Correlation between the magic wavelengths and the polarization direction of the linearly polarized laser in the Ca^+ optical clock

The magic wavelengths for different Zeeman components are measured based on the ^40Ca^＋ optical clock. The dynamic dipole polarizability of a non-zero angular moment level has correlation with the polarization direction of the linearly polarized laser beam, and we show that the four hyperfine structure levels of 4S1/2,m=±1/2 and 3d5/2,m=±1/2 for ^40Ca^＋ have the same dynamic dipole polarizability at the magic wavelength and a certain polarization direction. In addition, the existence of a specific direction of polarization may provide a new idea for improving the precision of magic wavelength measurement in experiment.

Linearly Polarized Polarization-Maintaining Er^(3+)-Doped Fluoride Fiber Laser in the Mid-Infrared

We demonstrated the~2.8-μm and~3.5-μm linearly polarized continuous wave(CW)laser outputs from a polarization-maintaining(PM)Er^(3+)-doped fluoride fiber laser.By introducing a film polarizer into the cavity to select the laser polarization orientation,the~2.8-μm linearly polarized CW laser with a high polarization extinction ratio(PER)of~23 dB and maximum output power of 2.37 W was achieved under double-end pumping at 976 nm.By adding another 1981-nm pump source simultaneously,the~3.5-μm linearly polarized CW laser was also obtained,giving higher PER of~27 dB and maximum output power of 307 mW which is only limited by the available power of 1981-nm pump.To the best of our knowledge,this is the first report on a mid-infrared linearly polarized CW PM fiber laser in the>2.5-μm mid-infrared region.This work not only opens up opportunities for some new mid-infrared applications,but also provides a promising platform for developing high-stability and versatile mid-infrared laser sources.

High-power all-fiber linearly polarized Yb-doped chirped pulse amplifier based on active polarization control

High-power ultrafast laser amplification based on a non-polarization maintaining fiber chirped pulse amplifier is demonstrated.The active polarization control technology based on the root-mean-square propagation(RMS-prop)algorithm is employed to guarantee a linearly polarized output from the system.A maximum output power of 402.3 W at a repetition rate of 80 MHz is realized with a polarization extinction ratio(PER)of>11.4 dB.In addition,the reliable operation of the system is verified by examining the stability and noise properties of the amplified laser.The M2factor of the laser beam at the highest output power is measured to be less than 1.15,indicating a diffraction-limited beam quality.Finally,the amplified laser pulse is temporally compressed to 755 fs with a highest average power of 273.8 W.This is the first time,to the best of our knowledge,that the active polarization control technology was introduced into the high-power ultrafast fiber amplifier.

A Single-Frequency Linearly Polarized Fiber Laser Using a Newly Developed Heavily Tm3+-Doped Germanate Glass Fiber at 1.95 μm

A compact linearly polarized, low-noise, narrow-linewidth, single-frequency fiber laser at 1950nm is demonstrated. This compact fiber laser is based on a 21-mm-long homemade Tm3＋-doped germanate glass fiber. Over 100-mW stable continuous-wave single transverse and longitudinal mode lasing at 195Ohm are achieved. The measured relative intensity noise is less than -135dB/Hz at frequencies over 5 MHz. The signal-to-noise ratio of the laser is larger than 72dB, and the laser linewidth is less than 6kHz, while the obtained linear polarization extinction ratio is higher than 22 dB.

All-fiber linearly polarized laser oscillator by fiber coiling loss control

In this paper,we demonstrate an all-fiber linearly polarized fiber laser oscillator.The single polarization of the oscillator is achieved through the careful designing of the active fiber coiling.The relationship between fiber coiling diameter and polarization extinction ratio and optical efficiency is studied,whose results lead to an optimized system.The thermal management of the oscillator is also refined,which allows the oscillator to reach a maximum output power of44.1 W with an optical-to-optical efficiency of 57.9%.A high average polarization extinction ratio of 21.6 d B is achieved during a 2-hour stability test.The oscillator also owns a narrow 3-d B bandwidth of 0.1 nm,as well as near-diffraction-limit beam quality of M^2～ 1.14.

