Integrated Sliding Mode Velocity Control of Linear Permanent Magnet Synchronous Motor with Thrust Ripple Compensation

In this paper,a compound sliding mode velocity control scheme with a new exponential reaching law(NERL)with thrust ripple observation strategy is proposed to obtain a high performance velocity loop of the linear permanent magnet synchronous motor(LPMSM)control system.A sliding mode velocity controller based on NERL is firstly discussed to restrain chattering of the conventional exponential reaching law(CERL).Furthermore,the unavoidable thrust ripple caused by the special structure of linear motor will bring about velocity fluctuation and reduced control performance.Thus,a thrust ripple compensation strategy on the basis of extend Kalman filter(EKF)theory is proposed.The estimated thrust ripple will be introduced into the sliding mode velocity controller to optimize the control accuracy and robustness.The effectiveness of the proposal is validated with experimental results.

Comparative Analysis of Bilateral Permanent Magnet Linear Synchronous Motors With Different Structures

Permanent magnet linear synchronous motor(PMLSM)has the advantages of high thrust density and good control accuracy,which can be applied in high-power and high-speed occasions.In this paper,the analytical models are established to obtain the electromagnetic performance for the PMLSMs with dual secondaries and dual primaries.The air-gap flux density and the electromagnetic thrust are also obtained by the finite element model to verify theoretical analysis.Besides,an improved structure is also put forward in order to suppress the thrust fluctuation of the PMLSM.Finally,the advantages and disadvantages of two PMLSMs topologies are listed.These analyses would provide a guide for the design of PMLSMs applied in high-power and high-speed occasions.

Electromagnetic Analysis and Optimization of High-speed Maglev Linear Synchronous Motor Based on Field-circuit Coupling

High speed maglev train has become a new non-contact transportation mode mainly studied in recent years because of its non-sticking and high speed characteristics.Firstly,the finite element model of the long stator linear synchronous motor(LSM)is established based on the structure of the test prototype.After calculation,it is compared with the experimental data and verified.On this basis,a field-circuit coupling model based on inverter circuit is established,and the influence of carrier wave ratio change on the output characteristics of LSM is calculated and analyzed.Finally,the filter circuit is introduced into the field-circuit coupling model,and the influence of the filter circuit on the output characteristics of the LSM is compared and analyzed.

Three-dimensional Electromagnetic Characteristics Analysis of Novel Linear Synchronous Motor under Lateral and Yaw Conditions of MAGLEV

Dynamic stability analysis of superconducting electro-dynamic maglev train under lateral and yawing motion condition is the key research content.The novel three-dimensional electromagnetic model of integrated linear synchronous motor in electro-dynamic maglev train with yawing operation condition is proposed,which can not only simultaneously achieve the propulsion,levitation and guidance performances of maglev vehicle,but also analyze the dynamic stability performance of train with yawing condition.The three-dimensional analytical method is introduced for analyzing the electromagnetic force characteristics of the linear synchronous motor with the yawing operation condition.Firstly,the topology structure and operation principle of the linear synchronous motor with yawing attitude are proposed.Secondly,the three-dimensional analytical model and expressions of electromagnetic characteristics are obtained by equivalent circuit method and Fourier decomposition method,such as levitation force,guidance force,propulsion force and yawing torque,etc.Finally,the three-dimensional electromagnetic characteristics of the linear synchronous motor are calculated under yawing operation conditions of maglev train,and the correctness of the analytical theory is verified by the finite element analysis and measured data on the test line.

Magnetic field and performance analysis of a tubular permanent magnet linear synchronous motor applied in elevator door system

A novel elevator door driven by tubular permanent magnet linear synchronous motor (TPMLSM) is presented. This TPMLSM applies axial magnet array topology of the secondary rod, air-cored armature windings and slotless structure of the forcer to improve the stability of the thrust. The influence of two major dimensions, the pitch and radius of the permanent magnet (PM), on magnetic field was studied and the best values were given by the finite element analysis (FEA). The magnetic field, back EMF and thrust of the motor were analyzed and the PM size was optimized to reduce the harmonic components of the magnetic field and improve the performance of the motor. Predicted results are validated by the experiment. It is shown that the performance of the motor and the novel elevator door system is satisfying.

Study on three dimensional electromagnetic model for permanent magnet linear synchronous motor

In this paper, with the non-salient pole permanent magnet linear synchronous motor (PMLSM)being cited, by using Fourier transform method and "slot-by-slot", "pole -by-pole" current approach, a 3D electromagnetic field model of PMLSM is established. Special attention is paid to its structure and the influence of longitudinal and transverse end effect. The distribution of electromagnetic field of PMLSM can be obtained directly and promptly by using FFT algorithm. It can also be used for the analysis of other LSM.

