A Diagnostic Study on the Relationship between the Assembling of Low Frequency Waves in the Pacific Ocean and the Abnormality of the Subtropical High

By use of the filter analysis technique, the Complex Empirical Othogonal Function (CEOF) method and the ECMWF/WMO 2.5°×2.5°grid data of the geopotential heights during the summer months in 1988, an interseasonal process that the western Pacific subtropical high (WPSH) was anomalously far to the north in the first and second ten days of July is studied. It has been found that in the western Pacific subtropical region in the first and second ten days of July,it is the continuous assembly of low frequency geopotential waves (LFGWs) that leads to the abnormality of WPSH. This abnormality emerges with the enhancement of wave assembling and ceases while the wave assembling situation disappears. The structure of the low frequency assembling waves corresponds to the structure of subtropical high in its abnormal period. The effect of the assembling waves on the abnormality of subtropical high can be considered as the accumulation of disturbance energy carried by the low frequency waves from different directions in the western Pacific region.

Precision measurement and suppression of low-frequency noise in a current source with double-resonance alignment magnetometers

Low-noise high-stability current sources have essential applications such as neutron electric dipole moment measurement and high-stability magnetometers. Previous studies mainly focused on frequency noise above 0.1 Hz while less on the low-frequency noise/drift. We use double resonance alignment magnetometers(DRAMs) to measure and suppress the low-frequency noise of a homemade current source(CS) board. The CS board noise level is suppressed by about 10 times in the range of 0.001-0.1 Hz and is reduced to 100 n A/√Hz at 0.001 Hz. The relative stability of CS board can reach2.2 × 10^(-8). In addition, the DRAM shows a better resolution and accuracy than a commercial 7.5-digit multimeter when measuring our homemade CS board. Further, by combining the DRAM with a double resonance orientation magnetometer,we may realize a low-noise CS in the 0.001-1000 Hz range.

Deformation characteristics and novel strain criteria of strainbursts induced by low-frequency cyclic disturbance

Strainbursts induced by cyclic disturbance with low frequency(termed as cyclicinduced strainbursts)are major dynamic disasters during deep excavation and mining.There is currently no quantitative criterion available for the prediction of such disastrous events.In this study,based on true triaxial experiments,we analyzed the deformation characteristics,established two novel strain criteria for the cyclic-induced strainbursts,and explained the physical meaning of these criteria.Characteristic strains for the cyclic-induced strainbursts were defined,including the control strain ε_(ctr),the strain caused by the combined dynamic and static loading ε_(sd),and the ultimate strain ε_(u) after strainbursts.As indicated by the results,the deformation evolution of the cyclic-induced strainbursts shows remarkable fatigue characteristics,which resemble that of rock subjected to cyclic loading and unloading.In other words,there are three stages during deformation evolution,namely,initial rapid growth,uniform velocity growth after several periods of disturbance,and sudden sharp growth preceding the burst.The ultimate strain ε_(u) is insensitive to the tangential static stress and disturbance amplitude,but it changes nonlinearly with disturbance frequency.From the perspective of deformation,the occurrence of a cyclic-induced strainburst is controlled by the control strainε_(ctr).Thus,a control strain criterion is proposed;that is,when the stain ε_(sd) is larger than the control strain ε_(ctr),a strainburst will be induced by cyclic disturbance.Moreover,based on the statistical results,a strain ratio criterion is proposed;that is,when the strain ratio ε_(sd)/ε_(u) is greater than 30%,a cyclic-induced strainburst will be induced.

TRPV4-induced Neurofilament Injury Contributes to Memory Impairment after High Intensity and Low Frequency Noise Exposures

Objective Exposure to high intensity, low frequency noise(HI-LFN) causes vibroacoustic disease(VAD),with memory deficit as a primary non-auditory symptomatic effect of VAD. However, the underlying mechanism of the memory deficit is unknown. This study aimed to characterize potential mechanisms involving morphological changes of neurons and nerve fibers in the hippocampus, after exposure to HILFN.Methods Adult wild-type and transient receptor potential vanilloid subtype 4 knockout(TRPV4^(-/-)) mice were used for construction of the HI-LFN injury model. The new object recognition task and the Morris water maze test were used to measure the memory of these animals. Hemoxylin and eosin and immunofluorescence staining were used to examine morphological changes of the hippocampus after exposure to HI-LFN.Results The expression of TRPV4 was significantly upregulated in the hippocampus after HI-LFN exposure. Furthermore, memory deficits correlated with lower densities of neurons and neurofilamentpositive nerve fibers in the cornu ammonis 1(CA1) and dentate gyrus(DG) hippocampal areas in wildtype mice. However, TRPV4^(-/-)mice showed better performance in memory tests and more integrated neurofilament-positive nerve fibers in the CA1 and DG areas after HI-LFN exposure.Conclusion TRPV4 up-regulation induced neurofilament positive nerve fiber injury in the hippocampus,which was a possible mechanism for memory impairment and cognitive decline resulting from HI-LFN exposure. Together, these results identified a promising therapeutic target for treating cognitive dysfunction in VAD patients.

