Research progress of local characteristic drugs for treatment of rheumatoid arthritis in Xinjiang

Rheumatoid arthritis(RA)is a systemic autoimmune disease characterized by synovitis.This disease tends to recur,persist,and is difficult to cure.The pathogenesis of RA is complex.Currently,the commonly used treatments for RA—non-steroidal anti-inflammatory drugs(NSAIDs),disease-modifying anti-rheumatic drugs(DMARDs),glucocorticoids,and immunosuppressants—have notable side effects with long-term use and may be ineffective for some patients.Therefore,it is crucial to find drugs with limited side effects and significant curative effects.Xinjiang's local characteristic drugs have a long history,abundant resources,and are known for their safety and effectiveness in treating RA.In recent years,many studies have reported on the mechanisms of action and therapeutic effects of Xinjiang's local characteristic drugs on RA.This article reviews the pathogenesis of RA,as well as the research progress and treatment characteristics of Xinjiang-featured drugs.

Research on The Development of Derivative Products of Comic and Animation Advertising Video of Local Characteristic Culture

Rich historical and humanistic resources and local characteristic culture provides a wealth of material for creation of comic and animation.In recent years,animation industry of our country has achieved rapid development.However,the limitations of the traditional concept and the external environment make the development of derivative products of local characteristic culture comic and animation advertising video still exists many problems.It need to strengthen efforts of derivatives development of this field,clear animation market positioning,pay attention to intellectual property protection,make animation industry of our country in a state of benign development.

Local characteristics and acoustical energy of radiation on vibrating surface: Ⅰ. Theory

From a point of view of the auto-spectrum, the local characteristics and the acous-tical energy of radiating on a vibrating surface are theoretically studied in this paper. The point radiation impedance at any point on a vibrating surface is defined a-s the ratio of the sound pressure to the vibrating velocity, which establishes the relation between the vibration of the surface and the sound field. Applying the Cauchy iategral theorem, the chromatic disper-sion relation between the real and imaginary components of the point radiation impedance is given, and some characteristics are discussed. The discussion about two typical sound sotirces,pulsating and oscillating spheres, supports the arguments of this paper.

Local characteristics and acoustical energy of radiation on vibrating surface: Ⅱ. application

Applying the theory put forward in Ref. [3], the radiation mechanism of sound energy on a vibrating steel plate was studied. Between the point radiation resistance efficiency and the point radiation reactance efficiency exists the chromatic dispersion relation that is one to one. The chromatic dispersion relation fits not only smooth curves, but also the dispersed curves with sharp-pointed peaks. While the vibrating surface radiates the sound energy into field, it absorbs some energy from the field.

Comparison of the Bright Band Characteristics Measured by Micro Rain Radar (MRR) at a Mountain and a Coastal Site in South Korea

Data from a long term measurement of Micro Rain Radar （MRR） at a mountain site （Daegwallyeong, DG, one year period of 2005） and a coastal site （Haenam, HN, three years 2004-2006） in South Korea were analyzed to compare the MRR measured bright band characteristics of stratiform precipitation at the two sites. On average, the bright band was somewhat thicker and the sharpness （average gradient of reflectivity above and below the reflectivity peak） was slightly weaker at DG, compared to those values at HN. The peak reflectivity itself was twice as strong and the relative location of the peak reflectivity within the bright band was higher at HN than at DG. Importantly, the variability of these values was much larger at HN than at DG. The key parameter to cause these differences is suggested to be the difference of the snow particle densities at the two sites, which is related to the degree of riming. Therefore, it is speculated that the cloud microphysical processes at HN may have varied significantly from un-rimed snow growth, producing low density snow particles, to the riming of higher density particles, while snow particle growth at DG was more consistently affected by the riming process, and therefore high density snow particles. Forced uplifting of cloudy air over the mountain area around DG might have resulted in an orographic supercooling effect that led to the enhanced riming of supercooled cloud drops.

