Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

Analysis of the Application of Static Load Test in Bridge Bearing Capacity Testing

This article uses real engineering projects as examples to analyze how static load test technology is applied in testing the bridge-bearing capacity.The analysis covers aspects such as testing section layout,test load and efficiency coefficient,loading plan,evaluation optimization,test result modification,and result evaluation.The aim is to support the accurate detection and evaluation of bridge-bearing capacity.

Load Testing in Bridge Maintenance

Highway bridges are a crucial component in road transportation networks.These bridges must be maintained according to usage requirements regularly.Test results must be considered before devising a maintenance plan.Load testing is a vital method of assessing the quality and performance of highway bridges.The outcomes of these tests facilitate the formulation of maintenance plans.This article examines the definition of load testing,its significance,and the process of execution,with the goal of providing support for bridge inspection and maintenance.

Technical Analysis of Highway Bridge Static Load Test

Highway bridges are an important part of the transportation industry and can promote social economic construction and development.In actual operation,highway bridges are often damaged due to overload and natural factors,which tend to affect the safety and shorten the service life of these bridges.Assessing the overall state and performance of highway bridges is therefore a key element.Static load test,which is a type of sustainable detection experiment,has many advantages,including low cost,high efficiency,and high accuracy.In this paper,the bridge structure is analyzed through the application of theoretical calculations and relevant comparisons,so as to judge the operating state of the bridge.

Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge

Based on the as-built load test of a large bridge,this paper introduces the procedure of the prestressed concrete continuous rigid frame bridge load test.Numerical analysis of the bridge was carried out by simulating and establishing a finite element model,and comparative analysis was carried out with the measured values.The results show that the calculated values were basically consistent with the measured values,which showed that the establishment method of the model was reasonable,and the mechanical performance of the bridge met the service requirements of the designed live load.

Static Load Test Detection of Continuous Rigid- Frame Railway Bridge

The quality of the continuous rigid-frame railway bridge is related to the safety of train operation,so it is necessary to test its stiffness,strength,and other indicators.Static load test is a common technique for bridge inspection.This article summarizes the purpose of the static load test for a continuous rigid-frame railway bridge,including the required equipment,operation methods,etc.,and lists examples to analyze the operation process and precautions of static load test,hoping to provide reference information for relevant personnel.

Effect of antidepressant treatment on water load test and cortisol changes in patients with functional dyspepsia

BACKGROUND： It has been demonstrated that patients with functional dyspepsia have experiences social life stress events, and accompanied by psychological disorders, mainly manifested as depression and anxiety.Mental factors can lead to excessive gastrointestinal consensual reaction, and result in different brain-gut axis disturbance, and then cause the gastrointestinal sensorimotor abnormality and endocrine changes.OBJECTIVE： To observe the effect of antidepressant treatment on the changes of water load and serum cortisol in patients with functional dyspepsia, and analyze the therapeutic mechanism.DESIGN： A comparative observation.SETTING： The First Affiliated Hospital o Zhengzhou University.PARTICIPANTS： Forty-five patients with functional dyspepsia accompanied by depression were selected from the Department of Gastroenterology, the First Affiliated Hospital of Zhengzhou University from July 2004 to July 2006, and they were 25 - 65 years of age, and their disease courses ranged 1 - 10 years. They were all accorded with the diagnostic standards for Rome Ⅱ functional dyspepsia functional dyspepsia. As the patients＇ will, they were divided into treatment group （n =30, 12 males and 18 females） and control group （n =15, 6 males and 9 females）, and there were no significant differences in the data between the two groups （P 〉 0.05）. The programs were discussed and agreed by the committee of medical ethics of the First Affiliated Hospital of Zhengzhou University. Informed contents were obtained from all the patients.METHODS： In the treatment group, the patients were treated with venlafaxine sustained release capsule （75 mg per day）, and those with sleep disorder were added by benzodiazepines （alprazolam）. In the control group, the patients were given routine treatments of antacid, prokinetics, etc. Before and after 8-week treatment, the following examinations were performed： ① The gastrointestinal symptoms were assessed according to the symptoms; ② The severity of depression was evaluated with Hamilton depression scale （HAMD）; ③The relaxation of proximal stomach was observed using water load test; ④ The serum level of cortisol was detected.MAIN OUTCOME MEASURES： ① Symptom score; ② HAMD score; ③ Water load amount; ④Serum level of cortisol.RESULTS： All the 45 patients were involved in the analysis of results. ① Symptom score： The scores of gastrointestinal symptoms were decreased as compared with those before treatment in both the treatment group and control group （P 〈 0.05）. ② HAMD scores： The scores of HAMD were decreased as compared with those before treatment in both the treatment group and control group （P 〈 0.05）. ③ Water load amount：The total effective rate was significantly higher in the treatment group than the control group （P 〈 0.05）. ④The serum levels of cortisol after treatment were significantly lower than those before treatment in the patients with severe gastrointestinal symptoms in the treatment group and control group （P 〈 0.05）.CONCLUSION： Antidepressants can normalize the cortisol level of patients with functional dyspepsia, and then decrease gastric sensitivity and ameliorates the receptive relaxation of proximal stomach, also increase the water load amount correspondingly, and finally control the gastrointestinal symptoms of functional dyspepsia.

