Based on finite-deformation elastoplastic theory, a scheme to solve the structural problems of the lap link by using ANSYS is proposed. The analysis results show that the maximum deformation exists at the loading spot...Based on finite-deformation elastoplastic theory, a scheme to solve the structural problems of the lap link by using ANSYS is proposed. The analysis results show that the maximum deformation exists at the loading spot of the lateral pin and the stiffness of this area needs to be enhanced; the maximum stresses occur at the two sides adjacent to the loading spot and the intensity around this region should be strengthened;the materials at the pole and pinhole with relatively low stress are redundant and removing excessive weight is possible. Based on the analysis, corresponding improvements are tentatively made, and the simulation results prove that, the stiffness and intensity of the new structure are improved. Furthermore, the reliability and validity of this design are verified by tensile tests of two types of structure.展开更多
Linked partitions were introduced by Dykema(Dykema K J. Multilinear function series and transforms in free probability theory. Adv. Math., 2005, 208(1):351–407) in the study of the unsymmetrized T-transform in free p...Linked partitions were introduced by Dykema(Dykema K J. Multilinear function series and transforms in free probability theory. Adv. Math., 2005, 208(1):351–407) in the study of the unsymmetrized T-transform in free probability theory.Permutation is one of the most classical combinatorial structures. According to the linear representation of linked partitions, Chen et al.(Chen W Y C, Wu S Y J, Yan C H. Linked partitions and linked cycles. European J. Combin., 2008, 29(6): 1408–1426) de?ned the concept of singly covered minimal elements. Let L(n, k) denote the set of linked partitions of [n] with k singly covered minimal elements and let P(n, k) denote the set of permutations of [n] with k cycles. In this paper, we mainly establish two bijections between L(n, k) and P(n, k). The two bijections from a different perspective show the one-to-one correspondence between the singly covered minimal elements in L(n, k) and the cycles in P(n, k).展开更多
Non-linear finite element models accounting for large displacements have been used to investigate the behavior of steel built-up shear links that had previously been tested using large-scale experiments. The links wer...Non-linear finite element models accounting for large displacements have been used to investigate the behavior of steel built-up shear links that had previously been tested using large-scale experiments. The links were designed using steel grades with yield points ranging from high to low strengths. The objectives of the numerical analyses were to further investigate the non-linear behavior and to correlate the numerical results with experimental observations. Elasto-plastic as well as cyclic stress-strain material properties were incorporated to study the influence of material behavior on the overall shear link response. Non-linear monotonie analyses of the shear links incorporating the cyclic stress-strain steel properties resulted in similar trends in the response as the backbone curves recorded from the physical experiments. The numerical models of built-up shear links utilizing structural grade steels closely correlated to the experimentally recorded shear strength. Models utilizing low yield point steels overestimated the shear strength, which was caused by the characteristics of cyclic behavior of those steels. The detailed numerical models also allowed for investigation of the plastic strain demands on the different components of the link. It was shown that finite element models combined with appropriate stress-strain relationship may be used with confidence to check the design of shear links of different steel grades and sectional geometries.展开更多
In comparing reference unification to reference linking,the authors found that reference linking yield similar result as that of reference unification.An investigative study was conducted by these authors at Chinese S...In comparing reference unification to reference linking,the authors found that reference linking yield similar result as that of reference unification.An investigative study was conducted by these authors at Chinese Science Citation Database(CSCD)of National Science Library(NSL)of the ChineseAcademy of Sciences(CAS),it was found that there were three inhibiting elements in invoking a reference unification solution and the same is true for a reference linking solution.Firstly,it was difficult to define a minimum set of data elements for matching.Secondly,it had a problem of data inaccuracy and/or data incompleteness.Thirdly,it was hard to determine an appropriate linking result that produced the desired document for the user.Thus these authors suggest that getting Digital Object Identifier(DOI)for each journal article is a good way to bring about reference unification and also to improve metadata quality simultaneously at the same time.Therefore,DOI has a pivotal role to play in terms of bringing about reference unification and/or a reference linking.展开更多
