Application of fluid modulus inversion to complex lithology reservoirs in deep-water areas

It has been a challenge to distinguish between seismic anomalies caused by complex lithology and hydrocarbon reservoirs using conventional fluid identification techniques,leading to difficulties in accurately predicting hydrocarbon-bearing properties and determining oil-water contacts in reservoirs.In this study,we built a petrophysical model tailored to the deep-water area of the Baiyun Sag in the eastern South China Sea based on seismic data and explored the feasibility of the tri-parameter direct inversion method in the fluid identification of complex lithology reservoirs,offering a more precise alternative to conventional techniques.Our research found that the fluid modulus can successfully eliminate seismic amplitude anomalies caused by lithological variations.Furthermore,the seismic databased direct inversion for fluid modulus can remove the cumulative errors caused by indirect inversion and the influence of porosity.We discovered that traditional methods using seismic amplitude anomalies were ineffective in detecting fluids,determining gas-water contacts,or delineating high-quality reservoirs.However,the fluid factor Kf,derived from solid-liquid decoupling,proved to be sensitive to the identification of hydrocarbon-bearing properties,distinguishing between high-quality and poor-quality gas zones.Our findings confirm the value of the fluid modulus in fluid identification and demonstrate that the tri-parameter direct inversion method can significantly enhance hydrocarbon exploration in deep-water areas,reducing associated risks.

Resource Potential and Exploration Techniques of Stratigraphic and subtle Reservoirs in China

The onshore oil and gas exploration has stepped into a new stage in China, with equal attention paid to both stratigraphic and subtle reservoirs and structural reservoirs. In the past few years, the increases in oil reserves in most basins were found mainly in the stratigraphic and subtle reservoirs. Latest resource evaluation shows that the onshore stratigraphic and subtle reservoirs in China account for 42% of the total remaining resource, the highest in the four major exploration regions. Therefore, these reservoirs will be the most practical, potential and prevalent fields for long-lasting oil and gas exploration in onshore China. Among PetroChina's annual oil geologic reserves of 4.3 × 108t^4.6× 108t, the stratigraphic and subtle reservoirs account for more than 50%. In such basins as Songliao, Ordos, Bohai Bay, Junggar, Tarim, Sichuan and Erlian basins, stratigraphic and subtle reservoirs with geologic reserves ranging from 5×107t to 3×108t were discovered, including Ansai, Jing'an, Daqingzijing, Liuxi, well-21 area in Shinan, and Hadexun. Stratigraphic and subtle reservoirs in the four types of inland basins differ from each other in the formation conditions and the distribution patterns. While continental basins are controlled by unconformity surface, maximum flooding surface and fracture surface, the Paleozoic marine basins are influenced by paleouplift, unconformity surface, and fluctuation of the sea level. Through exploration practices and research, PetroChina has formed its own technique series focused on 3-D seismics and sequence stratigraphy.

Control of Formation of Lithological Reservoirs by Surrounding Mudstone

Taking the Jiyang depression as an example, this paper discusses the control of the formation of lithological reservoir by surrounding rocks by integrated application of geological analysis, physical simulation, and the analysis of oil ＆ gas accumulation mechanism. Geological statistical shows that the major burial depth and interval of lithological reservoirs in the Jiyang depression are related to the hydrocarbon generation in and expulsion from the Lower Tertiary source rocks and the time of the formation of most lithological reservoirs coincides with the peak of hydrocarbon generation and expulsion. The lithological traps located in the center of effective source rocks are propitious to high oil saturation than those located on the margin of effective source rocks. The hydrocarbon charge degree of the lithological reservoir has a positive correlation with the intensity of hydrocarbon expulsion from surrounding source rocks. Geological analyses and NMR experiments also show that the oil saturation of surrounding source rocks control the hydrocarbon potential of lithological traps, and a critical value for oil saturation of surrounding mudstone is required, that is, when the oil saturation of surrounding mudstone is lower than this critical value, no oil and gas accumulate in the lithological trap. The control of surrounding mudstone on the oil-bearing properties of lithological reservoirs is also analyzed by the mechanisms of hydrocarbon generation and expulsion as well as accumulation.