A direct laser-synthesized magnetic metamaterial for low-frequency wideband passive microwave absorption

Microwave absorption in radar stealth technology is faced with challenges in terms of its effectiveness in low-frequency regions.Herein,we report a new laser-based method for producing an ultrawideband metamaterial-based microwave absorber with a highly uniform sheet resistance and negative magnetic permeability at resonant frequencies,which results in a wide bandwidth in the L-to S-band.Control of the electrical sheet resistance uniformity has been achieved with less than 5%deviation at 400Ωsq^(-1)and 6%deviation at 120Ωsq^(-1),resulting in a microwave absorption coefficient between 97.2%and 97.7%within a1.56–18.3 GHz bandwidth for incident angles of 0°–40°,and there is no need for providing energy or an electrical power source during the operation.Porous N-and S-doped turbostratic graphene 2D patterns with embedded magnetic nanoparticles were produced simultaneously on a polyethylene terephthalate substrate via laser direct writing.The proposed low-frequency,wideband,wide-incident-angle,and high-electromagnetic-absorption microwave absorber can potentially be used in aviation,electromagnetic interference(EMI)suppression,and 5G applications.

The Seasonal Climate and Low Frequency Oscillation in the Simulated Mid-Holocene Megathermal Climate

The mid—Holocene climate about 6000 years ago was simulated by using the atmospheric general circulation model. The orbital parameters for 6 ka BP (before present) were prescribed and other forcing factors were set in the modern conditions. Results show that the large—scale climate change in the African—Asian monsoon areas during the summer—time is strongly compared to the present climate, while the changes in other seasons and regions are generally weak. The results also revealed the change of the low frequency oscillation in the atmosphere. Key words Seasonal climate - Low frequency oscillation - Mid—Holocene This research was jointly supported by the National Natural Science Foundation of China (NSFC) key project “ Variation of Paleo—environment over East Asia and Its Dynamic Relation with the Global Change” under contract 49894170 and the NSFC project “ Coupling of the AGCM with an Biome Model and the Simulation on the Mid-Holocene Climate” under contract 49975018.

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

Low-fi＇equency vertical vibration isolation systems play important roles in precision measurements to reduce seismic and environmental vibration noise. Several types of active vibration isolation systems have been developed. However, few researches focus on how to optimize the test mass install position in order to improve the vibration transmissibility. An active low-frequency vertical vibration isolation system based on an earlier instrument, the Super Spring, is designed and implemented. The system, which is simple and compact, consists of two stages： a parallelogram-shaped linkage to ensure vertical motion, and a simple spring-mass system. The theoretical analysis of the vibration isolation system is presented, including terms erroneously ignored before. By carefully choosing the mechanical parameters according to the above analysis and using feedback control, the resonance frequency of the system is reduced from 2.3 to 0.03 Hz, a reduction by a factor of more than 75. The vibration isolation system is installed as an inertial reference in an absolute gravimeter, where it improved the scatter of the absolute gravity values by a factor of 5. The experimental results verifies the improved performance of the isolation system, making it particularly suitable for precision experiments. The improved vertical vibration isolation system can be used as a prototype for designing high-performance active vertical isolation systems. An improved theoretical model of this active vibration isolation system with beam-pivot configuration is proposed, providing fundamental guidelines for vibration isolator design and assembling.

