Controlled low central venous pressure reduces blood loss and transfusion requirements in hepatectomy

AIM: To evaluate the effect of low central venous pressure (LCVP) on blood loss and blood transfusion in patients undergoing hepatectomy.

Piezoelectric properties of low loss and high Curie temperature (Bi, La)FeO_3-Pb(Ti, Mn)O_3 ceramics with Mn doping

Piezoelectric ceramics of 0.6(Bi0.9La0.1)FeO3-0.4Pb(Ti1-xMnx)O3 (BLF-PTM) for x=0, 0.01, 0.02, and 0.03 were prepared by sol-gel process combined with a solid-state reaction method. The tan? for BLF-PTM of x=0.01 is just 0.006 at 1 kHz, drastically decreasing by using Mn dopants. The TC increases to 490 ℃ for BLF-PTM of x=0.02. Furthermore, Mn modification effectively enhances the poling state and the piezoelectric properties of BLF-PTM. The kp, Qm, d33, and g33 of 0.34, 403, and 124 pC1·N-1 and 37×10-3 Vm·N-1 are achieved for BLF-PTM of x=0.01. The results indicate that Mn modified BLF-PTM is a competitive high power and high temperature piezoelectric material with excellent piezoelectric properties.

Cross influence of discharge and circulation on head loss of conduit of pump system with low head

The relationship between the head loss and the discharge and circulation of the conduit of a pump system with low head is an important problem with an obvious influence on the improvement of its hydraulic performance. The velocity circulation from the pump guide vane makes the relationship more complicated, which has to be understood comprehensively. The results indicate that, under the condition of zero circulation, the head loss of the inlet and outlet conduits is in proportion to the square of discharge. Under the condition that the Reynolds number is satisfied with the resistant square area, the conduit loss is in proportion to the square of discharge for the similar working points with different speeds in a certain rotational speed range, indicating that the pump system efficiency is constant. The outlet conduit loss of design discharge for a pump system with low head depends on the velocity circulation from the guide vane exit, and the relationship between the loss and the circulation is an open curve with an upward direction, meaning that there is an optimal circulation for the loss. Under the condition of various working points for a pump system with low head, the head loss of the outlet conduit is under the cross influence of both the discharge and the circulation. As a result, the relationship between the head loss and the discharge is almost linear, and the mechanism needs to be further studied.

Tunable low frequency band gaps and sound transmission loss of a lever-type metamaterial plate

A novel metamaterial plate with subwavelength lever-type resonators is proposed to obtain low frequency broadband band gaps and good sound insulation performance.The band structure is theoretically derived,and the validity of the theoretical method is verified by the finite element method.The formation mechanisms of the band gaps are illustrated by the analysis of the effective dynamic mass density and group velocity.The effect of the lever ratio on the band gaps is analyzed.The results indicate that as the lever ratio increases,the first band gap shifts to lower frequencies,while the bandwidth is widened.Moreover,the sound insulation performance of the proposed metamaterial plate is evaluated via examining the sound transmission loss(STL).Compared with the metamaterial plates without lever accessories,the proposed metamaterial plates with a suitable lever ratio have better sound insulation performance at low frequencies.

Development of a low-loss magnetic-coupling pickup for 166.6-MHz quarter-wave beta=1 superconducting cavities

166.6-MHz quarter-waveβ=1 superconducting cavities have been adopted for the High Energy Photon Source,a 6-GeV diffraction-limited synchrotron light source currently under construction.A large helium jacket was required to accommodate the enlarged cavity beam pipe for the heavy damping of higher-order modes;the original electric-probe pickup thus becomes inevitably long with unfavorable mechanical properties.Relocated to an existing high-pressure-rinsing port,a magnetic-loop pickup was designed,characterized by low radio-frequency and cryogenic losses and being multipacting-free and insensitive to manufacturing and assembly tolerances.The consequent removal of the original pickup port from the cavity largely simplified the helium jacket fabrication and may also reduce cavity contamination.This paper presents a comprehensive design of a low-loss magnetic-coupling pickup for quarter-waveβ=1 superconducting cavities.The design can also be applied to other non-elliptical structures.

