期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Lorentz detuning and tuning system study of 3+1/2cell DC-SC photo-injector for PKU-FEL
1
作者 徐文灿 全胜文 +1 位作者 赵夔 朱凤 《Chinese Physics C》 SCIE CAS CSCD 北大核心 2008年第3期215-217,共3页
A 3+1/2cell DC-SC photo-injector for PKU-FEL facility is under development, which is an upgrade design of the successful 1-4-1/2cell DC-SC photo-injector. The Lorentz detuning and tuning structure for the 3+1/2cell ... A 3+1/2cell DC-SC photo-injector for PKU-FEL facility is under development, which is an upgrade design of the successful 1-4-1/2cell DC-SC photo-injector. The Lorentz detuning and tuning structure for the 3+1/2cell superconducting cavity is presented in this paper. The Lorentz force detuning coefficient is 1.2 Hz/(MV/m)^2 with double stiffening rings for the half cell and single stiffening rings between the adjacent TESLA cells. With the special stiffening structure, the 3+1/2cell whole cavity needs only one tuner. The influences of the tuning on frequency shift, field flatness and average gradient are discussed in this paper. The simulation results show that the stiffening rings' design is successful. 展开更多
关键词 3+1/2cell DC-SC photo-injector lorentz detuning tuning structure
原文传递
Study on the Lorentz detuning and tuning of β=0.3,352 MHz spoke cavity
2
作者 肖永川 傅世年 《Chinese Physics C》 SCIE CAS CSCD 2009年第9期815-818,共4页
The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of the high power proton linac for the Accelerator Driven Sub-critical System in China. In this paper, the basic ge... The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of the high power proton linac for the Accelerator Driven Sub-critical System in China. In this paper, the basic geometric and RF parameters of a β=0.3, 352 MHz spoke cavity are given, and the Lorenz detuning and tuning are presented. 展开更多
关键词 lorentz force detuning spoke cavity proton linac
原文传递
Structural analysis of quarter-wave resonators in IMP
3
作者 张聪 贺守波 +3 位作者 王若旭 张生虎 何源 赵红卫 《Chinese Physics C》 SCIE CAS CSCD 2013年第10期78-82,共5页
The taper-shaped superconducting quarter wave resonators with frequency of 80.5 MHz, β of 0.041 and 0.085 have been pre-researched. The radio frequency (RF) design of the cavities has been completed, and the struct... The taper-shaped superconducting quarter wave resonators with frequency of 80.5 MHz, β of 0.041 and 0.085 have been pre-researched. The radio frequency (RF) design of the cavities has been completed, and the structural design is also an important aspect which will be discussed in the following. The frequency shift caused by the etching effects of the surface treatment, the helium bath pressure and the Lorentz force, and the mechanical modes caused by the microphonic excitation have been anMyzed. The results show that the frequency variation from the Lorentz force is not serious and stiffening rings are explored aimed at decreasing the deformation brought by the helium pressure and microphonic excitation. 展开更多
关键词 quarter-wave resonator structural stability etching effect lorentz force detuning helium pressuredetuning mechanical vibration
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部