Securing offshore resources development:A mathematical investigation into gas leakage in long-distance flexible pipes

Gas flexible pipes are critical multi-layered equipment for offshore oil and gas development.Under high pressure conditions,small molecular components of natural gas dissolve into the polymer inner liner of the flexible pipes and further diffuse into the annular space,incurring annular pressure build-up and/or production of acidic environment,which poses serious challenges to the structure and integrity of the flexible pipes.Gas permeation in pipes is a complex phenomenon governed by various factors such as internal pressure and temperature,annular structure,external temperature.In a long-distance gas flexible pipe,moreover,gas permeation exhibits non-uniform features,and the gas permeated into the annular space flows along the metal gap.To assess the complex gas transport behavior in long-distance gas flexible pipes,a mathematical model is established in this paper considering the multiphase flow phenomena inside the flexible pipes,the diffusion of gas in the inner liner,and the gas seepage in the annular space under varying permeable properties of the annulus.In addition,the effect of a variable temperature is accounted.A numerical calculation method is accordingly constructed to solve the coupling mathematical equations.The annular permeability was shown to significantly influence the distribution of annular pressure.As permeability increases,the annular pressure tends to become more uniform,and the annular pressure at the wellhead rises more rapidly.After annular pressure relief followed by shut-in,the pressure increase follows a convex function.By simulating the pressure recovery pattern after pressure relief and comparing it with test results,we deduce that the annular permeability lies between 123 and 512 m D.The results help shed light upon assessing the annular pressure in long distance gas flexible pipes and thus ensure the security of gas transport in the emerging development of offshore resources.

Characteristics of long-distance mobile mRNAs from shoot to root in grafted plant species

Thousands of long-distance mobile mRNAs were identified from different grafting systems,based on high-throughput sequencing technology.Moreover,the long-distance delivery of RNAs was proved to involve multiple mechanisms.Here,we analyzed the homology,motif,and tRNA-like structure(TLS)of long-distance mobile mRNAs identified by RNA-seq as well as the RNA-binding protein(RBP)in nine grafting combinations including Arabidopsis thaliana,Vitis vinifera,Cucumis sativus,Citrullus lanatus,Nicotiana benthamiana,Malus domestica,Pyrus spp.,Glycine max and Phaseolus vulgaris.Although several mRNAs were found to be shared in herbaceous,woody,and related species,the vast majority of long-distance mobile mRNAs were species-specific.Four non-specific movement-related motifs were identified,while the TLS was not necessary for mRNA long distance mobility.In addition,we found that RBPs were conserved among herbaceous and woody plants as well as related species.This paper reports a further in-depth analysis of the endogenous mechanisms by which the species-specific transportable m RNAs were selected by bioinformatics,in order to provide insights for future research on long-distance mobile mRNAs.

High-Performance Sodium Bose-Einstein Condensate Apparatus with a Hybrid Trap and Long-Distance Magnetic Transfer

We report on the production of large sodium Bose^Einstein condensates in a hybrid of magnetic quadrupole and optical dipole trap. With an optimized spin-flip Zeeman slower, 2 ~ 1010 sodium atoms are captured in the magneto-optical trap （MOT）. A long distance magnetic transfer setup moves the cold atom over 46cm from the MOT chamber to the UHV science chamber, which provides great optical access and long conservative trap lifetime. After evaporative cooling in the hybrid trap, we produce nearly pure condensates of 1 ~ 107 atoms with lifetime of 80 s in the optical dipole trap.

Intelligent Power Grid Load Transferring Based on Safe Action-Correction Reinforcement Learning

When a line failure occurs in a power grid, a load transfer is implemented to reconfigure the network by changingthe states of tie-switches and load demands. Computation speed is one of the major performance indicators inpower grid load transfer, as a fast load transfer model can greatly reduce the economic loss of post-fault powergrids. In this study, a reinforcement learning method is developed based on a deep deterministic policy gradient.The tedious training process of the reinforcement learning model can be conducted offline, so the model showssatisfactory performance in real-time operation, indicating that it is suitable for fast load transfer. Consideringthat the reinforcement learning model performs poorly in satisfying safety constraints, a safe action-correctionframework is proposed to modify the learning model. In the framework, the action of load shedding is correctedaccording to sensitivity analysis results under a small discrete increment so as to match the constraints of line flowlimits. The results of case studies indicate that the proposed method is practical for fast and safe power grid loadtransfer.

