A magnetic biocatalyst based on mussel-inspired polydopamine and its acylation of dihydromyricetin

A support made of mussel-inspired polydopamine-coated magnetic iron oxide nanoparticles （PD-MNPs） was prepared and characterized. The widely used Aspetyillus niger lipase （ANL） was immobilized on the PD-MNPs （ANL@PD-MNPs） with a protein loading of 138 mg/g and an activity recovery of 83.6% under optimized conditions. For the immobilization, the pH and immobilization time were investigated. The pH and thermal and storage stability of the ANL@PD-MNPs significant- ly surpassed those of free ANL. The ANL@PD-MNPs had better solvent tolerance than free ANL. The secondary structure of free ANL and ANL@PD-MNPs was analyzed by infrared spectroscopy, A kinetic study demonstrated that the ANL@PD-MNPs had enhanced enzyme-substrate affinity and high catalytic efficiency. The ANL@PD-MNPs was applied as a biocatalyst for the regioselective acylation of dihydromyricetin （DMY） in DMSO and gave a conversion of 79.3%, which was higher than that of previous reports. The ANL@PD-MNPs retained over 55% of its initial activity after 10 cycles of reuse. The ANL@PD-MNPs were readily separated from the reaction system by a magnet. The PD-MNPs is an excellent support for ANL and the resulting ANL@PD-MNPs displayed good potential for the efficient synthesis of dihydromyricetin-3-acetate by enzymatic regioselective acylation.

Silica gel supported AlCl_3 catalyzed Friedel-Crafts acylation of aromatic compounds

Silica gel supported aluminium trichloride（SiO2-AlCl3） has been shown to be a mild,efficient,and chemoseiective heterogeneous Lewis acid catalyst for the acylation of aromatic compounds with acid chlorides.The catalyst can be reused up to five times after simple washing with ether and is stable（as a bench top catalyst）.

Regioselective enzymatic acylation of troxerutin in nonaqueous medium

A series of monosubstituted troxerutin esters have been synthesized by enzyme-catalyzed regioselective acylation of troxerutin in nonaqueous medium.Using divinyl dicarboxylates(CH_2=CH-OOC-(CH_2)_n-COO-CH=CH_2,n = 2,3,4,7,8,11) featuring different chain length as acyl donors and alkaline protease from Bacillus subtilis as catalyst,troxerutin was regioselective acylated at B ethoxyl group.The results indicated that the regioselectivity of the enzyme-catalyzed acylation was not affected by the chain length o...

Solventless Friedel-Crafts Acylation under Microwave Activation

A novel catalytic system, ZnCl2 supported on alumina, was found to be an efficient and readily available medium for the solvent-free Friedel-Crafts acylation reactions under microwave irradiation. Good yields and high catalytic efficiencies were observed within short reaction times. Comparing with silica gel, alumina was more efficient under the same conditions.

Lipase-Catalyzed Synthesis of Sn-2 Palmitate: A Review

Human milk fat(HMF)is an important source of nutrients and energy for infants.Triacylglycerols(TAGs)account for about 98%of HMF and have a unique molecular structure.HMF is highly enriched in palmitic acid(PA)at the sn-2 position of the glycerol backbone(more than 70%)and in unsaturated fatty acids at the sn-1,3 position.The specific TAG structure in HMF plays a valuable function in infant growth.Sn-2 palmitate(mainly 1,3-dioleoyl-2-palmitoyl-glycerol)is one of the structured TAGs that is commonly supplemented into infant formula in order to enable it to present a similar structure to HMF.In this review,the development of the lipase-catalyzed synthesis of sn-2 palmitate over the last 25 years are summarized,with a focus on reaction schemes in a laboratory setting.Particular attention is also paid to the commercialized sn-1,3 regioselective lipases that are used in structured TAGs synthesis,to general methods of TAG analysis,and to successfully developed sn-2 palmitate products on the market.Prospects for the lipase-catalyzed synthesis of sn-2 palmitate are discussed.