Field load testing of copper extraction aeration pipes under simulated high heap pile

Recently a research team at Ohio University,USA,conducted a unique full-scale feld load test to simulate the aeration pipe installations at a copper extraction mine operated in Chile.The overliner material taken from the mine was used in recreating the in situ conditions.Electric heaters were utilized to raise the temperature inside each pipe to simulate the essential element of the copper extraction process.The maximum vertical deflection reached by the test pipes was close to 20%,when the simulated heap pile height was 80 m.The plastic pipes and the overliner material were also tested in the laboratory.Based on the results,the maximum heap pile fll depth was recommended for the aeration system.The results indicated that the vertical deflection was the primary performance index for the aeration pipes installed in heap piles at mines.Lastly,the pipe made of polypropylene resin was super.

Improved fault location method for AT traction power network based on EMU load test

The autotransformer(AT)neutral current ratio method is widely used for fault location in the AT traction power network.With the development of high-speed electrified railways,a large number of data show that the relation between the AT neutral current ratio and the distance from the beginning of the fault AT section to the fault point(Q-L relation)is mostly nonlinear.Therefore,the linear Q-L relation in the traditional fault location method always leads to large errors.To solve this problem,a large number of load-related current data that can be used to describe the Q-L relation are obtained through the load test of the electric multiple unit(EMU).Thus,an improved fault location method based on the back propagation(BP)neural network is proposed in this paper.On this basis,a comparison between the improved method and the traditional method shows that the maximum absolute error and the average absolute error of the improved method are 0.651 km and 0.334 km lower than those of the traditional method,respectively,which demonstrates that the improved method can effectively eliminate the influence of nonlinear factors and greatly improve the accuracy of fault location for the AT traction power network.Finally,combined with a shortcircuit test,the accuracy of the improved method is verified.

Static load test and load transfer mechanism study of squeezed branch and plate pile in collapsible loess foundation

As a special geological phenomenon, the character of collapsible loess foundation is collapsible when penetrated by water. This character leads to the soil losing load bearing capacity largely and may lead to foundation failure. Pile is a popular foundation used in collapsible loess. The squeezed branch and plate pile is a new type of pile developed in recent years and has not be used in a project before. In this paper three squeezed branch and plate piles are tested in collapsible loess after immersion processing. The results may be used for reference in similar construction project, and to provide theoretical references for de- signing of the squeezed branch and plate piles in engineering practice.

Discussion on bearing capacity of soft rock ground based on in-situ load test

The suitability of five methods was discussed here,taking the typical results from in-situ load test of Renshou Mansion and Caifu Plaza in Yueyang City for example.It shows that bearing capacity can be obtained by the proportion load and limit load from p-s curve with the first and the second point of contraflexure easily.It is recommended that the accurate value of bearing capacity can be obtained by hyperbola fitting method and minimum curvature radius method theoretically.The rebound method is clear in principle,in which the elastoplasticity characteristic is thought about.Out of consideration for the unsteadiness and unobviousness of bearing capacity from relative settlement method,it can be only adopted as reference.So bearing capacity of soft rock ground should be determined by weathering condition of soft rock and curve type.

