Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion c...Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion coefficient may cause lower thermal stress and higher accuracy. A new Zr-based alloy is developed and presented.The XRD diffraction results demonstrate that only a close-packed hexagonal phase（α or α＇ phase） exists in the microstructure. The thermal expansion and mechanical properties are studied. According to the experimental results, the new Zr-based alloy presents a low thermal expansion coefficient and good mechanical properties.Also,its thermal expansion coefficient is stable through solution treatment.展开更多
Cordierite honeycomb ceramics was treated with 1.5 M HNO3 , followed with 1.5 M NaOH at 93 ℃. The combination of acid treatment with alkali treatment significantly diminished the rebounding of coefficient of thermal ...Cordierite honeycomb ceramics was treated with 1.5 M HNO3 , followed with 1.5 M NaOH at 93 ℃. The combination of acid treatment with alkali treatment significantly diminished the rebounding of coefficient of thermal expansion （CTE） caused by heat treatment, a phenomenon observed in samples treated solely with acid. Inductively coupled plasma （ICP） analysis results reveal that the alkali treatment preferentially dissolved ＂free＂ SiO2 left in the acid-treated samples, which is considered to be a key factor responsible for the CTE rebounding.展开更多
Beryllium aluminum cyclosilicate, an ore of beryllium was reinforced in Aluminum matrix to fabricate Al-beryl composites using powder metallurgy. Effect of the content of beryllium aluminum cyclosilicate on microstruc...Beryllium aluminum cyclosilicate, an ore of beryllium was reinforced in Aluminum matrix to fabricate Al-beryl composites using powder metallurgy. Effect of the content of beryllium aluminum cyclosilicate on microstructural hardness and thermal expansion was studied. The coefficient of thermal expansion of Al-beryl composite was measured in the temperature range between 50oC to 360oC using dilatometer and was theoretically studied using thermo-elastic models, and these models were used to explain abnormalities observed experimentally. The hardness of Al-beryl metal matrix composites increased with the increase in beryl percentage. Vacuum sintering of Al-beryl metal matrix composites at 600oC inhibited excellent bonding between the matrix and the particulate increasing the strength of the composite. The result shows the CTE significantly increased with increasing temperature but decreased with increasing reinforcement. At higher temperatures, CTE of Al-beryl metal matrix composites with 5 wt%, 10 wt% and 15 wt% of beryllium aluminum cyclosilicate was 21 ppm/K, 18.2 ppm/K, and 16.8 ppm/K. The CTE values were found to be comparable with theoretical results. The turner model showed conformance with experimental results, was well suited to the experimental results.展开更多
High-entropy pyrosilicate element selection is relatively blind, and the thermal expansion coefficient (CTE) of traditional β-type pyrosilicate is not adjustable, making it difficult to meet the requirements of vario...High-entropy pyrosilicate element selection is relatively blind, and the thermal expansion coefficient (CTE) of traditional β-type pyrosilicate is not adjustable, making it difficult to meet the requirements of various types of ceramic matrix composites (CMCs). The following study aimed to develop a universal rule for high-entropy pyrosilicate element selection and to achieve directional control of the thermal expansion coefficient of high-entropy pyrosilicate. The current study investigates a high-entropy design method for obtaining pyrosilicates with stable β-phase and γ-phase by introducing various rare-earth (RE) cations. The solid-phase method was used to create 12 different types of high-entropy pyrosilicates with 4–6 components. The high-entropy pyrosilicates gradually transformed from β-phase to γ-phase with an increase in the average radius of RE^(3+) ions ( r¯(RE^(3+))). The nine pyrosilicates with a small r¯(RE^(3+)) preserve β-phase or γ-phase stability at room temperature to the maximum of 1400 ℃. The intrinsic relationship between the thermal expansion coefficient, phase structure, and RE–O bond length has also been found. This study provides the theoretical background for designing high-entropy pyrosilicates from the perspective of r¯(RE^(3+)). The theoretical guidance makes it easier to synthesize high-entropy pyrosilicates with stable β-phase or γ-phase for the use in environmental barrier coatings (EBCs). The thermal expansion coefficient of γ-type high-entropy pyrosilicate can be altered through component design to match various types of CMCs.展开更多
Effective manipulations of thermal expansion and conductivity are significant for improving operational performances of protective coatings,thermoelectric,and radiators.This work uncovers determinant mechanisms of the...Effective manipulations of thermal expansion and conductivity are significant for improving operational performances of protective coatings,thermoelectric,and radiators.This work uncovers determinant mechanisms of the thermal expansion and conductivity of symbiotic ScTaO_(4)/SmTaO_(4) composites as thermal/environmental barrier coatings(T/EBCs),and we consider the effects of interface stress and thermal resistance.The weak bonding and interface stress among composite grains manipulate coefficient of thermal expansion(CTE)stretching from 6.4×10^(−6) to 10.7×10^(−6) K^(−1) at 1300℃,which gets close to that of substrates in T/EBC systems.The multiscale effects,including phonon scattering at the interface,mitigation of the phonon speed(vp),and lattice point defects,synergistically depress phonon thermal transports,and we estimate the proportions of different parts.The interface thermal resistance(R)reduces the thermal conductivity(k)by depressing phonon speed and scattering phonons because of different acoustic properties and weak bonding between symbiotic ScTaO_(4) and SmTaO_(4) ceramics in the composites.This study proves that CTE of tantalates can be artificially regulated to match those of different substrates to expand their applications,and the uncovered multiscale effects can be used to manipulate thermal transports of various materials.展开更多
基金Supported by the Postdoctoral Science Foundation of Hebei Province under Grant No B2017003008the National Natural Science Foundation of China under Grant Nos 51531005,51671166,51571174 and 51604241the Natural Science Foundation of Hebei Province under Grant No E2016203395
文摘Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion coefficient may cause lower thermal stress and higher accuracy. A new Zr-based alloy is developed and presented.The XRD diffraction results demonstrate that only a close-packed hexagonal phase（α or α＇ phase） exists in the microstructure. The thermal expansion and mechanical properties are studied. According to the experimental results, the new Zr-based alloy presents a low thermal expansion coefficient and good mechanical properties.Also,its thermal expansion coefficient is stable through solution treatment.