High-power linearly-polarized tunable Raman fiber laser

In this study, we demonstrate an all-fiber high-power linearly-polarized tunable Raman fiber laser system. An in- house high-power tunable fiber laser was employed as the pump source. A fiber loop mirror （FLM） serving as a high reflectivity mirror and a flat-cut endface serving as an output coupler were adopted to provide broadband feedback. A piece of 59-m commercial passive fiber was used as the Raman gain medium. The Raman laser had a 27.6 nm tuning range from 1112 nm to 1139.6 nm and a maximum output power of 125.3 W, which corresponds to a conversion efficiency of 79.4%. The polarization extinction ratio （PER） at all operational wavelengths was measured to be over 21 dB. To the best of our knowledge, this is the first report on a hundred-watt level linearly-polarized tunable Raman fiber laser.

A planar chiral nanostructure with asymmetric transmission of linearly polarized wave and huge optical activity in near-infrared band

Just like an electronic diode that allows the electrical current to flow in one direction only, a kind of chiral metamaterial structure with a similar functionality for the electromagnetic wave is proposed. The designed nanostructure that consists of twisted metallic split-ring resonators on both sides of a dielectric substrate achieves asymmetric transmission for a forward and backward propagating linearly polarized wave by numerical simulation in near-infrared band. Difference in transmission efficiency of the optimized structure between the same polarized waves incident from opposite directions can reach a maximum at the communication wavelength （1.55 μm）. Moreover, the simulation results of this structure also exhibit strong optical activity and circular dichroism.

Field-free orientation of diatomic molecule via the linearly polarized resonant pulses

We propose a scheme to coherently control the field-free orientation of NO molecule whose rotational temperature is above 0 K. It is found that the maximum molecular orientation is affected by two factors： one is the sum of the population of M = 0 rotational states and the other is their distribution, however, their distribution plays a much more significant role in molecular orientation than the sum of their population. By adopting a series of linearly polarized pulses resonant with the rotational states, the distribution of M = 0 rotational states is well rearranged. Though the number of pulses used is small, a relatively high orientation degree can be obtained. This scheme provides a promising approach to the achievement of a good orientation effect.

Generation of elliptical isolated attosecond pulse from oriented H_(2)^(+)in a linearly polarized laser field

We investigate the ellipticity of the high-order harmonic generation from the oriented H_(2)^(+)exposed to a linearly polarized laser field by numerically solving the two-dimensional time-dependent Schrodinger equation(2 D TDSE).Numerical simulations show that the harmonic ellipticity is remarkably sensitive to the alignment angle.The harmonic spectrum is highly elliptically polarized at a specific alignment angleθ=30°,which is insensitive to the variation of the laser parameters.The position of the harmonic intensity minima indicates the high ellipticity,which can be attributed to the two-center interference effect.The high ellipticity can be explained by the phase difference of the harmonics.This result facilitates the synthesis of a highly elliptical isolated attosecond pulse with duration down to 65 as,which can be served as a powerful tool to explore the ultrafast dynamics of molecules and study chiral light-matter interaction.

A Linearly Polarized Ho:YAG Laser at 2.09 μm with Corner Cube Cavity Pumped by Tm:YLF Laser

A linearly polarized operation Ho： YAG laser at 2090.5 nm with a corner cube cavity is demonstrated. A polarizer with high reflectivity for the s-polarized light at the laser wavelength is employed to achieve a linearly polarized laser. In the same case of resonator length, the corner cube can be used to cut the volume of the Ho：YAG laser and to enhance the stability of the system. The maximum linearly polarized output power of 5.8 W is achieved at the absorbed pump power of 23.3 W, corresponding to a slope efficiency of 29.7%, and the optical-optical conversion efficiency is around 24.9%. The M2 factors of the 2.09μm laser are 2.4 and 1.2 along the horizontal and vertical directions, respectively.

Dynamic study of compressed electron layer driven by linearly polarized laser

The dynamics of the compressed electron layer（CEL） are investigated when a linearly polarized（LP） laser pulse irradiates a plasma target. The turbulent motion of the CEL is investigated by a simple model, which is verified by particlein-cell（PIC） simulations. It is found that the compressed layer disperses in a few cycles of the laser duration, because the CEL comes back with a large velocity in the opposite direction of the laser incident. A larger wavelength laser can be used to tailor the proton beam by reducing the turbulence of the CEL in the region of the LP laser acceleration.