Formation mechanisms,potentials and exploration practices of large lithologic gas reservoirs in and around an intracratonic rift:Taking the Sinian-Cambrian of Sichuan Basin as an example

By examining structures,sediments,reservoirs and accumulation assemblages in the Deyang-Anyue rift and its surrounding area,four new understandings are obtained.First,during the initiation period of Deyang-Anyue rift,multiple groups of faults developed in the rift due to the effect of tensile force,bringing about multiple mound and shoal belts controlled by horsts in the second member of the Sinian Dengying Formation;in the development stage of the rift,the boundary faults of the rift controlled the development of mound and shoal belts at the platform margin in the fourth member of Dengying Formation;during the shrinkage period of the rift,platform margin grain shoals of the Cambrian Canglangpu Formation developed in the rift margin.Second,four sets of large-scale mound and shoal reservoirs in the second member of Dengying Formation,the fourth member of Dengying Formation,Canglangpu Formation and Longwangmiao Formation overlap with several sets of source rocks such as Qiongzhusi Formation source rocks and Dengying Formation argillaceous limestone or dolomite developed inside and outside the rift,forming good source-reservoir-cap rock combinations;the sealing of tight rock layers in the lateral and updip direction results in the formation model of large lithologic gas reservoirs of oil pool before gas,continuous charging and independent preservation of each gas reservoir.Third,six favorable exploration zones of large-scale lithologic gas reservoirs have been sorted out through comprehensive evaluation,namely,mound and shoal complex controlled by horsts in the northern part of the rift in the second member of Dengying Formation,isolated karst mound and shoal complex of the fourth member of Dengying Formation in the south of the rift,the superimposed area of multi-stage platform margin mounds and shoals of the second and fourth members of Dengying Formation and Canglangpu Formation in the north slope area,the platform margin mounds and shoals of the second and fourth members of Dengying Formation in the west side of the rift,the platform margin mound and shoal bodies of the fourth member of Dengying Formation in the south slope area,etc.Fourth,Well Pengtan-1 drilled on the mound and shoal complex controlled by horsts of the second member of Dengying Formation in the rift and Well Jiaotan-1 drilled on the platform margin mound and shoal complex of the North Slope have obtained high-yield gas flows in multiple target layers,marking the discovery of a new gas province with reserves of(2-3)×10^(12) m^(3).This has proved the huge exploration potential of large lithologic gas reservoir group related to intracratonic rift.

Research Advances and Exploration Significance of Large-area Accumulation of Low and Medium Abundance Lithologic Reservoirs

In recent years, a series of large low and medium abundance oil and gas fields are discovered through exploration activities onshore China, which are commonly characterized by low porosity-permeability reservoirs, low oil/gas column height, multiple thin hydrocarbon layers, and distribution in overlapping and connection, and so on. The advantageous conditions for large-area accumulation of low-medium abundance hydrocarbon reservoirs include： （1） large （fan） delta sandbodies are developed in the hinterland of large flow-uncontrolled lake basins and they are alternated with source rocks extensively in a structure like ＂sandwiches＂; （2） effective hydrocarbon source kitchens are extensively distributed, offering maximum contact chances with various sandbodies and hydrocarbon source rocks; （3） oil and gas columns are low in height, hydrocarbon layers are mainly of normal-low pressure, and requirements for seal rock are low; （4） reservoirs have strong inheterogeneity and gas reservoirs are badly connected; （5） the hydrocarbon desorption and expulsion under uplifting and unloading environments cause widely distributed hydrocarbon source rocks of coal measures to form large-area reservoirs; （6） deep basin areas and synclinal areas possess reservoir-forming dynamics. The areas with great exploration potential include the Paleozoic and Mesozoic in the Ordos Basin, the Xujiahe Formation in Dachuanzhong in the Sichuan basin, deep basin areas in the Songliao basin etc. The core techniques of improving exploration efficiency consist of the sweetspot prediction technique that focuses on fine characterization of reservoirs, the hydrocarbon layer protecting and high-speed drilling technique, and the rework technique for enhancing productivity.