基金Funded bythe International Cooperation Project of Jiangsu Prov-ince(No.BZ2001043)
文摘Cordierite honeycomb ceramics was treated with 1.5 M HNO3 , followed with 1.5 M NaOH at 93 ℃. The combination of acid treatment with alkali treatment significantly diminished the rebounding of coefficient of thermal expansion （CTE） caused by heat treatment, a phenomenon observed in samples treated solely with acid. Inductively coupled plasma （ICP） analysis results reveal that the alkali treatment preferentially dissolved ＂free＂ SiO2 left in the acid-treated samples, which is considered to be a key factor responsible for the CTE rebounding.
文摘Beryllium aluminum cyclosilicate, an ore of beryllium was reinforced in Aluminum matrix to fabricate Al-beryl composites using powder metallurgy. Effect of the content of beryllium aluminum cyclosilicate on microstructural hardness and thermal expansion was studied. The coefficient of thermal expansion of Al-beryl composite was measured in the temperature range between 50oC to 360oC using dilatometer and was theoretically studied using thermo-elastic models, and these models were used to explain abnormalities observed experimentally. The hardness of Al-beryl metal matrix composites increased with the increase in beryl percentage. Vacuum sintering of Al-beryl metal matrix composites at 600oC inhibited excellent bonding between the matrix and the particulate increasing the strength of the composite. The result shows the CTE significantly increased with increasing temperature but decreased with increasing reinforcement. At higher temperatures, CTE of Al-beryl metal matrix composites with 5 wt%, 10 wt% and 15 wt% of beryllium aluminum cyclosilicate was 21 ppm/K, 18.2 ppm/K, and 16.8 ppm/K. The CTE values were found to be comparable with theoretical results. The turner model showed conformance with experimental results, was well suited to the experimental results.
基金supported by the Instrument and Equipment Development,Chinese Academy of Sciences(YJKYYQ20210030)Shanghai Science and Technology Innovation Action Plan(21142201100).
文摘High-entropy pyrosilicate element selection is relatively blind, and the thermal expansion coefficient (CTE) of traditional β-type pyrosilicate is not adjustable, making it difficult to meet the requirements of various types of ceramic matrix composites (CMCs). The following study aimed to develop a universal rule for high-entropy pyrosilicate element selection and to achieve directional control of the thermal expansion coefficient of high-entropy pyrosilicate. The current study investigates a high-entropy design method for obtaining pyrosilicates with stable β-phase and γ-phase by introducing various rare-earth (RE) cations. The solid-phase method was used to create 12 different types of high-entropy pyrosilicates with 4–6 components. The high-entropy pyrosilicates gradually transformed from β-phase to γ-phase with an increase in the average radius of RE^(3+) ions ( r¯(RE^(3+))). The nine pyrosilicates with a small r¯(RE^(3+)) preserve β-phase or γ-phase stability at room temperature to the maximum of 1400 ℃. The intrinsic relationship between the thermal expansion coefficient, phase structure, and RE–O bond length has also been found. This study provides the theoretical background for designing high-entropy pyrosilicates from the perspective of r¯(RE^(3+)). The theoretical guidance makes it easier to synthesize high-entropy pyrosilicates with stable β-phase or γ-phase for the use in environmental barrier coatings (EBCs). The thermal expansion coefficient of γ-type high-entropy pyrosilicate can be altered through component design to match various types of CMCs.
基金Thanks for the supports from the National Natural Science Foundation of China(No.91960103)National Key Research and Development Program of China(No.2022YFB3708600)+1 种基金the Rare and Precious Metals Material Genetic Engineering Project of Yunnan Province(No.202102AB080019-1)the Top Innovative Talents of Graduate Students of Kunming University of Science and Technology。
文摘Effective manipulations of thermal expansion and conductivity are significant for improving operational performances of protective coatings,thermoelectric,and radiators.This work uncovers determinant mechanisms of the thermal expansion and conductivity of symbiotic ScTaO_(4)/SmTaO_(4) composites as thermal/environmental barrier coatings(T/EBCs),and we consider the effects of interface stress and thermal resistance.The weak bonding and interface stress among composite grains manipulate coefficient of thermal expansion(CTE)stretching from 6.4×10^(−6) to 10.7×10^(−6) K^(−1) at 1300℃,which gets close to that of substrates in T/EBC systems.The multiscale effects,including phonon scattering at the interface,mitigation of the phonon speed(vp),and lattice point defects,synergistically depress phonon thermal transports,and we estimate the proportions of different parts.The interface thermal resistance(R)reduces the thermal conductivity(k)by depressing phonon speed and scattering phonons because of different acoustic properties and weak bonding between symbiotic ScTaO_(4) and SmTaO_(4) ceramics in the composites.This study proves that CTE of tantalates can be artificially regulated to match those of different substrates to expand their applications,and the uncovered multiscale effects can be used to manipulate thermal transports of various materials.