Optimal design of auxiliary-teeth to solve circulation current reduction of permanent magnet linear synchronous motor

A discontinuity of magnetic circuits according to the end effect is generated in the permanent magnet linear synchronous motor (PMLSM).Due to the unbalanced back electro-motive force (EMF) and impedance produced,unbalanced current is generated.The circulating current,which is caused by a decrease in the thrust,is generated by the unbalanced current.The optimal design of auxiliary-teeth at the end of the mover was carried out to solve the unbalance of phase by using design of experiment (DOE),and compared with the basic model through finite element analysis (FEA).As a result,the auxiliary-teeth model compensates for the decrease of thrust caused by the unbalanced phase.Also,this model is proven to reduce the detent force by the vibration and noise of the PMLSM and copper loss caused by the circulating current.

A Permanent Magnet Linear Synchronous Motor Drive for HTS Maglev Transportation Systems

A permanent magnet linear synchronous motor （PMLSM） for a high temperature superconducting （HTS） maglev system has been studied, including the motor structure, control strategy, and analysis techniques. Finite element analysis （FEA） of magnetic field is conducted to accurately calculate major motor parameters. Equivalent electrical circuit is used to predict the drive＇s steady-state characteristics, and a phase variable model is applied to predict the dynamic performance. Preliminary experiment with a prototype has been made to verify the theoretical analysis and the HTS-PM synchronous driving technology.

Development of High-Thrust and Double-Sided Linear Synchronous Motor Module For Liquid Crystal Display Equipment

Recently,there is an increasing requirement for controlling linear motion up to a few hundred of millimeter strokes in the area of the liquid crystal display(LCD) production equipment.The requirements of the motion system for LCD production equipment are high acceleration and high velocity with positioning accuracy.To satisfy these requirements,it has to be designed with the high-thrust force and low velocity ripple.In this work, high-thrust and double-sided linear synchronous motor (LSM)module is proposed and the developed high-thrust and double-sided LSM module is verified by performance test.

Characteristics of permanent magnet linear synchronous motor fed by spwm inverter based on field-circuit coupled method

Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter.In air-gap field where the direction or magnitude of the field is changing rapidly,the smallest elements are demanded due to high accuracy to use adaptive meshing technique.The co-simulation was used with the status space functions and time-step finite element functions,in which time-step of the status space functions was the smallest than finite element functions'.The magnitude relation of the normal elec- tromagnetic force and tangential electromagnetic force and the period were attained,and current curve was very abrupt at current zero area due to the bigger resistance and leak- age reactance,including main characteristics of motor voltage and velocity.The simulation results compare triumphantly with the experiments results.

A Study on the Dynamic Behavior of Wheel-Type Train Propelled by Superconducting Linear Synchronous Motor

This paper deals with a study on the dynamic behavior of 600 km/h wheel-type train propelled by superconducting linear synchronous motor (LSM). This train is of a traditional wheel-on-rail type with traction motors on wheel-bogies. However, for the 600 km/h speed, on the both sides of each vehicle, superconducting LSMs are attached and the ground coils are installed on the guideway. In this case, the guideway irregularities act as disturbance to the vehicle causing deterioration of ride comfort. And besides thrust force, the normal force could be created in superconducting LSM control, which influences vehicle dynamics during running. In this study, to examine the effect of guideway irregularity and normal force on dynamic behavior of proposed train, the vehicle dynamic model is driven and frequency analysis is performed through simulation. The simulation results show that the lateral directional acceleration is mainly influential to ride comfort;however this could be reduced effectively by electromagnetic damping force from linear generator. It is also shown that the normal force effect from superconducting LSM control is limited even though the attractive normal force acts favorably to ride comfort.

Temperature Rise Calculation and Velocity Planning of Permanent Magnet Linear Synchronous Motor under Trapezoidal Speed

For permanent magnet linear synchronous motor(PMLSM) working at trapezoidal speed for long time, high thrust brings high temperature rise, while low thrust limits dynamic performance. Thus, it is crucial to find a balance between temperature rise and dynamic performance. In this paper, a velocity planning model of the PMLSM at trapezoidal speed based on electromagnetic-fluid-thermal(EFT) field is proposed to obtain the optimal dynamic performance under temperature limitation. In this model, the winding loss is calculated considering the acceleration and deceleration time. The loss model is indirectly verified by the temperature rise experiment of an annular winding sample. The actual working conditions of the PMLSM are simulated by dynamic grid technology to research the influence of acceleration and deceleration on fluid flow in the air gap, and the variation rule of the thermal boundary condition is analyzed. Combined with the above conditions, the temperature rise of a coreless PMLSM(CPMLSM) under the rated working condition is calculated and analyzed in detail. Through this method and several iterations, the optimal dynamic performance under the temperature limitation is achieved. The result is verified by a comparison between simulation and prototype tests, which can help improve the dynamic performance.