Numerical Study on Heat Transfer and Flow Characteristics for Laminar Flow in a Circular Tube with Swirl Generators

This study investigated the heat transfer and flow characteristics of one kind of swirlgenerator in a circular heat exchanger tube through a numericalsimulation. The swirlflow induced by this type of swirlgenerator can obtain a high heat transfer rate with minimalpressure drop penalty. The simulations were carried out to understand the physicalbehavior of this kind of mesoscale heat enhancement component. By visualizing the heat transfer and flow characteristics, it is found that the swirlflow is induced by swirlgenerator in the circular tube couples with the impinging jet effect. After passing through the swirlgenerator, the localfriction factor of liquid can quickly return to lower levelmore quickly, while the localNusselt number maintains higher values for a distance; thus, the evaluation criterion of localperformance is improved. Single-factor optimization is used for three geometric parameters, i.e., the angle of swirlgenerator(25o, 45o, and 60o), the length of swirlgenerator(0.005, 0.01, and 0.02 m), and the center rod radius(1, 2, and 3 mm). The optimum parameters of the swirlgenerator for laminar flow of air in a circular tube are obtained, which should be 60o, 0.005 m, and 3 mm, respectively.

Exterior Quality and Physical Properties of Hongda Tobacco in Yunnan Province

[Objective] The aim was to analyze the exterior quality and physical prop- erties of Hongda Tobacco in Yunnan Province, thus providing references for planting planning, technology and selection of raw materials. [Method] Hongda C3F progenies were chosen from 24 villages and towns in Qujing, Kunming, Baoshan and Dali, and the concerning exterior quality and physical properties were analyzed through cluster analysis. [Result] The openness and width of C3F differed significantly among Qujing, Kunming, Baoshan and Dali. The thickness, stem content, equilibrium moisture con- tent extremely differed, and density and filling power varied significantly. Most physi- cal properties, such as equilibrium moisture content and density, of Dali Hongda were quite different from those in Qujing, Kunming and Baoshan, indicating that Dali Hongda enjoys special characteristics in physical properties. In addition, stem content in east, center and west areas of Yunnan Province differed significantly and Hongda in Yunnan could be classified into four species according to physical property. [Conclusion] The research has laid basis for planting planning, technology and raw mate- rials selection of Hongda tobacco.

Revisiting and Rethinking Regional Urbanization in Changjiang River Delta,China

China is entering a critical and accelerating phase of urbanization.As one of the most urbanized regions in China,the Changjiang(Yangtze)River Delta has experienced dramatic urbanization and urban transformation.However,in the recent years,many changes have taken place in this region and there is limited attention to the regional urbanization path evolution,its problems and the way to solve these problems.Therefore,we should revisit the urbanization process in the Changjiang River Delta again.In this paper,we revisited urbanization paths of the Changjiang River Delta by data analysis,influence factors of urbanization by the Gray Relational Analysis,and major challenges to urbanization of the Changjiang River Delta by theoretical considerations.We found that the urbanization of the Changjiang River Delta had experienced several stages of large-scale spatial and urban system restructuring.Within the Changjiang River Delta,Shanghai,Zhejiang and Jiangshu had experienced different urbanization path with local characteristics.But with their development model gradually converging,their urbanization model is also converging.We also found that the major influence factors affecting the Changjiang River Delta urbanization were dynamic change and urbanization was driven by different key factors in different socio-economic development stages.Meanwhile,the Changjiang River Delta urbanization is facing many problems such as existing institutional arrangements,including the hukou(household registration)system and others which can not meet the needs of current socioeconomic development and urbanization.Therefore,it is imperative to promote institutional innovation and adopt a new urbanization development strategy for the sake of the orderly and sustainable urbanization development in the Changjiang River Delta.

Non-contact of Solutions to Stochastic Differential Equations Driven by Semimartingale with Non-Lipschitz Coefficients

A class of stochastic differential equations(SDEs) driven by semimartingale with non-Lipschitz coefficients was studied.By using Gronwall inequality,the non-confluence of solutions is proved under the general conditions.