Major controlling factors and hydrocarbon accumulation models of large-scale lithologic reservoirs in shallow strata around the Bozhong sag,Bohai Bay Basin,China

Based on the practice of oil and gas exploration and the analysis of shallow lithologic reservoirs,combined with the allocation relationship and enrichment law of oil and gas accumulation factors,main controlling factors and models of hydrocarbon accumulation of large lithologic reservoirs in shallow strata around the Bozhong sag are summarized,and favorable exploration areas are proposed.The coupling of the four factors of“ridge-fault-sand-zone”is crucial for the hydrocarbon enrichment in the shallow lithologic reservoirs.The convergence intensity of deep convergence ridges is the basis for shallow oil and gas enrichment,the activity intensity of large fault cutting ridges and the thickness of cap rocks control the vertical migration ability of oil and gas,the coupling degree of large sand bodies and fault cutting ridges control large-scale oil and gas filling,the fault sealing ability of structural stress concentration zones affects the enrichment degree of lithologic oil and gas reservoirs.Three enrichment models including uplift convergence type,steep slope sand convergence type and depression uplift convergence type are established through the case study of lithologic reservoirs in shallow strata around the Bozhong sag.

The Integrated Approach to Seismic Attributes of Lithological Characterization of Reservoirs: Case of the F3 Block, North Sea-Dutch Sector

Technological development, particularly the development of signal processing, has contributed to the improvement of the quality of results in the analysis of the characteristics of hydrocarbon reservoirs. This scientific advance is especially marked by the introduction of seismic attributes in the characterization of reservoirs. This paper is aimed at evaluating the contribution of seismic attributes in the lithological characterization of hydrocarbon accumulation zones. Thus, it has been found that instantaneous attributes make it possible to highlight the different properties of reservoir rocks. Techniques for extracting three-dimensional volume attributes have been applied to a 3D seismic data volume of the F3 block in the Dutch sector of the North Sea. The purpose of using these volume attributes is to extract signal characteristics from lithofacies in hydrocarbon zones. The results provide a remarkable contribution to instantaneous seismic attributes in reservoir location, hydrocarbon detection, and reservoir lithological prediction. The instantaneous amplitude, the derivative of amplitude 1, the factor Q, the energy and the Hilbert transform are attributes which highlight the presence of hydrocarbons through the bright spots. Thus, curvature, similarity, dip, and coherence are useful in the determination of traps such as faults and anticlines. The crossing of the instantaneous amplitude and the instantaneous frequency makes it possible to analyze the lithofacies. In the same way, the analysis of the crossed diagrams between the porosity and the instantaneous amplitude made it possible to define the different layers of the reservoir.

Formation conditions of Sinian–Cambrian large lithologic gas reservoirs in the north slope area of central Sichuan Basin,SW China

