A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of trans...A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of transformer is put into the hole, and the stylus can freely contact with the meshed concave tooth flank. The transformer is installed on the body of gear to be measured. Rotate the positioning worm slowly after loading, and locate the contact point at the hole of convex tooth flank, the displacement value measured is considered as the deformation of convex tooth. The deformations at the middle and the two ends of tooth breadth for the helical gears with double-circular-cra tooth profile whose modules are 3mm and 4mm respectively are measured in the paper.展开更多
In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for pie...In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for piecewise compensating correction was proposed. According to the mechanical structure of LVDT, the output equation was calculated, and then the theoretic nonlinear source of output was analyzed. By the proposed line-element adaptive segmentation method, the nonlinear output of LVDT was divided into linear and nonlinear regions with a given threshold. Then the com- pensating correction function was designed for nonlinear parts employing polynomial regression tech- nique. The simulation of LVDT validates the feasibility of proposed scheme, and the results of cali- bration and testing experiments fully prove that the proposed method has higher accuracy than the state-of-art correction algorithms.展开更多
文摘A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of transformer is put into the hole, and the stylus can freely contact with the meshed concave tooth flank. The transformer is installed on the body of gear to be measured. Rotate the positioning worm slowly after loading, and locate the contact point at the hole of convex tooth flank, the displacement value measured is considered as the deformation of convex tooth. The deformations at the middle and the two ends of tooth breadth for the helical gears with double-circular-cra tooth profile whose modules are 3mm and 4mm respectively are measured in the paper.
基金Supported by National High Technology Research and Development Program of China("863" Program)(2011AA041002)
文摘In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for piecewise compensating correction was proposed. According to the mechanical structure of LVDT, the output equation was calculated, and then the theoretic nonlinear source of output was analyzed. By the proposed line-element adaptive segmentation method, the nonlinear output of LVDT was divided into linear and nonlinear regions with a given threshold. Then the com- pensating correction function was designed for nonlinear parts employing polynomial regression tech- nique. The simulation of LVDT validates the feasibility of proposed scheme, and the results of cali- bration and testing experiments fully prove that the proposed method has higher accuracy than the state-of-art correction algorithms.