Long-distance quantum state transfer through cavity-assisted interaction

We propose a scheme for long-distance quantum state transfer between different atoms based on cavity-assisted interactions. In our scheme, a coherent optical pulse sequentially interacts with two distant atoms trapped in separated cavities. Through the measurement of the state of the first atom and the homodyne detection of the final output coherent light, the quantum state can be transferred into the second atom with a success probability of unity and a fidelity of unity. In addition, our scheme neither requires the high-Q cavity working in the strong coupling regime nor employs the single-photon quantum channel, which greatly relaxes the experimental requirements.

Brachioradialis tendon transfer and palmaris longus tendon graft for thumb avulsion:A case report and review of literature

BACKGROUND Thumb replantation following complete traumatic avulsion requires complex techniques to restore function,especially in cases of avulsion at the level of the metacarpophalangeal joint(MCP I)and avulsion of the flexor pollicis longus(FPL)at the musculotendinous junction.Possible treatments include direct tendon suture or tendon transfer,most commonly from the ring finger.To optimize function and avoid donor finger complications,we performed thumb replantation with flexion restoration using brachioradialis(BR)tendon transfer with palmaris longus(PL)tendon graft.CASE SUMMARY A 20-year-old left-handed male was admitted for a complete traumatic left thumb amputation following an accident while sliding from the top of a handrail.The patient presented with skin and bone avulsion at the MCP I,avulsion of the FPL tendon at the musculotendinous junction(zone 5),avulsion of the extensor pollicis longus tendon(zone T3),and avulsion of the thumb’s collateral arteries and nerves.The patient was treated with two stage thumb repair.The first intervention consisted of thumb replantation with MCP I arthrodesis,resection of avulsed FPL tendon and implantation of a silicone tendon prosthesis.The second intervention consisted of PL tendon graft and BR tendon transfer.Follow-up at 10 months showed good outcomes with active interphalangeal flexion of 70°,grip strength of 45 kg,key pinch strength of 15 kg and two-point discrimination threshold of 4 mm.CONCLUSION Flexion restoration after complete thumb amputation with FPL avulsion at the musculotendinous junction can be achieved using BR tendon transfer with PL tendon graft.

Simulation of long-distance pipeline transportation properties of whole-tailings paste with high sliming

Based on Bingham rheological model,a three-dimensional numerical simulation model for long-distance pipeline transportation is established by computational fluid dynamics(CFD)to study the pipeline transportationproperties of high sliming paste from a copper mine in China.Based on the rheological properties test,the pressure and velocity of pipeline and elbow are simulated by CFD under different mass concentrations and different stowing capacities.The results show that the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with high sliming and pumping agent at the same mass concentration,and the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with low sliming while without pumping agent.It is very important to add pumping agent to whole-tailings paste with high sliming,and the resistance changes with mass concentration and stowing capacity at the same cement-to-sand ratio of1:5and tailings-to-waste ratio of6:1.However,the change is just limited,that is to say,the paste transportation system is of good stability.Furthermore,at the elbow,the maximum pressure and velocity transfer to the outside of the pipe from the inside.However,lubricating layer is formed at the pipe wall because of high content of fine particles in whole-tailings paste,which will protect the elbow from abrasion.CFD provides an intuitive and accurate basis for pipeline transportation study,and would have a wider application space in the study of paste rheological properties and resistance reduction methods.