A Novel Cross-section Interpolation Method for Medical Images

Image interpolation of cross-sections is one of the key steps of medical visualization, and the cubic convolution interpolation is usually employed due to its good tradeoff between computational cost and accuracy, however, sometimes its accuracy can still not meet the requirement. Aimed at the problem, in this paper, the interpolation principle based cubic convolution is firstly analyzed systematically, and then essential relationship among the different cubic convolution interpolation methods is clarified. Lastly, a novel cross-section interpolation method for medical images that is based on the optimal parameter of sharp control is presented. The method takes full advantage of the local characteristic of medical images, and the optimized sharp control parameter is obtained by the iterative computation, and then the cross-section interpolation is performed by the cubic convolution with the optimized parameter in one time.The experimental results show that the method presented in the paper not only can improve the interpolation accuracy effectively, but also is robust.

Influence of earthquake ground motion incoherency on multi-support structures

A linear response history analysis method is used to determine the influence of three factors:geometric incoherency,wave-passage,and local site characteristics on the response of lnulti-support structures subjected to differential ground motions.A one-span frame and a reduced model of a 24-span bridge,located in Las Vegas,Nevada are studied,in which the influence of each of the three factors and their combinations are analyzed.It is revealed that the incoherency of earthquake ground motion can have a dramatic influence on structural response by modifying the dynamics response to uniform excitation and inducing pseudo-static response,which does not exist in structures subjected to uniform excitation.The total response when all three sources of ground motion incoherency are included is generally larger than that of uniform excitation.

浅析《上海市建筑节能条例》

《上海市建筑节能条例》即将施行,围绕突出地方特色、凸显重点环节、注重可操作性、引导公众参与等四个方面解释了条例的主要内容。

Research on acoustic emission characteristics of local corrosion on Q235 steel

To solve the problem of corrosion acoustic emission （AE） source feature extraction and recognition, the AE detection validation and the amplitude-frequency characteristics were derived in theory. The amplitude of AE signal generated by bubble burst is proportional to its radius square and the liquid level, while the AE signal frequency is inversely proportional to the bubble radius. The AE signal amplitude of the steel and the steel corrosion product cracking is proportional to the local stress, and the AE signal frequency is proportional to the crack propagation velocity and inversely proportional to the crack propagation distance. Three Q235 specimens were separately immersed in the solution of 10% FeC13.6H20, 5% CuSOa.5H20 and 10% FeC13.6H20 with 0.01 mol/L HCL. The AE systems with high frequency and low frequency were used to detect the whole corrosion process AE signals. The AE signals of Q235 steel and the steel corrosion products cracking were detected as the verification experiment. The AE signals from different sources could be distinguished by AE hits count and the power spectrum. It is coincident with theoretical analysis. These conclusions have significant guidance for the corrosion detection and evaluation by on-line acoustic emission detecting.

Magnetic Tile Surface Defect Detection Based on Texture Feature Clustering

In the field of magnetic tile surface detection, artificial detection efficiency is low, and the traditional image segmentation algorithm cannot show good performance when the gray scale of the magnetic tile itself is small, or the image is affected by uneven illumination. In view of these questions, this paper puts forward a new clustering segmentation algorithm based on texture feature. This algorithm uses Gabor function spectra to represent magnetic tile surface texture and then uses a user-defined local product coefficient to modify Gabor energy spectra to get the center number of fuzzy C-means(FCM) clustering. Moreover, the user-defined Gabor energy spectra image is segmented by clustering algorithm. Finally, it extracts the magnetic tile surface defects according to the changes of regional gray characteristics. Experiments show that the algorithm effectively overcomes the noise interference and makes a good performance on accuracy and robustness, which can effectively detect crack,damage, pit and other defects on the magnetic tile surface.

RELATIONS BETWEEN SOLUTIONS TO STOCHASTIC DIFFERENTIAL EQUATIONS DRIVEN BY SEMIMARTINGALE WITH NON-LIPSCHITZ COEFFICIENTS

In this paper, a class of stochastic differential equations (SDEs) driven by semi-martingale with non-Lipschitz coefficients is studied. We investigate the dependence of solutions to SDEs on the initial value. To obtain a continuous version, we impose the conditions on the local characteristic of semimartingale. In this case, it gives rise to a flow of homeomorphisms if the local characteristic is compactly supported.