the bow-like distribution of Ni-like ions caused by over-ionization in the central area of plasma is responsible for the bow-like shape of the XRL intensity distribution observed.

Investigation on the hydrodynamics of slab x-ray laser plasma by nonuiform line focused laser irradiation

Based on the two-dimensional model, this paper compares the hydrodynamics of slab x-ray laser plasma produced by different nonuniform line focused irradiations. It finds that the average intensity and the duration of laser pulse and the overall shape of the intensity distribution in the focal line have different influences on the plasma. Calculations show that the evolution of temperature variation is more sensitive to the pulse duration and the electron density variation is more sensitive to the pulse intensity. Pulses with duration of 200 ps to 500 ps and with intensity of 0.2 TW/cm2 to 1.0 TW/cm2 are proved acceptable in slab x-ray lasers.

A Laser Line Scanner Based Hole Position Correction Mechanism for Automatic Drilling and Riveting in Aircraft Assembly

The low-stiffness of aircraft skins may results in the differences between aircraft actual parts and their theoretical models,which will consequently affect the accuracy of automatic drilling and riveting in aircraft assembly.In this paper,a novel approach of hole position correction using laser line scanner(LLS)is proposed to assign a single row of holes on the parts’surfaces.First,we adopt a space circle fitting method and the random sample consensus(RANSAC)to obtain the precise coordinates of center of the datum holes’coordinates.Second,LLS is calibrated by the laser tracker,and the relations between the LLS coordinate system and the tool coordinate system(TCS)can be calculated.Third,the kinematics model of the automatic riveting machine is established based on a two-point referencing strategy proposed in this paper.Thus,the positions of the holes to be drilled can be adjusted.Finally,the experimental results show that in TCS the measurement error of LLS is less than 0.1 mm,and the correction error of the hole position is less than 0.5 mm,which demonstrates the reliability of our method.

Flexible Scanning Method by Integrating Laser Line Sensors with Articulated Arm Coordinate Measuring Machines

Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control.Owing to increasing structural complexity of recent products,measurements from multiple directions are typically required in current scanning techniques.Specifically,the plane structured light can be applied to measure one area of a part at a time,with an additional algorithm required to merge the collected data of each area.Alternatively,the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement.However,the system needs to be repeatedly calibrated at each new direction.This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines(AACMM).Since the output of the laser line sensor is 2D raw data in the laser plane,our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM(i.e.,the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM).To solve the model,the“conjugate pairs”are proposed and identified by measuring a fixed point(e.g.,a sphere center).Moreover,a search algorithm is adopted to find the optimal solution,which noticeably boosts the model accuracy.The experimental results show that the error of the system is about 0.2 mm,which is caused by the error of the AACMM,the sensor error and the calibration error.By measuring a complicated part,the proposed system is proved to be flexible and facilitate,with the ability to measure a part expediently from any necessary direction.Furthermore,the proposed calibration method can also be used for robot hand-eye relationship calibration.

Synchronization and bidirectional communication without delay line using strong mutually coupled semiconductor lasers

This paper numerically demonstrates synchronization and bidirectional communication without delay line by using two semiconductor lasers with strong mutual injection in a face-to-face configuration. These results show that both of the two lasers＇ outputs synchronize with their input chaotic carriers. In addition, simulations demonstrate that this kind of synchronization can be used to realize bidirectional communications without delay line. Further studies indicate that within a small deviation in message amplitudes of two sides （±6%）, the message can be extracted with signal-noise-ratio more than 10 dB; and the signal-noise-ratio is extremely sensitive to the message rates mismatch of two sides, which may be used as a key of bidirectional communication.

Using Narrow Line-Width Laser to Measure the Thickness and Refractive Index of the Film

We demonstrate applications of a novel setup which is used for measuring the relative phase difference between S and P polarization at an oblique incidence point in optically denser medium by analyzing the relative frequency shift of adjacent axial modes of S and P resonances of a monolithic folded Fabry-Perot cavity (MFC). The relative phase difference at a reflection point A in an optically denser medium is inferred to be around -167.4° for a confocal cavity and -201.1° for a parallel cavity. Given the n1, n3, φ1, φ3, λ, and Δ, the elliptic formula tan(ψ)exp(iΔ) = Rp/Rs is used to find a solution for thickness d and refractive index n2 of the thin film coated on point A, where Rs and Rp are total refractive index of s and p component of light related to two unknown values. Since it is hard to deduce an analytical solution for thickness and refractive index of the film, we firstly used exhaustion method to find the set of solution about thickness and refractive index when assumed there is no light absorption by the film and then Particle Swarm Optimization (PSO) to find a set of solution of thickness and complex refractive index which accounts the light absorption by the film.

Measurement of Plasma Parameters in Laser-Induced Breakdown Spectroscopy Using Si-Lines

The electron density and temperature of the laser induced silicon plasma were measured using two different methods. The plasma was produced via the interaction of high peak power Nd-YAG laser at the fundamental wavelength of 1064 nm with a plane solid iron target contain small traces of silicon as an element of minor concentration. The lines from the Si I at 288.15 nm and Si II-ionic lines at 413.08 and 634.71 nm were utilized to evaluate the plasma parameters. The reference plasma parameters were measured utilizing the Hα-line at 656.27 nm appeared in the spectra under the same condition. The electron density was measured utilizing the Stark broadening of the silicon lines and the temperature from the standard Saha-Boltzmann plot method. The comparison between electron densities from different silicon lines to that from the Hα-line reveals that the Si I-line at 288.15 nm contain some optical thickness while the Si II-ionic lines were found to be free from this effect. The measurements were repeated at different delay times between the laser and the camera in the range from 1 - 5 μsec. The electron density was found decreases from 2 × 1018 down to 4 × 1017 cm–3. After correcting the spectral intensity at the Si I-line at 288.15 nm, the temperatures evaluated from the different methods were found in an excellent agreement and decreases from 1.25 down to 0.95 eV with delay time.