Water hammer protection for diversion systems in front of pumps in long-distance water supply projects

For a water supply system with long-distance diversion pipelines, in addition to the water hammer problems that occur beyond pumps, the safety of the water diversion pipeline in front of pumps also deserves attention. In this study, a water hammer protection scheme combined with an overflow surge tank and a regulating valve was developed. A mathematical model of the overflow surge tank was developed, and an analytical formula for the height of the overflow surge tank was derived. Furthermore, a practical water supply project was used to evaluate the feasibility of the combined protection scheme and analyze the sensitivity of valve regulation rules. The results showed that the combined protection scheme effectively reduced the height of the surge tank, lessened the difficulties related to construction, and reduced the necessary financial investment for the project. The two-stage closing rule articulated as fast first and then slow could minimize the overflow volume of the surge tank when the power failure occurred, while the two-stage opening rule articulated as slow first and then fast could be more conducive to the safety of the water supply system when the pump started up.

A scheme for transferring an unknown atomic entangled state via cavity quantum electrodynamics

In this paper, we propose a scheme for transferring an unknown atomic entangled state via cavity quantum electrodynamics （QED）. This scheme, which has a successful probability of 100 percent, does not require Bell-state measurement and performing any operations to reconstruct an initial state. Meanwhile, the scheme only involves atomfield interaction with a large detuning and does not require the transfer of quantum information between the atoms and cavity. Thus the scheme is insensitive to the cavity field states and cavity decay. This scheme can also be extended to transfer ring an entangled state of n-atom.

Study on the Technology of Supplying Water Safely by Long-Distance Pipeline

The extensively built long-distance water transmission pipelines have become the main water sources for urban areas. To ensure the reliability and safety of the water supply, from the viewpoint of overall management, it would be necessary to establish a system of information management for the pipeline. The monitoring, calculating and analyzing functions of the system serve to give controlling instructions and safe operating rules to the automatic equipment and technician, making sure the resistance coefficient distribution along the pipeline is reasonable; the hydraulic state transition is smooth when operating conditions change or water supply accidents occur, avoiding the damage of water hammer. This paper covered the composition structures of the information management system of long-distance water transmission pipelines and the functions of the subsystems, and finally elaborated on the approaches and steps of building a mathematics model for the analysis of dynamic hydraulic status.

Study on the long-distance target apperception techniques for underwater vehicles

The limited physical size for autonomous underwater vehicles （AUV） or unmanned underwater vehicles （UUV） makes it difficult to acquire enough space gain for localizing long-distance targets. A new technique about long-distance target apperception with passive synthetic aperture array for underwater vehicles is presented. First, a synthetic aperture-processing algorithm based on the FFT transform in the beam space （BSSAP） is introduced. Then, the study on the flank array passive long-distance apperception techniques in the frequency scope of 11-18 kHz is implemented from the view of improving array gains, detection probability and augmenting detected range under a certain sea environment. The results show that the BSSAP algorithm can extend the aperture effectively and improve detection probability. Because of the augment of the transmission loss, the detected range has the trend of decline with the increase of frequency under the same target source level. The synthesized array could improve the space gain by nearly 7 dB and SNR is increased by about 5 dB. The detected range is enhanced to nearly 2 km under the condition of 108-118 dB of the target source level for AUV system in measurement interval of nearly 1 s.

Influencing Factors of Householders' Transferring out Cultivated Land under the Background of Urban and Rural Integration

Factors influencing householders' transferring out the cultivated land are analyzed from the aspects of farmers' individual characteristics,farmers' family features,resources endowment features and external environmental features.And based on the results of the questionnaire survey of 252 households in Chengdu City,the effect of each factor is analyzed through building the dual preference model of Logistic.The result shows that 65.87% of householders have transferred out their cultivated land and proportion of non-agricultural incomes,stability of land ownership,per capita area of cultivated farmland,comminution of cultivated farmland,transferring price and distance to town have relatively significant effect on farmers' transferring out cultivated land.Non-agricultural industries should be developed with great efforts and reasonable transferring prices of cultivated land fixed.Law on Land Contract in Rural Area is to be practically implemented and the steady peasants' vocational skill training system and rural social security system established.Moreover,investment in rural infrastructure should be strengthened to improve the transportation conditions in rural area and promote the market development of cultivated land transference effectively.