Numerical Calculation of Seafloor Synthetic Seismograms Caused by Low Frequency Point Sound Source

Elastic wave on seafloor caused by low frequency noise radiated from ship is called ship seismic wave which can be used to identify ship target. In order to analyze the wave components and the propagating properties of ship seismic wave, the numerical calculation of synthetic seismograms on seafloor aroused by a low frequency point sound source is carried out using a wave number integration technique combined with inverse Fourier transform. According to the numerical example of hard seafloor, the time series of seismic wave on seafloor are mostly composed of interface waves and normal mode waves. Each normal mode wave has a well defined low cut-off frequency, while the interface wave doesn't have. The frequency dispersion of normal mode wave is obvious when frequency is lower than 100Hz, while the interface wave is dispersive only in the infra-sound frequency range. The time series of seismic wave is dominated by the interface wave when the source frequency is less than the minimal cut-off frequency of normal mode wave.

EFFECT OF LOW-FREQUENCY ELECTROMAGNETIC FIELD ON THE AS-CASTING MICROSTRUCTURES AND MECHANICAL PROPERTIES OF HDC 2024 ALUMINUM ALLOY

The influences of the low frequency electromagnetic field on the horizontal direct chill casting process were investigated experimentally. Ingots of 2024 aluminum alloy with a cross size of 40 mm× 200 mm were produced by the conventional horizontal chill casting process and low frequency electromagnetic horizontal chill casting processre- spectively. The as-cast structures and the mechanical property of the ingots were examined. The results showed that the low frequency electromagnetic field could sub- stantially refine the microstructures and pronouncedly reduce the macrosegregation in the horizontal direct chill casting process. Moreover, the surface quality of the ingot was prominently improved by the low frequency electromagnetic field. The fracture strength and elongation percentage of the ingot was increased with the low frequency electromagnetic field.

Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency range

We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals （PFM） in the low frequency range. PFM is simplified as an equivalent idealized sheet with all metallic fibers aligned in one direction and distributed in periodic hexagonal patterns. We use a phenomenological model in the literature to investigate the effects of pore geometrical parameters （fiber diameter and gap） on sound absorption performance. The sound absorption coefficient of multi- layered PFMs is calculated using impedance translation theorem, To demonstrate the validity of the present model, we compare the predicted results with the experimental data. With the average sound absorption （low frequency range） as the objective function and the fiber gaps as the design variables, an optimization method for multi-layered fibrous metals is proposed. A new fibrous layout with given porosity of multi-layered fibrous metals is suggested to achieve optimal low frequency sound absorption. The sound absorption coefficient of the optimal multi-layered fibrous metal is higher than the single- layered fibrous metal, and a significant effect of the fibrous material on sound absorption is found due to the surface Dorosity of the multi-layered fibrous.

Dust Storms in North China in 2002: A Case Study of the Low Frequency Oscillation

The low frequency oscillation in both hemispheres and its possible role in the dust weather storm events over North China in 2002 are analyzed as a case study. Results show that the Aleutian Low is linked with the Circumpolar Vortex in the Southern Hemisphere on a 30-60-day oscillation, with a weak Circumpolar Vortex tending to deepen the Aleutian Low which may be helpful for the generation of dust storm events. The possible mechanism behind this is the inter-hemispheric interaction of the mean meridional circulation, with the major variability over East Asia. The zonal mean westerly wind at high latitudes of the Southern Hemisphere in the upper level troposphere may lead that of the Northern Hemisphere, which then impacts the local circulation in the Northern Hemisphere. Thus, the low frequency oscillation teleconnection is one possible linkage in the coupling between the Southern Hemisphere circulation and dust events over North China. However, the interannual variation of the low frequency oscillation is unclear.

Low-frequency characteristics extension for vibration sensors

Traditional magneto-electric vibration sensors and servo accelerometers have severe shortcomings when used to measure vibration where low frequency components predominate.A low frequency characteristic extension for velocity vibration sensors is presented in this paper.The passive circuit technology,active compensation technology and the closed- cycle pole compensation technology are used to extend the measurable range and to improve low frequency characteristics of sensors.Thses three types of low frequency velocity vibration sensors have been developed and widely adopted in China.

Efects of low frequency electromagnetic ield on surface quality, microstructure and hot-tearing tendency of semi-continuous casting ZK60 magnesium alloy billets

The low frequency electromagnetic field was applied during direct chill(DC) semi-continuous casting of the ZK60 magnesium alloy billets. Effects of low frequency electromagnetic field on surface quality, microstructure and hot-tearing tendency of Φ500 mm ZK60 magnesium alloy billets were investigated. The results showed that with the application of the low frequency electromagnetic field, the surface quality of the ZK60 magnesium alloy billets is markedly improved and the depth of cold fold is decreased. The microstructure of the billets is also significantly refined. Besides, the distribution of the grain size is relatively uniform from the billet surface towards its center, where the average grain size is 42 μm at surface and 50 μm at center. It also shows that the hot-tearing tendency of DC semi-continuous casting ZK60 magnesium alloy billets is significantly reduced under low frequency electromagnetic field.