Processing of Laser Scanner Data and Extraction of Structure Lines Using Methods of the Image Processing

激光扫描数据提供了一种新的手段用于获取高精度的数字地形表面模型。原始的航空激光扫描数据表达的是一些非规则分布的“点云” ,这些非规则分布的点需要进行有效的事后处理。这种事后处理有 2个目的 :一是将那些分布在地表面上的点 (即地面点 )与分布在非地表面上的点 (譬如树木、房屋或汽车上的点 ,即非地面点 )进行有效的分离 ;二是从分离后的地面点中提取结构线 ,用于建立高精度的数字地面模型。作者发展了一系列的基于数字形态学理论和稳健参数估计理论的方法用于分离和探测地面点。这里所介绍和开发的提取结构线的算法建立在数字图像处理和表面曲率理论的基础上。这些算法同样可以扩展地用于其他领域。所介绍的基于数字图像处理理论处理原始的航空激光扫瞄数据和提取结构线的方法取得了很好的结果。

齿轮线激光三维测量仪的研制

快速获取齿轮全部齿面的三维误差信息,是表征复杂齿面质量的关键和前提。本文基于激光三角测量原理,建立了齿轮线激光三维测量模型,研制出齿轮线激光三维测量仪,可用于生产现场快速获取被测齿轮的三维齿面误差信息并进行质量评定。仪器采用立式结构,主要由基座、精密主轴、圆光栅传感器、控制系统、软件系统等部分组成。精密主轴采用密珠轴系实现高精度回转,保证了被测齿轮的高精度定位与回转。在精密主轴周向布置两个高精度线激光传感器,并根据被测齿轮参数调整其位姿状态;圆光栅实时获取精密主轴的回转角度,并触发采集器实时采集并记录被测齿轮左右齿面的几何信息。开发了齿轮线激光三维测量与评价软件,可实现齿轮齿廓偏差、齿距偏差、拓扑偏差等项目的测量与评定,能够满足5级精度齿轮的检测要求。

激光视觉引导下的工业机器人步态运动学参数辨识

工业机器人在多个领域都有广泛应用,而离线编程则成为其重要的发展方向。由于离线编程对机器人自身的绝对定位精度有较高要求,为提升绝对定位精度,设计一种激光视觉引导下的工业机器人步态运动学参数辨识方法。基于线结构激光测量技术,设计由工业智能相机、感光元件、滤光片、线激光器构成的激光视觉传感器,使用该传感器测量工业机器人,以获取其三维信息。通过粗引导与精引导两个步骤对激光视觉传感器实施激光视觉引导,以提高效率,降低瞄准误差。工业机器人步态运动学参数误差的辨识模型,通过最小二乘法对模型实施迭代求解,以获取精确的方程组解,从而完成步态运动学参数辨识。测试结果表明,该方法的步态运动学参数辨识误差低于0.02 mm,在30次迭代次数以内即可完成求解。

基于线结构光的厚板焊缝特征点提取算法

针对厚板结构件在使用激光视觉系统时图像特征区域提取难和工件表面加工不均匀漫反射等导致特征点提取困难的问题,提出基于线结构光的厚板焊缝特征点提取算法。首先,激光视觉系统获取焊缝图像并使用YOLOv4算法进行预训练,利用训练获取的权重文件自动检测并获取焊缝特征感兴趣区域(ROI);其次,对ROI进行降噪、二值化等处理,通过逐行(列)搜索法得到焊缝中心线;最后,根据不同焊缝类型,基于最小二乘法使用距离法和直线段聚类的方法来提取特征点。实验结果表明:该方法可有效提取不同类型的焊缝特征点,具有鲁棒性强、识别误差小等特点。

Chemical Selectivity of Laser Ion Source for on-Line Mass Separator

Thulium(Tm)atoms are resonantly ionized in a hot tube by stepwise excitations us-ing three dye lasers pumped by a series of copper vapor pulsed at a 10 kHz rate.The chemicalselectivity of the laser ion source is measured as a function of temperature of the tubes made ofTa,Nb-Zr and TaC.The chemical selectivity rises from 50 to 10000 with decreasing tube temp-erature and strongly depends on the tube material.A chemical selectivity of about 10000 withhigh efficiencies is obtained with the Nb-Zr and TaC tubes.Such a laser ion source can be usedin on-line mass separator to obtain isobarically pure ion beams.

基于线激光的压缩机曲轴圆度和平面度测量

目前人工使用千分表测量空调压缩机曲轴圆度和平面度时存在易伤工件表面、效率低和不能精确评定等问题。针对上述问题,设计了一套基于线激光位移传感器的空调压缩机曲轴圆度和平面度非接触式测量系统。首先,通过测量标准量棒,提出一种系统误差的标定方法;其次,基于线激光采样数据,开发了一种曲轴横截面圆度测点的提取算法,并将系统误差用于测点补偿,实现曲轴圆度测量;接着根据曲轴平面测点间的斜率分离出轮廓线,通过均匀下采样方法获取精简点云数据并采用最小二乘法实现曲轴平面度测量;最后,基于上述方法开展了曲轴圆度和平面度的测量实验。实验结果表明:该测量系统的圆度测量精度<4μm,平面度测量精度<2μm,圆度重复度测量误差<0.8μm,平面度重复度测量误差<0.3μm,满足曲轴圆度和平面度快速准确的测量需求。