Based on analyses of characteristics,hydrocarbon charging history and geological conditions for the formation of Sinian-Cambrian reservoirs in the north slope area of central Sichuan paleo-uplift,the natural gas origin,accumulation evolution,accumulation pattern and formation conditions of large lithologic gas reservoirs have been investigated.Through comprehensive analyses of natural gas composition,carbon and hydrogen isotopic compositions,fluid inclusions,reservoir bitumen,and geological conditions such as lithofacies paleogeography and beach body characterization,it is concluded that:(1)The natural gas in the Sinian-Cambrian of the north slope area is mainly oil cracking gas,and different contribution ratios of multiple sets of source rocks lead to different geochemical characteristics of natural gas in different reservoirs.(2)Although the both Sinian and Cambrian gas reservoirs in this area are lithologic gas reservoirs under monocline background,the former has normal-pressure and the latter has high-pressure.There are three types of source-reservoir-caprock combinations:single source with lower generation and upper reservoir,double sources with lower generation and upper reservoir or with side source and lateral reservoir,double sources with lower generation and upper reservoir or with upper generation and lower reservoir.The Permian-Triassic is the main generation period of oil,Early-Middle Jurassic is the main generation period of oil cracking gas and wet gas,and Late Jurassic-Cretaceous is the main generation period of dry gas.(3)The Sinian-Cambrian system of the north slope area has two favorable conditions for formation of large lithologic gas reservoirs,one is that the large scale beach facies reservoirs are located in the range of ancient oil reservoirs or near the source rocks,which is conducive to the"in-situ"large-scale accumulation of cracked gas in the paleo-oil reservoirs,the other is that the large scale mound-beach complex reservoirs and sealing layers of inter beach tight zones match effectively to form large lithologic traps under the slope background.The research results confirm that the north slope area has large multi-layer lithologic gas reservoirs with more than one trillion cubic meters of natural gas resources and great exploration potential.

Automatic discrimination of sedimentary facies and lithologies in reef-bank reservoirs using borehole image logs

Reef-bank reservoirs are an important target for petroleum exploration in marine carbonates and also an essential supplemental area for oil and gas production in China. Due to the diversity of reservoirs and the extreme heterogeneity of reef-banks, it is very difficult to discriminate the sedimentary facies and lithologies in reef-bank reservoirs using conventional well logs. The borehole image log provides clear identification of sedimentary structures and textures and is an ideal tool for discriminating sedimentary facies and lithologies. After examining a large number of borehole images and cores, we propose nine typical patterns for borehole image interpretation and a method that uses these patterns to discriminate sedimentary facies and lithologies in reeI^bank reservoirs automatically. We also develop software with user-friendly interface. The results of applications in reef-bank reservoirs in the middle Tarim Basin and northeast Sichuan have proved that the proposed method and the corresponding software are quite effective.

3-D seismic interpretation of stratigraphic and structural features in the Upper Jurassic to Lower Cretaceous sequence of the Gullfaks Field,Norwegian North Sea:A case study of reservoir development

The 3-D seismic dataset is a key tool to analyze and understand the mechanism of structural and stratigraphic hydrocarbon(HC)trapping in the subsurface.Conventionally used subsurface seismic characterization methods for fractures are based on the theory of effective anisotropy medium.The aim of this work is to improve the structural images with dense sampling of 3-D survey to evaluate structural and stratigraphic models for reservoir development to predict reservoir quality.The present study of the Gullfaks Field,located in the Norwegian North Sea Gullfaks sector,identifies the shallowest structural elements.The steepness of westward structural dip decreases eastward during the Upper Jurassic to Lower Cretaceous deposition.Reservoir sands consist of the Middle Jurassic deltaic deposits and Lower Jurassic fluvial channel and delta plain deposits.Sediment supply steadily prevails on sea-level rise and the succession displays a regressive trend indicated by a good continuous stacking pattern.The key factor for the development of reservoirs in the Gullfaks Field is fault transmissibility with spatially distributed pressure.The majority of mapped faults with sand-to-sand contacts are non-sealing,which provide restriction for the HC flow between the fault blocks.The traps for HC accumulation occur between the post-rift and syn-rift strata,i.e.antiform set by extensional system,unconformity trap at the top of syndeposition,and structural trap due to normal faults.Overall reservoir quality in the studied area is generally excellent with average 35%porosity and permeability in the Darcy range.Our findings are useful to better understand the development of siliciclastic reservoirs in similar geological settings worldwide.