Faraday Angle of Linearly Polarized Waves Along Magnetic Field in Magnetized Collisional Plasmas

In magnetized collisional plasmas, owing to the differences between attenuations of left- and right-handed polarized waves, the Faraday rotation angle differs from that in collision- aless plasmas. In this paper, the attenuation rates of left- and right-handed polarized waves are analyzed, and the Faraday angle is expressed by the real and imaginary parts of refractive index of the magnetized plasma, with clear physics meaning. Furthermore, the dependence of Faraday angle on collision frequency is calculated and discussed.

A novel orthogonally linearly polarized Nd:YVO_4 laser

We presented a novel orthogonally linearly polarized Nd：YVO4 laser. Two pieces of a-cut grown-together composite YVO4/Nd：YVO4 crystals were placed in the resonant cavity with the c-axis of the two crystals orthogonally. The polarization and power performance of the orthogonally polarized laser were investigated. A 26.2-W orthogonally linearly polarized laser was obtained. The power ratio between the two orthogonally polarized lasers was varied with the pump power caused by the polarized mode coupling. The longitudinal modes competition and the corresponding variable optical beats were also observed from the orthogonally polarized laser. We also adjusted the crystals with their c-axis parallele to each other, and a 40.7-W linearly polarized TEM00 laser was obtained, and the beam quality factors were Mx^2 = 1.37 and My^2 = 1.25.

High Efficiency Asymmetric Transmission of Linearly Polarized Waves through a Three-Layered Chiral Metamaterial

In this paper, we propose a three-layered chiral metamaterial (CMM) that exhibits an asymmetric transmission effect for linearly polarized waves along forwardly and backwardly propagating in the microwave region, which not only realizes the asymmetric transmission effect of multi-frequency points for linearly polarized wave in microwave band, but also breaks through the limitation of single transformation from linear polarization to linear polarization. Numerical simulation results indicate that incident wave for linearly polarized waves will be converted and transmitted as a circularly polarized wave along the forward direction at 8.31 GHz. Moreover, the asymmetric transmission (AT) parameter Δ achieves 0.8 around 12 GHz, proving the existence of strong polarization conversion and diode-like function. The proposed CMM shows great potential applications in high performance linear polarization convertor and isolator in microwave frequency.

Peculiar influence of linearly polarized spectrum illumination patterns on the sensitivity characteristics of locust response to polarized light

This study investigated the influence of different linearly polarized spectrum lights on locusts polartactic response characteristics linearly polarized vector sensitivity mode and polartactic response by using linearly polarized spectrum vector light module and experimental device.The objective was to clarify the vector sensitivity characteristics and functional effect of linearly polarized light spectrum intensity on locusts polartactic response,determine the influence specificity of linearly polarized spectrum illumination properties on locusts polarization-related behavior.When spectrum and illumination were constant,locusts polartactic response,presenting the response feature of sine and cosine function change specificity,was related to spectrum attribute.The visual acuity effect stimulated by violet spectrum was the best,whereas the optical distance modulation effect induced by orange spectrum was the strongest.When illumination was enhanced,locusts vector sensitivity mode shifted to present the specific sensitivity prompted by light intensity at long distance and inhibited by light intensity at short distance.Moreover,the regulating function of violet spectrum was the strongest,and the regulatory mutation effect of orange spectrum was the least significant.Simultaneously,locusts polartactic sensitivity to 300°vector at 100 lx,whereas to 240°vector at 1000 lx of linearly polarized violet light was the strongest.Locusts polartactic aggregation and visual tendency sensitivity to 90°vector at 100 lx,whereas to 270°vector at 1000 lx of linearly polarized violet light was the strongest.The heterogeneous regulation function of different linearly polarized spectrum couplings with light intensity led to significant variations in locusts vector sensitivity mode.This was derived from the antagonistic and specific tuning characteristics of locusts polartactic vision,reflecting the integrated output effect of locusts vector dependence regulated by linearly polarized spectrum intensity attribute.The findings were significant for the construction of pest polarization induction light sources and the investigation of the sensitive physiology pathway of locusts polarization vision.