Acylation of Quercetin with a Novel Thermophilic Esterase as Biocatalyst

The regioselective acylation of quercetin catalyzed by a novel thermophilic esterase（APE1547） from the archaeon Aeropyrum pernix K1 was successfully conducted in organic solvents.The effects of acyl donor,substrate ratio,organic solvent,temperature,and water activity were investigated.Under the optimum conditions,a yield of 74% for its mono ester could be achieved in the reaction for about 6 h.With the reaction time extending to about 30 h,the final conversion of quercetin was about 100% and three products were synthesized.

Catalytic Acylation of Anisole over Some Zeolites

Methoxyacetophenone(4 MAP) was synthesized by the acylation of anisole with acetic anhydride in the presence of HY zeolite. The addition of an appropriate amount of some solvent such as dichloromethane, chloroform, carbon disulfide or chlorobenzene to the reaction system can improve the yield of the acylated product to a certain extent. HY zeolite used can be recovered, and reused after being regenerated, obtaining almost the same yield of 4 MAP as the fresh zeolite.

Friedel-Crafts Acylation of Ferrocene Catalyzed by Solid Superacid,Silica-supported Polytrifluoromethanesulfosiloxane

Solid superacid, silica-supported polytrifluoromethanesulfosiloxane (SiO2-Si-SCF3) wasfirstly used in the Friedel-Crafts acylation of ferrocene as a novel catalyst. IR spectra, WAXD andspecific surface area of the superacid SiO2-Si-SCF3 were also investigated.

ZEOLITE－CATALYZED FRIEDEL－CRAFTS ACYLATION OF AROMATICS：I》．SYNTHESIS OF 4－ACYL ANISOLE WITH A HY CATALYST

A series of aromatic ketones 4-acyl anisole were synthesized with high yield by using carboxylic acids as acylating agents and a HY zeolite as catalyst.

Silver(I) Oxide Mediated Regioselective Monoacylation of 2,4-Dihydroxyls in L-Rhamnopyranosides

A series of acyls （Ac, Bz and Ts） were introduced regioselectively to the 2-hydroxyl in methyl and ally 3-O-benzyl-α-L-rhamnopyranosides mediated by silver（I） oxide in the presence of a catalytic amount of potassium iodide in 56-78% yields.

The effect of operating conditions on acylation of 2-methylnaphthalene in a microchannel reactor

Acylation of 2-methylnaphthalene(2-MN) is a very important reaction in organic synthesis,and the effiency of the continuous reactor is more than one of the batch reactor.Considering that the Friedel–Crafts acylation is a rapid exothermic reaction,in this study,we perform the acylation of 2-MN in a stainless steel microchannel flow reactor,which is characterized by high mass and heat transfer rates.The effect of reactant ratio,mixing temperature,reaction temperature,and reaction time on product yield and selectivity were investigated.Under the optimal conditions,2-methyl-6-propionylnaphthalene(2,6-MPN) was obtained in 85.8% yield with 87.5% selectivity.Compared with the conventional batch system,the continuous flow microchannel reactor provides a more efficient method for the synthesis of 2,6-MPN.

Friedel-Crafts Acylation Reactions Using Catalytic SbCl_5-TEBA Complex as an Efficient Catalyst

SbCl_5-TEBA (PhCH_2NEt_3Cl) complex catalyzes the Friedel-Crafts acylation reactionsefficiently.

Preliminary Studies on Acylation of 10β-OH and 7α-OH in 7-Epi-10-deacetylpaclitaxel

10β-OH can be acylated cleanly when 7α-OH is also free, and thus a facile access to semisynthesis of 7-epi-paclitaxel was proposed. A 2's, 3's-oxazoline paclitaxel analog was serendipitously synthesized

Studies on O-,N-Acylation of 3-Hydroxyisoxazole and Their Regioselective Synthesis(Ⅰ)——O-,N-acylation of 5-Methyl-3-hydroxyisoxazole with 2,2-Dimethyl 3-Substituted Cyclopropanecarboxylic Chlorides

The reactions of 5-methyl-3-hydroxyisoxazole with 2, 2-dimethyl, 3-substituted cyclopropanecarboxylic chlorides give O-acyl-5-methyl-3-hydroxyisoxazole and N-acyl-5-methylisoxazolin-3-one derivatives. The ratio of O-acyl to N-acyl product depends upon the acylation reagents. O-acyl derivatives can be converted to the N-acyl compounds by isomerization under acidic conditions or heating.