A polymeric gel is an aggregate of polymers and solvent molecules, which can retain its shape after a large deformation. The deformation behavior of polymeric gels was often described based on the Flory-Rehner free en...A polymeric gel is an aggregate of polymers and solvent molecules, which can retain its shape after a large deformation. The deformation behavior of polymeric gels was often described based on the Flory-Rehner free energy function without considering the influence of chain entanglements on the mechanical behavior of gels. In this paper,a new hybrid free energy function for gels is formulated by combining the EdwardsVilgis slip-link model and the Flory-Huggins mixing model to quantify the time-dependent concurrent process of large deformation and mass transport. The finite element method is developed to analyze examples of swelling-induced deformation. Simulation results are compared with available experimental data and show good agreement. The influence of entanglements on the time-dependent deformation behavior of gels is also demonstrated.The study of large deformation kinetics of polymeric gel is useful for diverse applications.展开更多
Agrammatism is a case of a more general linguistic impairment known as Broca's aphasia.For recent studies just qualitatively analyzed the similarities between time reference and pronominal elements and no experime...Agrammatism is a case of a more general linguistic impairment known as Broca's aphasia.For recent studies just qualitatively analyzed the similarities between time reference and pronominal elements and no experiment have been done.In this paper,the author first introduced the previous studies on time reference and pronominal elements,then designed an experiment to quantitatively test the similarities between them from the aspect of discourse linking.展开更多
In this study, the design of an automatic ROM-Exercise machine that is constructed witha planar multililnk mechamsm consisting of only revolute pairs is investigated. Namely, equations thatdetermine the minimum moving...In this study, the design of an automatic ROM-Exercise machine that is constructed witha planar multililnk mechamsm consisting of only revolute pairs is investigated. Namely, equations thatdetermine the minimum moving spaces and relative positions of link required to construct the legmechanism are formulated with consideration of transform functions. For the leg mechanism that isconstructed with a planar eleven-link mechanism, arrangements of each link and optimum linkprofiles avoided mutual interferences among moving links are determined wb consideration of therelative locations of each link in the same plane during a cycle of motion of the mechanism. Based onthe above analytical results, an automatic ROM-Exercise machine that performs within a minimum moving spaces is proposed as a prachcal example. ms study is carried out as part of the students'computcr education to the graduation thesis, in order to improve their creativity and machine designtechnology skills in coniunction with educational advantages. Significam educational results areobtained by using the design techniques mentioned above.展开更多
文摘Based on finite-deformation elastoplastic theory, a scheme to solve the structural problems of the lap link by using ANSYS is proposed. The analysis results show that the maximum deformation exists at the loading spot of the lateral pin and the stiffness of this area needs to be enhanced; the maximum stresses occur at the two sides adjacent to the loading spot and the intensity around this region should be strengthened;the materials at the pole and pinhole with relatively low stress are redundant and removing excessive weight is possible. Based on the analysis, corresponding improvements are tentatively made, and the simulation results prove that, the stiffness and intensity of the new structure are improved. Furthermore, the reliability and validity of this design are verified by tensile tests of two types of structure.
基金The NSF(11601020,11501014) of China2017 Commercial Specialty Project(19005757053) of BTBU2018 Postgraduate Research Capacity Improvement Project(19008001491) of BTBU
文摘Linked partitions were introduced by Dykema(Dykema K J. Multilinear function series and transforms in free probability theory. Adv. Math., 2005, 208(1):351–407) in the study of the unsymmetrized T-transform in free probability theory.Permutation is one of the most classical combinatorial structures. According to the linear representation of linked partitions, Chen et al.(Chen W Y C, Wu S Y J, Yan C H. Linked partitions and linked cycles. European J. Combin., 2008, 29(6): 1408–1426) de?ned the concept of singly covered minimal elements. Let L(n, k) denote the set of linked partitions of [n] with k singly covered minimal elements and let P(n, k) denote the set of permutations of [n] with k cycles. In this paper, we mainly establish two bijections between L(n, k) and P(n, k). The two bijections from a different perspective show the one-to-one correspondence between the singly covered minimal elements in L(n, k) and the cycles in P(n, k).