Long-distance propagation of pseudo-partially coherent Gaussian Schell-model beams in atmospheric turbulence

Propagation properties of spatially pseudo-partially coherent Gaussian Schell-model beams through the atmo- spheric turbulence over a long-distance uplink path are studied by numerical simulation. A linear coordination trans- formation is introduced to overcome the window effect and the loss-of-resolution problem. The beam spreading, beam wandering, and intensity scintillation as functions of turbulence strength, source correlation length, and change fre- quency of random phase that models the partial coherence of the source are analyzed. It is found that the beam spreading and the intensity scintillation of the partially coherent beam are less affected by the turbulence than those of the coherent one, but it suffers from a more severe diffractive effect, and the change frequency of random phase has no evident influence on it. The beam wandering is insensitive to the variation of source correlation length, and decreases firstly then goes to a fixed value as the change frequency increases.

Improvement of heat-tolerance by training I. Evaluation of effects of long-distance running and march training on heat-tolerance

in order to verify the heat-tolerance effect, two trainings, 90 min marching with load (WBGT 24. 6～35.6℃) and 10 km running (WBGT 25.0～31.1℃) were performed in laboratory and field under hot climate.Ten to twelve times (days) of training were carried out

Sap-flow measurement and scale transferring from sample trees to entire forest stand of Populus euphratica in desert riparian forest in extreme arid region

Understanding how the transpiration of this vegetation type responds to environmental stress is important for determining the wa-ter-balance dynamics of the riparian ecosystem threatened by groundwater depletion. Transpiration and sap flow were measured using the heat-pulse technique. The results were then projected up to the stand level to investigate the stand’s water-use in relation to climate forcing in the desert riparian forest in an extreme arid region. This study took place from April through October 2003 and from May through October 2004. The experimental site was selected in the Populus euphratica Forest Reserve (101o10' E, 41o59' N) in Ejina county, in the lower Heihe River basin, China. The sapwood area was used as a scalar to extrapolate the stand-water consumption from the whole trees’ water consumption measured by the heat-pulse velocity recorder (HPVR). Scale transferring from a series of individual trees to a stand was done according to the existing natural variations between trees under given environmental conditions. The application of the biometric parameters available from individual tree and stand levels was proved suitable for this purpose. A significant correlation between the sapwood area and tree diameter at breast height (DBH) was found. The prediction model is well fitted by the power model. On the basis of the prediction model, the sapwood area can be cal-culated by DBH. The sap-flow density can then be used to extrapolate the stand-water use by means of a series of mathematical models.

Continuously transferring cold atoms in caesium double magneto-optical trap

We have established a caesium double magneto-optical trap （MOT） system for cavity-QED experiment, and demonstrated the continuous transfer of cold caesium atoms from the vapour-cell MOT with a pressure of - 1 × 10^-6 Pa to the ultra-high-vacuum （UHV） MOT with a pressure of - 8 × 10^-8 Pa via a focused continuous-wave transfer laser beam. The effect of frequency detuning as well as the intensity of the transfer beam is systematically investigated, which makes the transverse cooling adequate before the atoms leak out of the vapour-cell MOT to reduce divergence of the cold atomic beam. The typical cold atomic flux got from vapour-cell MOT is - 2 × 10^7 atoms/s. About 5 × 10^6 caesium atoms are recaptured in the UHV MOT.

Is it necessary to use the entire root as a donor when transferring contralateral C7 nerve to repair median nerve？