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl_3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.

Samarium-promoted one-pot reductive acylation of nitrobenzene to acetanilide

Acetanilide was synthesized from nitrobenzene in the presence of acetic anhydride, acetic acid and samarium by a one-pot procedure in good yield.

Acylation of 3,4-Diaminofurazan

An acylation method of 3,4-diaminofurazan was developed. Under the catalysts of p-Tolu- enesulfonic acid, 3-amino-4-formylaminofurazan, 3-amino-4-acetylaminofurazan, 3-amino-4-propio- nylaminofurazan, 3-amino-4-butylramino-furazan and 3-amino-4-benzoylaminofurazan were synthe- sized by acylation of 3,4-diaminofurazan with formic acid, acetic acid, propionic acid, butyric acid and benzoic acid respectively. Also, 3,4-diacetylaminofurazan and 3,4-dipropionylaminofurazan were synthesized by acylation of 3,4-diaminofurazan with acetic anhydride and propionic anhydride re- spectively. Compared with the traditional method which uses acyl halogen as reagent, our method reduced the reaction time and increased the yield and purify. The 3-amino-4-acylaminofurazan could be hydrolyzed to 3,4-diaminofurazan in ethanol with acid catalyst.

The Synthesis of 4-Arylcarbonyl-3-methoxycarbonyl-2-phenylfurans by Friedel-Crafts Acylation Reactions

Keto esters 8, 4-arylcarbonyl-3-methoxycarbonyl-2-phenylfurans, potential precursors of the synthesis of furofuran lignans, were obtained from dimethyl 2-phenylfuran-3,4-dicarboxylate 2. Diester 2 was selectively hydrolyzed to monoacid 6 followed by converting to its acid chloride 7. Friedel-Crafts acylation reactions of 7 with aromatic compounds afforded keto esters 8. The geometric structures of 8 and its precursors were elucidated and verified by NMR spectra.

ZEOLITE－CATALYZED FRIEDEL－CRAFTS ACYLATION OF AROMATICS∶Ⅲ．SYNTHESIS OF 4－ACYL ANISOLE WITH USY CATALYST

The synthesis with high yield of a series of4-acyl anisole was performed through the Friedel-Crafts reaction of anisole with alkanoic or substituted benzoic acids in thepresence of an ultrastable Y zeolite (USY) catalyst.

A Novel Friedel-Crafts Acylation Reaction of Anisole for Production of 4-Methoxyacetophenone with High Selectivity and Sufficient Reusability of Mordenite Zeolite Catalyst

Zeolite catalyzed Friedel-Crafts reactions were examined using acetic anhydride as an acetylating agent and an acetic acid as a solvent. It revealed that the reaction of anisole smoothly occurred quantitatively for 3 h using mordenite zeolite with SiO2/Al2O3 = 200, and with SiO2/Al2O3 = 110, the increasing of Br?nsted acidity allowed to completely react within 2 h. Furthermore the selectivity of 4-methoxyacetophenone (4-MA) among the isomers was found to be quantitative, no by-products and/or isomers were not detectable. With the excellent recyclability and reusability, the mordenite zeolite exhibited at least 30 times quantitatively both conversion of anisole and selectivity of 4-MA. The mordenite catalysts of fresh and the used after 30 times were characterized. This opportunity obviously indicates the sufficient shape selective catalyst of mordenite zeolite and gives a green synthetic tool for heterogeneous acylation reaction.