Evolution of mechanical parameters of Shuangjiangkou granite under different loading cycles and stress paths

Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction angle.Additionally,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were obtained.The results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack strain.The stress path coefficient is exponentially related to the rock fracture degree difference coefficient.As the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease linearly.During cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding rocks.Finally,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed.

Structure design and load test of the small prototype for the JUNO Central Detector

Introduction The structure of the Jiangmen Underground Neutrino Observatory(JUNO)CentralDetector(CD)was designed using finite element methods(FEM).The structure of the small JUNOCDprototypewas also designed using the same structural scheme and method as those of the CD,and the load test was carried out after the accomplishment of structure design and manufacturing.Methods The load test can help verify the performance and reliability of the mechanical monitoring system and liquid filling system of the CD,verify the consistency of FEM calculations and axial force measurement results of the sensors,and accumulate experience for the installation of the connecting bars.Conclusion The measurement scheme was considered and determined,and the connecting bars’axial forces under different liquid filling conditions were measured and compared with the FEM results,the consistencies of which were good.The mechanical monitoring system and liquid filling system of theCDwere verified during the load test,which met the requirements of design and experiment.

Application of bi-directional static loading test to deep foundations

Bi-directional static loading test adopting load cells is widely used around the world at present, with increase in diameter and length of deep foundations. In this paper, a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism. The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant. Some new load cells, test procedure, and construction technology were adopted based on the applications to different deep foundations, which could enlarge the application scopes of bi-directional loading test. A new type of bi-directional loading test for pipe pile was conducted, in which the load cell was installed and loaded after the pipe pile with special connector has been set up. Unlike the conventional bi-directional loading test, the load cell can be reused and shows an evident economic benefit.

Load Reduction Test Method of Similarity Theory and BP Neural Networks of Large Cranes

Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

Trajectory generation of heat load test based on gauss pseudospectral method

A new trajectory generation for heat load test is proposed based on gauss pseudospectral method within limit range. Firstly,with multiple path constraints and flight task requirements taken into consideration, heat load parameters are introduced into the dynamics equations. In order to solve the problem of generating such a trajectory within limit range rapidly, the dynamics equations have been normalized by Earth related parameters. Secondly, since the gauss pseudospectral method is just employed to solve the discrete nonlinear programming problem, transformations are developed, which can relate the Lagrange multipliers of the discrete nonlinear programming problem to the costates of the continuous optimal control problem. In addtion, another approach of trajectory generation by tracking the given heat rate is also presented. Finally, simulation results with common aero vehicle(CAV-H) show that the trajectories obtained by both methods can well perform the heat load test with high stagnation heating rate and the large total aeroheating amount; meanwhile, gauss pseudospectral method is better than the compared one in the given range. Furthermore, the 3-D trajectory states and control variables, angle of attack and bank, which are generated by gauss pseudospectral method, can change smoothly.

Mechanical Properties of Deep-buried Marble Material Under Loading and Unloading Tests

The mechanical properties are essentially different when rock material is subjected to loading or unloading conditions. In this study, loading and unloading tests with various confining pressures are conducted to investigate the mechanical properties of marble material samples taken from the deep diversion tunnels of Jinping II Hydropower Station. The stress-strain relationship, failure characteristics and strength criterion are compared and analyzed based on the experiment results. The results show： in the loading and unloading test, peak strength, lateral strain, axial strain and plastic deformation increase significantly as the confining pressure increases. Lateral strain increased significantly and obvious lateral dilatancy can be observed to the change of confining pressure; The fracture mode is mainly the single shear fracture for the triaxial compression test and post-peak test, angle between the failure surface and the ends of the rock material becomes smaller as the confining pressure increases. Hock-Brown strength criterion reflects the strength characteristics of marble material under two different unloading conditions, and has some supplementary effects to the rock material of mechanical field.