If a partial contralateral C7 nerve is transferred to a recipient injured nerve, results are not satisfactory. However, if an entire contralateral C7 nerve is used to repair two nerves, both recipient nerves show good recovery. These findings seem contradictory, as the above two methods use the same donor nerve, only the cutting method of the contralateral C7 nerve is different. To verify whether this can actually result in different repair effects, we divided rats with right total brachial plexus injury into three groups. In the entire root group, the entire contralateral C7 root was transected and transferred to the median nerve of the affected limb. In the posterior division group, only the posterior division of the contralateral C7 root was transected and transferred to the median nerve. In the entire root ＋ posterior division group, the entire contralateral C7 root was transected but only the posterior division was transferred to the median nerve. After neurectomy,the median nerve was repaired on the affected side in the three groups. At 8, 12, and 16 weeks postoperatively, electrophysiological examination showed that maximum amplitude, latency, muscle tetanic contraction force, and muscle fiber cross-sectional area of the flexor digitorum superficialis muscle were significantly better in the entire root and entire root ＋ posterior division groups than in the posterior division group. No significant difference was found between the entire root and entire root ＋ posterior division groups. Counts of myelinated axons in the median nerve were greater in the entire root group than in the entire root ＋ posterior division group, which were greater than the posterior division group. We conclude that for the same recipient nerve, harvesting of the entire contralateral C7 root achieved significantly better recovery than partial harvesting, even if only part of the entire root was used for transfer. This result indicates that the entire root should be used as a donor when transferring contralateral C7 nerve.

Transferring Few-Layer Graphene Sheets on Hexagonal Boron Nitride Substrates for Fabrication of Graphene Devices

We have developed a dry transfer method that allows graphene to be transferred from polymer- thyl-methacrylate (PMMA)/Si (silicon) substrates on commercially available hexagonal boron ni- tride (hBN) crystals. With this method we are able to fabricate graphene devices with little wrin- kles and bubbles in graphene sheets, but that do not degrade the electronic quality more than the SiO2 substrate does. For hBN to perform the function described above substrate cleanliness is critical to get high quality graphene devices. Using hBN as a substrate, graphene exhibits enhanced mobility, reduced carrier inhomogeneity, and reduced intrinsic doping compared to graphene on SiO2 substrate.

Influencing Factors of Seed Long-distance Dispersal on a Fragmented Forest Landscape on Changbai Mountains,China

Seed long-distance dispersal(LDD) events are typically rare, but are important in the population processes that determine large-scale forest changes and the persistence of species in fragmented landscapes. However, previous studies focused on species dispersed via animal-mediated LDD, and ignored those dispersed by wind. The aim of this study was to assess the effects of canopy openness, edge, seed source, and patch tree density on the LDD of seeds by wind in forest. We collected birch seeds, a typical wind-dispersed species, throughout a larch plantation. We then assessed the relationship between birch LDD and each factor that may influence LDD of seeds by wind including distance to edge, canopy openness size, distance to mature forest, and the tree density of the larch plantation. We used univariate linear regression analysis to assess the influence of those factors on birch LDD, and partial correlations to calculate the contribution of each factor to LDD. The results showed that both canopy openness and edge had significant influences on birch LDD. Specifically, a negative relationship was observed between distance to edge and birch LDD, whereas there was a positive correlation between canopy openness size and LDD. In contrast, the distance to the mature forest was not correlated with birch LDD. Our results suggest that patch tree density could potently affect the probability of LDD by wind vectors, which provides novel and revealing insights regarding the effect of fragmentation on wind dynamics. The data also provide compelling evidence for the previously undocumented effect of habitat fragmentation on wind-dispersed organisms. As such, these observations will facilitate reasonable conservation planning, which requires a detailed understanding of the mechanisms by which patch properties hamper the delivery of seeds of wind-dispersed plants to fragmented areas.

Criterions and Measures of Route Selection of Shallowly Embedded Long-Distance Oil and Gas Pipeline in Mountain Areas

According to the engineering investigation of long-distance oil and gas pipelines, the criterions and measures of route selection are drawn as follows： the flat landform is the first choice in route alignment. The foot of mountain is the first choice when the route passes by the valley. The route should pass by but the shady and deposited slope and not in sunny and erosive slope as possible as it can. The pipeline should be vertical to contour climbing and descending the mountain except steep slope. Tunnel can be used in crossing foothill. Perpendicularly traversing the river is better than beveling; the worst choice is to put the pipeline along the river. Bypass is the best choice in karsts area. The order of route selection should be pre-choosing, investigation, optimization and adjustment.