Formation conditions of Neogene large-scale high-abundance lithologic reservoir in the Laibei low uplift,Bohai Sea,East China

By using drilling,high-precision 3 D seismic data,data of geochemistry,logging and testing,the reservoir characteristics and accumulation conditions of the KL6-1 lithologic oilfield in the Laibei Low Uplift in the Bohai Sea are examined comprehensively.The study shows that:KL6-1 oilfield is a monolithic,high-quality,large-scale Neogene lithologic oilfield featuring shallow reservoir depth,high productivity,concentrated oil-bearing intervals,large oil-bearing area,and high reserve abundance;hydrocarbon source supply from two directions provides a sufficient material basis for the formation of large oil field;two types of"inherited structural ridge"developed under the effect of block rotation,late active faults formed by Neotectonic movement,and widely distributed contiguous sand bodies provide an efficient oil and gas transportation system for the large-scale accumulation of oil and gas;contiguous channel and lacustrine lowstand system sand bodies developed in low accommodation condition provide the basic condition for the formation of large-scale lithologic traps;deep formations structural ridge,faults(dominant migration pathways)and large-scale superimposed contiguous sand bodies constitute a"vine type"oil and gas migration and accumulation system in the Laibei Low Uplift,which is conducive to the formation of large-scale and high-abundance lithologic reservoir in this area.The successful discovery of KL6-1,100 million ton reserve order lithologic oil field,has revealed the exploration potential of Neogene large lithologic reservoirs in Bohai Sea,expanded the exploration field,and also has certain reference significance for the exploration of large lithologic reservoirs in similar areas.

Distribution regularity of the Ordovician reef-bank reservoir inside sequence stratigraphic ework in central Tarim Basin

Based on the integrated study of the outcrops, the seismic, drilling and logging data of Lianglitage formation in central Tarim Basin, the sequence stratigraphic framework of the platform margin is built, and the Lianglitage formation is divided into 3 third-order sequences. The vertical pattern and lateral distribution for carbonate reef-bank reservoir in sequence stratigraphic framework are analyzed. The reef-bank reservoir mainly developed in highstand system tract of sequence Ssq2, and distributed along the carbonate platform margin of the Middle-Late Ordovician in central Tarim Basin. The mudstone mound, organic reef, granule bank are vertically stacked. Laterally, the area of well shun3-shun4-shun2-shun6 are characterized by multiphase bank reservoir overlapping, and the area of well TZ82 -TZ44 - TZ161 -TZ24 - TZ26 are characterized by multiphase organic reef and bank overlapping. The reef-bank complexes in sequence Ssq2 are the main targets of exploration in central Tarim Basin.

Log identification method in complex sand reservoirs

In order to obtain effective parameters for complex sand reservoirs,a log evaluation method for relevant reservoir parameters is established based on an analysis in the gas-bearing sandstone with high porosity and low permeability,low porosity and permeability and on various characteristics of log responses to reservoir lithologies and physical properties in the Neopleozoic sand reservoir of the Ordos basin.This log evaluation method covers the Cook method that is used to evaluate the porosity and oiliness in high porosity and low permeability reservoirs and another method in which the mineral content,derived from geochemical logs,is used to identify formation lithologies.Some areas have high calcium and low silt content,not uniformly distributed,the results of which show up in the complex formation lithologies and conventional log responses with great deviation.The reliability of the method is verified by comparison with conventional log data and core analyses.The calculation results coincide with the core analytical data and gas tests,which indicate that this log evaluation method is available,provides novel ideas for study of similar complex reservoir lithologies and has some reference value.

Log evaluation of fractured igneous reservoirs in Songliao Basin

The petrophysical parameters are bad in most igneous reservoirs of Songliao Basin because of the very low porosity and permeability.The evaluation of igneous reservoirs has not been fully studied so far.The current technique of formation evaluation and interpretation used in sedimentary formations face a series of problems and difficulties.In this study,The PCA was used to identify lithology,a multi-mineral model "QAPM" was proposed."Surface effect" must be considered when evaluating saturation.A software "SIMPLE" was developed and was used to deal with the logging data in over 70 wells with good results were achieved.

