Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This pap...Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This paper proposes a forward link partial-balance power control algorithm, which can provide necessary Quality of Service (QoS) for multimedia traffics in Wideband CDMA(W-CDMA) systems. The proposed algorithm is the integration of grading traffics priority and allocating and adjusting forward link power levels. For higher priority traffics, the unbalance power control is used. Whereas for lower priority traffics, balance power control is adopted. Computer simulation results show that the proposed algorithm can guarantee the special QoS requirements of the traffics with higher priority orders and maximize the CIR of the traffics with lower priority orders.展开更多
This paper has proposed a new methodology extracting stability classes of field association words depending on automatically power link analysis to enhance the precision of decision tree. In this paper, we have studie...This paper has proposed a new methodology extracting stability classes of field association words depending on automatically power link analysis to enhance the precision of decision tree. In this paper, we have studied the effects of the time variation based on the frequencies of specific words called field association words that connected to documents using power link in a specific period. The stability classes have referred to the popularity of field association words based on the change of time in a given period. The new approach has evaluated by conducting experiments simulating results of 1575 files (about 5.16 MB). Based on these experiments, it has turned out that, the F-measure for ascending, stable and descending classes have achieved 93.6%, 99.8% and 75.7%, respectively. These results mean that F-measure was increasing by 12%, 4% and 34% than traditional methods because of the power link analysis.展开更多
介绍了一种基于AC-link技术的并联谐振高压电源的拓扑电路,该结构结合准谐振的工作模式能够实现高功率因数和高效率;采用了基于状态平面图对并联谐振电路的分析方法,该方法相比传统的基波等效分析法具有求解简单、直观、精确和负载适用...介绍了一种基于AC-link技术的并联谐振高压电源的拓扑电路,该结构结合准谐振的工作模式能够实现高功率因数和高效率;采用了基于状态平面图对并联谐振电路的分析方法,该方法相比传统的基波等效分析法具有求解简单、直观、精确和负载适用范围大的特点,并给出了相应推导过程;给出了输出电压为25 k V,电流为1 A的变换器的分析和谐振参数设计。最后进行了仿真,仿真结果表明,基于高频交流链接并联谐振拓扑和基于状态平面图法的控制能够稳定输出电压(<1%),实现零电流开关,三相输入电流谐波较低(THD<12.5%)与三相电压基本同相位,功率因数为0.99。展开更多
文摘Balance power control is based on the idea of balancing Carrier to Interference Ratio (CIR) of all wireless links. Unbalance power control means that different traffics can achieve different CIR at receivers. This paper proposes a forward link partial-balance power control algorithm, which can provide necessary Quality of Service (QoS) for multimedia traffics in Wideband CDMA(W-CDMA) systems. The proposed algorithm is the integration of grading traffics priority and allocating and adjusting forward link power levels. For higher priority traffics, the unbalance power control is used. Whereas for lower priority traffics, balance power control is adopted. Computer simulation results show that the proposed algorithm can guarantee the special QoS requirements of the traffics with higher priority orders and maximize the CIR of the traffics with lower priority orders.
文摘This paper has proposed a new methodology extracting stability classes of field association words depending on automatically power link analysis to enhance the precision of decision tree. In this paper, we have studied the effects of the time variation based on the frequencies of specific words called field association words that connected to documents using power link in a specific period. The stability classes have referred to the popularity of field association words based on the change of time in a given period. The new approach has evaluated by conducting experiments simulating results of 1575 files (about 5.16 MB). Based on these experiments, it has turned out that, the F-measure for ascending, stable and descending classes have achieved 93.6%, 99.8% and 75.7%, respectively. These results mean that F-measure was increasing by 12%, 4% and 34% than traditional methods because of the power link analysis.
文摘介绍了一种基于AC-link技术的并联谐振高压电源的拓扑电路,该结构结合准谐振的工作模式能够实现高功率因数和高效率;采用了基于状态平面图对并联谐振电路的分析方法,该方法相比传统的基波等效分析法具有求解简单、直观、精确和负载适用范围大的特点,并给出了相应推导过程;给出了输出电压为25 k V,电流为1 A的变换器的分析和谐振参数设计。最后进行了仿真,仿真结果表明,基于高频交流链接并联谐振拓扑和基于状态平面图法的控制能够稳定输出电压(<1%),实现零电流开关,三相输入电流谐波较低(THD<12.5%)与三相电压基本同相位,功率因数为0.99。