Effect of Rare Earth Elements on Low Frequency Fatigue Cyclic Softening of Hot Rolled Steel 60CrMnMo at High Temperature

The effect of rare earth (RE) on cyclic softening of low frequency fatigue of the hot rolled steel 60CrMnMo at high temperature was investigated. The hardness of specimens before thermal fatigue test and being cycled 180 times from room temperature to 650℃ was compared. The results show that by adding a certain amount of RE in steel 60CrMnMo, the cyclic softening during low frequency fatigue test at high temperature can be restrained considerly. The carbide particles were refined during tempering treatment and the agglomeration and growth of carbide particles can be obstructed during thermal cycle.

Effects of Exposure to Extremely Low Frequency Electro-magnetic Fields on Circadian Rhythms and Distribution of Some Leukocyte Differentiation Antigens in Dairy Cows

Objective To investigate the effects of extremely low frequency magnetic and electric fields （ELFEMFs） emitted from 380 kV transmission lines on some leukocyte differentiation antigens in dairy cows. Methods The study was carded out in 5 cows exposed to 1.98-3.28 μT of ELFEMFs and in 5 control cows exposed to 0.2-0.7 μT of ELFEMFs. Following haematological and immunologic parameters were measured in both groups： WBC, CD45R, CD6, CD4, CD8, CD21, and CD11B leukocyte antigen expression. Results Some of the haematological and immunologic parameters under investigation were similar in both groups. However, CD8 （T lymphocyte surface antigen） was higher in the exposed group （1.35 ±0.120 vs 0.50 ±0.14×10^3/mL）. Furthermore, the CD4/CD8 ratio （0.84 ±0.05 and 2.19±0.16 for exposed and not exposed cows respectively） and circadian rhythm were different between the two groups. Conclusion Exposure to ELFEMFs is responsible of the abnormal temporal variations and distribution of some haematological and immunological parameters in dairy cows.

DESIGN AND ANALYSIS OF NOVEL ACTIVE ACTUATOR TO CONTROL LOW FREQUENCY VIBRATIONS OF SHAFT SYSTEM

Aiming at providing with high-load capability in active vibration control of large-scale rotor system, a new type of active actuator to simultaneously reduce the dangers of low frequency flexural and torsional vibrations is designed. The actuator employs electro-hydraulic system and can provide a high and circumferential load. To initialize new research, the characteristics of various kinds of active actuators to control rotor shaft vibration are briefly introduced. The purpose of this paper is to introduce the preliminary results via presenting the structure, functions and operating principles, in particular, the working process of the electro-hydraulic system of the new actuator which includes a set of high speed electromagnetic valves and a series of sloping cone-shaped openings, and presenting the transmission relationships among the control parameters from control signals into the valves to active load onto shaft. The course of the work is dynamic, and a series of spatial forces and moments are put on the shaft to get an external resultant force to reduce excitations that induce vibration of shafts. By checking states of vibration, the actuator can control the impulse width and the interval of injection time for applying different control force to a vibration shaft in two circumference directions through the regulating action of a set of combination directional control valves. The results from simulating analysis and experiment show evidence of that this design can satisfy the case of active process of decreasing of flexural and torsional vibrations.

An agile very low frequency radio spectrum explorer

The very low frequency(VLF)regime below 30 MHz in the electromagnetic spectrum has presently been drawing global attention in radio astronomical research due to its potentially significant science outcomes exploring many unknown extragalactic sources,transients,and so on.However,the nontransparency of the Earth’s ionosphere,ionospheric distortion and artificial radio frequency interference(RFI)have made it difficult to detect the VLF celestial radio emission with ground-based instruments.A straightforward solution to overcome these problems is a space-based VLF radio telescope,just like the VLF radio instruments onboard the Chang’E-4 spacecraft.But building such a space telescope would be inevitably costly and technically challenging.The alternative approach would be then a ground-based VLF radio telescope.Particularly,in the period of post 2020 when the solar and terrestrial ionospheric activities are expected to be in a’calm’state,it will provide us a good chance to perform VLF ground-based radio observations.Anticipating such an opportunity,we built an agile VLF radio spectrum explorer co-located with the currently operational Mingantu Spectra Radio Heliograph(MUSER).The instrument includes four antennas operating in the VLF frequency range 1-70 MHz.Along with them,we employ an eight-channel analog and digital receivers to amplify,digitize and process the radio signals received by the antennas.We present in the paper this VLF radio spectrum explorer and the instrument will be useful for celestial studies of VLF radio emissions.