基金the Federal Highway Administration through the Highway Project at the Multidisciplinary Center for Earthquake Engineering Researchthe toll bridge retrofit program of the California Department of Transportation through the University of California,San Diego
文摘Non-linear finite element models accounting for large displacements have been used to investigate the behavior of steel built-up shear links that had previously been tested using large-scale experiments. The links were designed using steel grades with yield points ranging from high to low strengths. The objectives of the numerical analyses were to further investigate the non-linear behavior and to correlate the numerical results with experimental observations. Elasto-plastic as well as cyclic stress-strain material properties were incorporated to study the influence of material behavior on the overall shear link response. Non-linear monotonie analyses of the shear links incorporating the cyclic stress-strain steel properties resulted in similar trends in the response as the backbone curves recorded from the physical experiments. The numerical models of built-up shear links utilizing structural grade steels closely correlated to the experimentally recorded shear strength. Models utilizing low yield point steels overestimated the shear strength, which was caused by the characteristics of cyclic behavior of those steels. The detailed numerical models also allowed for investigation of the plastic strain demands on the different components of the link. It was shown that finite element models combined with appropriate stress-strain relationship may be used with confidence to check the design of shear links of different steel grades and sectional geometries.
文摘In comparing reference unification to reference linking,the authors found that reference linking yield similar result as that of reference unification.An investigative study was conducted by these authors at Chinese Science Citation Database(CSCD)of National Science Library(NSL)of the ChineseAcademy of Sciences(CAS),it was found that there were three inhibiting elements in invoking a reference unification solution and the same is true for a reference linking solution.Firstly,it was difficult to define a minimum set of data elements for matching.Secondly,it had a problem of data inaccuracy and/or data incompleteness.Thirdly,it was hard to determine an appropriate linking result that produced the desired document for the user.Thus these authors suggest that getting Digital Object Identifier(DOI)for each journal article is a good way to bring about reference unification and also to improve metadata quality simultaneously at the same time.Therefore,DOI has a pivotal role to play in terms of bringing about reference unification and/or a reference linking.
基金Project supported by the National Natural Science Foundation of China(Nos.11272237 and11502131)the Natural Science Foundation of Fujian Province(No.2016J05019)the Foundation of the Higher Education Institutions of Fujian Education Department for Distinguished Young Scholar(No.[2016]23)
文摘A polymeric gel is an aggregate of polymers and solvent molecules, which can retain its shape after a large deformation. The deformation behavior of polymeric gels was often described based on the Flory-Rehner free energy function without considering the influence of chain entanglements on the mechanical behavior of gels. In this paper,a new hybrid free energy function for gels is formulated by combining the EdwardsVilgis slip-link model and the Flory-Huggins mixing model to quantify the time-dependent concurrent process of large deformation and mass transport. The finite element method is developed to analyze examples of swelling-induced deformation. Simulation results are compared with available experimental data and show good agreement. The influence of entanglements on the time-dependent deformation behavior of gels is also demonstrated.The study of large deformation kinetics of polymeric gel is useful for diverse applications.
文摘Agrammatism is a case of a more general linguistic impairment known as Broca's aphasia.For recent studies just qualitatively analyzed the similarities between time reference and pronominal elements and no experiment have been done.In this paper,the author first introduced the previous studies on time reference and pronominal elements,then designed an experiment to quantitatively test the similarities between them from the aspect of discourse linking.
文摘In this study, the design of an automatic ROM-Exercise machine that is constructed witha planar multililnk mechamsm consisting of only revolute pairs is investigated. Namely, equations thatdetermine the minimum moving spaces and relative positions of link required to construct the legmechanism are formulated with consideration of transform functions. For the leg mechanism that isconstructed with a planar eleven-link mechanism, arrangements of each link and optimum linkprofiles avoided mutual interferences among moving links are determined wb consideration of therelative locations of each link in the same plane during a cycle of motion of the mechanism. Based onthe above analytical results, an automatic ROM-Exercise machine that performs within a minimum moving spaces is proposed as a prachcal example. ms study is carried out as part of the students'computcr education to the graduation thesis, in order to improve their creativity and machine designtechnology skills in coniunction with educational advantages. Significam educational results areobtained by using the design techniques mentioned above.