Calculation of optimal current density of double side permanent magnet linear synchronous motor

The use of design method considering a coil temperature to maximize the thrust density of a double side coreless permanent magnet linear synchronous motor(PMLSM) was presented.The optimal current density where the coil temperature reaches an allowable temperature with heat analysis was applied to a magnetic circuit design.Changing optimal current density is verified whenever the design parameters of the motor are altered.The design parameters of the motor were applied to thrust calculation.In this way,the optimal model,which is a reversal of the existing design method,is deduced.The results were compared with the experimental data to verify their validity.When the convection heat transfer coefficient is applied to other models,the results of the analysis and test values show good concordance.The method proposed has some limitations.

SIMULATION RESEARCH ON CHARACTERISTICS OFPERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR

In this paper, a simulation model of Permanent Magnet Linear Synchronous Motor (PMLSM) is established by using phase equations method. Special attention is paid to its structure and the influence of longitudinal end effect and the unbalance of current. The analytic method can be used for the analysis of dynamic and static characteristics of PMLSM.

基于比例谐振内模扩张状态观测器的PMLSM推力波动抑制策略

定位力是永磁同步直线电机(PMLSM)产生推力波动的主要原因,导致振动和噪声,恶化驱动系统运行性能。针对这一问题,该文提出一种基于比例谐振内模扩张状态观测器(PR-IMESO)的PMLSM推力波动抑制策略以提高系统控制精度和运行性能。首先,对PMLSM推力波动进行建模与分析,针对推力波动中占比较大的定位力分量,根据内模原理研究考虑定位力模型的内模扩张状态观测器(IMESO),并在观测器中引入谐振项以加强对二次脉动定位力的抑制。所提出抑制策略对PMLSM定位力具有良好的观测及补偿能力,还可对其余未建模的复杂动子推力波动进行抑制,具有较好的推力波动整体抑制效果。最后,在一台750 W的PMLSM实验平台上验证所提出抑制策略的有效性。

基于改进分数阶滑模控制的PMLSM直接推力控制

针对分数阶滑模控制在永磁直线同步电机(Permanent Magnet Linear Synchronous Motor, PMLSM)直接推力控制下转速环精度不高、磁链和推力波动大等问题,提出一种改进的分数阶滑模控制算法,即分数阶双幂次指数趋近律、分数阶变速趋近律相结合的组合趋近律,能有效减弱滑模控制引起的系统振荡,加快趋近速率。仿真结果表明:与分数阶滑模控制相比,在PMLSM直接推力控制系统中采取改进分数阶滑模控制,磁链和推力波动明显减弱,系统响应速度加快,提高了PMLSM推力响应的抗干扰能力。

基于扰动观测器和改进自适应二阶快速终端滑模的PMLSM伺服系统控制

针对永磁直线同步电动机(PMLSM)在运行时易受到摩擦力、负载扰动及环境变化等不确定影响,设计一种基于扰动观测器和自适应二阶快速终端滑模控制方法。首先,该方法在高阶滑模的基础上结合了快速终端滑模控制,有效加快了系统响应速度。其次,在二阶滑模面的基础上引入条件积分项,该项仅作用于边界层内部,能够有效避免滑模到达阶段由于积分饱和现象导致的超调量过大及响应时间过慢的问题。此外,设计自适应切换控制律,使切换增益在合理的区间内,并根据系统状态进行实时更新,从而削弱抖振现象。最后,为进一步提升系统的鲁棒性,采用扰动观测器对PMLSM系统的集总不确定性进行补偿。经实验验证,该控制方法具有良好的位置跟踪精度和强鲁棒性,且对系统抖振现象有明显削弱作用。

Impulsive control for permanent magnet synchronous motors with uncertainties:LMI approach

A permanent magnet synchronous motor （PMSM） may have chaotic behaviours under certain working conditions, especially for uncertain values of parameters, which threatens the security and stability of motor-driven operation. Hence, it is important to study methods of controlling or suppressing chaos in PMSMs. In this paper, the stability of a PMSM with parameter uncertainties is investigated. After uncertain matrices which represent the variable system parameters are formulated through matrix analysis, a novel asymptotical stability criterion is established by employing the method of Lyapunov functions and linear matrix inequality technology. An example is also given to illustrate the effectiveness of our results.