Formation Conditions and Exploration-favoring Areas of Subtle Reservoirs in West Taibei Sag

At the initial stage of subtle reservoir exploration in the shallow to medium formations of the Taibei Sag, Tuha Basin, so far, three kinds of subtle reservoirs (stratigraphic, lithologic and structural-lithologic reservoirs) have been found. Since both the amount and reserve of the discovered subtle reservoirs are small, a great exploration potential remains in the Taibei Sag. The shallow to medium formations in the west of the Taibei Sag were divided into three second-order sequences and ten third-order sequences, of which the rising cyclothems of SQ(J2q) and SQ8 (J2s2) datum level are major exploration targets for the subtle reservoirs (lithologic). The depositional systems of Qiquanhu and Subashi braided river delta were developed there, where the sedimentary sand body is dominated by the regional slopes and slope break belts. There are four main modes the formation of lithologic traps: deltaic front onlap on the slope belt, deltaic front toplap on the slope break belt, lately tilted frontal sand body and sublacustrine fan—slope fan on the slope break belt, of which the first three modes are the major styles of the formation of subtle reservoirs. Major targets for subtle reservoir exploration in the near future include Putaogou Member on the north slope of Huoyanshan, the east slope of Pubei, the nose-like palaeohigh regions of Huobei, Subashi and Lianmuqin, around the Shengbei secondary sag.

Hydraulic fracture geometry and proppant distribution in thin interbedded shale oil reservoirs

Small-scale true triaxial sand fracturing experiments are conducted on thin interbedded shale samples made from cores of Permian Lucaogou Formation shale oil reservoir in Jimsar sag, Junggar Basin, NW China. Combined with high-precision CT scanning digital core model reconstruction technology, hydraulic fracture geometry and proppant distribution in thin interbedded shale oil reservoirs are studied. The research shows that: In thin interbedded shale oil reservoir, the interlayer difference of rock mechanics and the interlayer interface near the wellbore cannot restrain the growth of fracture height effectively, but has a significant impact on the fracture width distribution in the fracture height direction. Hydraulic fractures in these reservoirs tend to penetrate into the adjacent layer in “step-like” form, but have a smaller width at the interface deflection, which hinders the transport of proppant in vertical direction, resulting in a poor effect of layer-crossing growth. In shale layers with dense laminae, hydraulic fractures tend to form “丰” or “井” shapes. If the perforated interval is large in rock strength and high in breakdown pressure, the main fracture is fully developed initially, large in width, and supported by enough sand. In contrast, if the perforated interval is low in strength and rich in laminae, the fracturing fluid filtration loss is large, the breakdown pressure is low, the main fracture will not open wide initially, and likely to have sand plugging. Proppant is mainly concentrated in the main hydraulic fractures with large width near the perforated layer, activated laminae, branch fractures and fractures in adjacent layers contain only a small amount of(or zero) proppant. The proppant is placed in a limited range on the whole. The limit width of fracture that proppant can enter is about 2.7 times the proppant particle size.

Reservoir Prediction Restricted by Sequence Stratigraphy--A Case Study of Bioclastic Shoal Reservoir in Changxing Formation of Jiannan Area

Bioclastic shoal reservoir in Changxing Formation of Jiannan area is characterized by small thickness and strong heterogeneity. The uncertainty of the reservoir distribution pattern has confined the effective development of this area, so the accurate bioclastic shoal reservoir prediction would be the key to achieve development breakthroughs. Based on drilling, well-log, seismic and core analysis data, this article conducted exquisite sequence stratigraphic classification and established isochronal regional stratigraphic framework of Changxing Formation in Jiannan area. The reservoir seismic corresponding features were determined by exquisite calibrating bioclastic shoal reservoir in Changxing Formation. Therefore, seismic processing methods, such as multiple attribute analysis and amplitude inversion, were applied to attain more reliable reservoir prediction results, which indicated the distribution of vertical reservoir in SSQ2, the IV sequence order and the distribution of horizontal reservoir around Well J43 and JZ1 in the platform margin of the study area.