The Structure of Low Frequency Phenomena in the Tropics and Its Interaction with the Extratropics

The structure of planetary scale low freonency phenomena in the tropics is studied, and an attempt is made to determine its influence and interactions with phenomena at higher latitudes.In the tropics, it is found that the majority of the variance in the zonal wind structure is made up in wave numbers I and 2. During warm events in the Pacific Ocean, when the Southern Oscillation Index is negative, almost all of the variance resides in the gravest mode which undergoes a 40° eastward phase shift. Meanwhile, the second logitudinal mode almost disappears. On the other hand, the meridional wind field possesses maximum amplitude at higher wave numbers. However, near the equator,the amplitude is small with extreme values occurring in the subtropics. The difference in scale and the location of cxtrcma of the meridional and zonal wind components indicate that the tropical atmosphere is responding to two different driving mechanisms.Correlation analyses between variations of the zonal wind at reference points along the equator with variations of component elsewhere show that there are strong logitudinal connections. The strongest correlations between the tropics and higher latitudes exist in the region of the equatorial westerlies. In fact, stronger correlations occur between variations in U anywhere along the equator and the middle latitudes to the north and south of the equatorial westerlies than to the latitudes immediately to the north and south of the reference points. We interpret this 'remote' correlation pattern as indicating a two-stage teleconnection process which emphasizes the importance of the equatorial tropical westerlies of the Pacific Ocean as a 'corridor' of communication between the low and high latitudes. The regionality of the correlations confirms, to some extent, recent theoretical development regarding trapped equatorial modes. Finally, time lagged correlations from plus and minus six months between variations of U and OLR indicate that the interactions between the extratropics and low latitudes possess an organized sequence. The extratropical influence appears to propagate into the tropics followed by an eastward propagation along the equator. Finally, a propagation from the tropics to the extratropics in the upper troposphere occurs in the eastern Pacific Ocean. The time-lagged correlation sequence does not appear to be symmetric about the equator.

Low frequency acoustic properties of bilayer membrane acoustic metamaterial with magnetic oscillator

A bilayer membrane acoustic metamaterial was proposed to overcome the influence of the mass law on traditional acoustic materials and obtain a lightweight thin-layer structure that can effectively isolate low frequency noise. The finite element analysis（FEA） results agree well with the experimental results.It is proved that the sound transmission losses（STLs） of the proposed structures are higher than those of same surface density acoustic materials. The introduction of the magnetic mass block is different from the traditional design method, in which only a passive mass block is fixed on the membrane. The magnetic force will cause tension in the membrane, increase membrane prestress, and improve overall structural stiffness. The effects of the geometry size on the STLs are discussed in detail. The kind of method presented in this paper can provide a new means for engineering noise control.

Pressure and velocity cross-spectrum of normal modes in low-frequency acoustic vector field of shallow water and its application

The pressure and horizontal particle velocity combined descriptions in the very low frequency acoustic field of shallow wa- ter integrated with the concept of effective depth of Pekeris wave- guide is proposed, especially the active component of the pressure and horizontal particle velocity cross-spectrum, also called ho- rizontal complex cross acoustic intensity, when only two normal modes are trapped in the waveguide. Both the approximate theo- retic analysis and the numerical results show that the sign of the horizontal complex cross acoustic intensity active component is independent of the range when vertically deployed receiving dual sensors are placed in appropriate depths, the sum of which is equal to the waveguide effective depth, so it can be used to tell whether the sound source is near the surface or underwater; while the range rate is expected to be measured by utilizing the sign distribution characteristic of the reactive component. The further robustness analysis of the depth classification algorithm shows that the existence of shear waves in semi infinite basement and the change of acoustic velocity profiles have few effects on the application of this method, and the seabed attenuation will limit the detection range, but the algorithm still has a good robustness in the valid detection range.