Influences of DRA and non-DRA vision on the visual responses of locusts stimulated by linearly polarized and unpolarized lights

Locust and grasshopper plagues pose a serious threat to crop production in many areas worldwide.However,there is a lack of effective,quick-acting methods to control such outbreaks.Methods exploiting the phototactic response of these insects are receiving increasing attention.The current study investigated the effect of linearly polarized and unpolarized light on locust phototactic and polarotactic responses,in particular the function of their dorsal rim area(DRA)and non-DRA visual fields.The results showed that the polarotactic function weight of DRA vision was stimulated by linearly polarized ultraviolet(UV)and violet light,the phototactic function weight was induced by blue,green,and orange light,and under linearly polarized light,the functional effect of DRA vision was strongest in response to linearly polarized violet light.Moreover,the locust visual response effect was related to spectral light attributes,with the linear polarization effect intensifying in response to the short-range vision sensitivity of non-DRA visual fields,whereas DRA vision regulated the short-range sensitivity of compound eye vision.When illumination increased,the synergistic enhancement effects of linearly polarized ultraviolet and violet light were significant,whereas the visual sensitivity was restricted significantly by linearly polarized blue,green,or orange light.Thus,non-DRA vision determined,while DRA vision enhanced,the phototactic response sensitivity,whereas,in linearly polarized UV or violet light,non-DRA vision determined,while DRA vision enhanced,the visual trend and polarotaxic aggregation sensitivity,with opposite effects in linearly polarized blue,green,or orange light.When illumination increased,there was a driving effect caused by linearly polarized violet light on non-DRA vision,whereas at short-wave lengths,the control effect induced by linearly polarized orange light was optimal;however,the photo-induced effect of linearly polarized violet light and the visual distance control effect of linearly polarized orange light were optimal.These results provide theoretical support for the photo-induced mechanism of the locust visual response effect and for the development of linearly polarized light sources for the environmentally friendly prevention and control of locust populations.

UV-Polarizing Linear Polyyne Molecules Aligned in PVA

Electronic absorption bands of conjugated linear carbon chain molecules, namely polyynes H(C≡C)nH (n=5-7), are exploited to devise light-polarizing films applicable to the UV. Laser ablated polyynes are separated in size and dispersed in a film of polyvinyl alcohol (PVA), which is stretched to align the trapped linear polyyne molecules inside. As a nature of the structural anisotropy, transition dipole of the UV absorption for polyyne molecules is in parallel with the molecular axis and the absorption occurs only for the electromagnetic wave having the amplitude of its electric vector along the molecular axis. Aligned and fixed orientationally in the solid PVA film, polyyne molecules act as selective absorbers of one of the polarization components of incident light at particular wavelength. Using a light source of linearly polarized UV light, whose direction of polarization is rotatable, angular dependence of the absorption intensity is investigated for the stretched PVA film containing aligned polyyne molecules and analyzed in terms of an order parameter in the theory of linear dichroism.

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY(p-PHENYLENEVINYLENE)

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.

Light-modulated electron retroreflection and Klein tunneling in a graphene-based n-p-n junction

We investigate the electron retroreflection and the Klein tunneling across a graphene-based n-p-n junction irradiated by linearly polarized off-resonant light with the polarization along the x direction.The linearly polarized off-resonant light modifies the band structure of graphene,which leads to the anisotropy of band structure.By adjusting the linearly polarized light and the direction of n-p-n junction simultaneously,the electron retroreflection appears and the anomalous Klein tunneling,the perfect transmission at a nonzero incident angle regardless of the width and height of potential barrier,happens,which arises from the fact that the light-induced anisotropic band structure changes the relation of wavevector and velocity of electron.Our finding provides an alternative and flexible method to modulate electron retroreflection and Klein tunneling.

Cinnamate-functionalized hyperbranched polymer as liquid crystal photo-alignment layer

In this work, 4-methoxylcinnamoyl chloride was reacted with a commercial hyperbranched polymer （Boltom-TM H30） to prepare a hyperbranched photosensitive polymer （H30-Ci）. The polymer was characterized by UV absorption spectrum and 1H- NMR spectrum. After processed by Linearly Polarized Polymerization （LPP） method, the spin-coated films of H30-Ci were used as photo-alignment layers to assemble liquid crystal （LC） cells containing nematic liquid crystal （5CB）. The observation by polarized microscope showed that the H30-Ci blended with a linear polymer （BP-AN-Ci） photo-alignment layers could align LC molecules in a very uniform way.