松辽盆地北部基岩储层有效性评价技术

针对松辽盆地北部基岩岩性复杂、储层致密、裂缝发育以及储层参数计算精度低、储层有效性评价难等问题,提出“原岩+成分+结构”的三维岩性识别新方法;利用声波-密度交会图计算斜率M,利用中子-密度交会图计算斜率N,建立了基于M、N的变骨架密度有效孔隙度模型;通过研究基岩导电机理,校正裂缝附加导电性,建立了含裂缝储层含气饱和度模型;综合考虑有效孔隙度、次生孔隙度及裂缝发育程度,确定了基岩储层有效厚度标准及有效储层分类标准。应用结果表明:该套技术岩性解释符合率可达87.5%,气层识别符合率达88.5%,孔隙度、饱和度计算精度满足储量规范要求。研究结果可为松辽盆地北部基岩储层地质勘探及储量评价提供技术保障。

川东地区龙潭组页岩岩性序列及勘探意义

川东地区龙潭组具有较大的页岩气勘探前景,该地层沉积于海陆过渡环境,沉积相变化快,岩性复杂,存在难以通过常规的矿物成分方法划分岩相以及当前岩相划分尚不精确的问题,制约了该地区龙潭组页岩有利岩相带识别及勘探。本文基于岩心观察、野外剖面实测和薄片鉴定,结合钻井的泥地比、单层岩性厚度,建立了川东地区龙潭组7种特征岩性组合模式(泥页岩型、富泥含砂型、富泥含灰型、灰泥互层型、富灰含泥型、致密灰岩型和火成岩型);综合TOC、孔隙度、含气性、脆性指数等页岩储层特征参数,明确了不同岩性组合在龙潭组各段的平面分布规律。研究表明,纵向上优势岩性组合主要为龙潭一段富泥含灰型和泥页岩型,龙潭二段主要为泥页岩型、灰泥互层型和富泥含灰型。平面上龙潭一段优势岩性组合富泥含灰型主要分布在开州—云阳一带,泥页岩型主要分布在重庆—綦江一带;龙潭二段优势岩性组合泥页岩型分布在巴南—綦江一带,灰泥互层型分布在达州一带,富泥含灰型分布在万州—梁平—石柱一带。该项研究成果为川东地区龙潭组页岩气勘探提供了重要依据。

苏北盆地黄桥地区盐城组氦气成藏地质条件及富集规律

苏北盆地黄桥地区新近系盐城组天然气中He含量介于1.05%~1.40%,普遍高于工业品位,为壳—幔复合型氦气资源。目前,对于这种来源的氦气富集主控因素以及勘探目标评价的研究较为薄弱,为此,系统剖析了黄桥地区典型富氦气藏氦气成因、来源及圈闭特征,重点分析了幔源断裂对富氦气藏输导作用、盐城组圈闭条件的影响,提出了黄桥地区盐城组富氦气藏富集模式。结果表明:(1)黄桥地区南新街深大断裂在盐城组沉积时期持续活动,导致幔源物质上涌,伴随着火山活动及CO_(2)、N_(2)以及氦气沿断裂运移至浅层;(2)黄桥地区盐城组埋深为370~400 m,盐城组底部砂岩厚度约为40 m,上覆10~40 m泥岩,储盖组合有利,富氦气层由东往西尖灭;(3)黄桥地区盐城组整体为单斜构造,盐城组底部界面与下伏地层呈角度不整合,通过地震标定及解释,刻画出了富氦气层岩性—地层复合圈闭面积。黄桥地区盐城组富氦气藏具有断裂沟通地幔输导、砂岩储集、泥岩作为盖层、岩性—地层复合圈闭富集等特征,该认识对黄桥地区氦气有利目标评价具有重要意义。