含磷酚醛在无卤low loss覆铜板的运用研究

通过在环氧体系中添加不同含量含磷酚醛,研究了不同添加量对胶水及层压板性能的影响。结果表明:含磷酚醛的添加量对胶水凝胶化时间及板材的耐热性、耐湿热性、抗剥离强度、阻燃性有明显影响。当含磷酚醛含量为10%,板材综合性能最优,得到无卤阻燃UL-V0级,low loss的耐湿热性、耐热性好的覆铜板。

Low loss Z-type Hexaferrites with Bi2O3 Additives for Ultra-high Frequency Antenna Applications

The Z-type ferrites of nominal composition Ba3Co2 Fe24O41+x wt% Bi2O3, where x=0.25, 0.5, 1.0, 1.5, 2.0, were prepared by conventional ceramic processes. The influence of Bi2O3 content on the bulk densities, microstructures, magnetic and dielectric properties of Z-type ferrite samples were systematically examined so as to obtain materials with low magnetic and dielectric loss tangent over a frequency ranging from 600 to 800 MHz. The experimental results showed that addition of Bi2O3 lowered the sintering temperature(1 020 ℃) and then reduced the average grain size(<2 μm) and enhanced the resistivity(>2.68×10^8 Ω·cm) dramatically, which consequently decreased the magnetic and dielectric loss. Additionally, the low loss factors were observed at the Bi2O3 content x = 1.0, i e, tan δμ/μ’=0.013 and tan δε/ε’= 0.001 at 800 MHz, and such materials could be used for antennas miniaturization from 600 to 800 MHz.

A super junction SiGe low-loss fast switching power diode

This paper proposes a novel super junction （S J） SiGe switching power diode which has a columnar structure of alternating p- and n- doped pillar substituting conventional n- base region and has far thinner strained SiGe p＋ layer to overcome the drawbacks of existing Si switching power diode. The SJ SiGe diode can achieve low specific on-resistance, high breakdown voltages and fast switching speed. The results indicate that the forward voltage drop of SJ SiGe diode is much lower than that of conventional Si power diode when the operating current densities do not exceed 1000 A/cm^2, which is very good for getting lower operating loss. The forward voltage drop of the Si diode is 0.66V whereas that of the SJ SiGe diode is only 0.52V voltages are 203 V for the former and 235 V for the latter. at operating current density of 10A/cm^2. The breakdown Compared with the conventional Si power diode, the reverse recovery time of SJ SiGe diode with 20 per cent Ge content is shortened by above a half and the peak reverse current is reduced by over 15%. The SJ SiGe diode can remarkably improve the characteristics of power diode by combining the merits of both SJ structure and SiGe material.

Low-loss terahertz waveguide with InAs-graphene-SiC structure

We demonstrate a low-loss terahertz waveguide based on the InAs-graphene-SiC structure. By analyzing the terahertz waveguide proposed in this paper, we can obtain that it is the characteristic of a low transmission loss coefficient （αloss 0.55 dB/m） for fundamental mode （LP01） when the incident frequency is larger than 3.0 THz. The critical radii of the inside and outside cylinders have been found for the high-quality transmission. The large inside radius and the high transmission frequency result in a fiat transmission loss coefficient curve. As a strictly two-dimensional material, the double graphene surface rings perform better to improve the quality of transmission mode. These results provide a new idea for the research of the long-distance THz waveguide.

Bleustein-Gulyaev SAWS with Low Losses: Approximate Direct Solution

The main properties (attenuation along the surface, attenuation in depth, additional radiation in depth, dispersion in propagation space) of Bleustein-Gulyaev surface acoustic waves (SAWs) in electroelasticity are determined in terms of a perturbation due to viscosity. This paves the way for a study of the perturbed motion of associated quasi-particles in the presence of low losses.

Low-loss Cd-substituted Mg ferrites with matching impedance for high-frequency-range antennas

The effects of Cd^(2+) ions on the microstructure,magnetic properties,and dielectric properties of Bi_(2)O_(3)-added MgFe_(2)O_(4) ferrites(Cd_(x)Mg_(1-x)Fe_(2)O_(4),x=0.00,0.15,0.30 and 0.45)are obtained by adopting the solid-state reaction method at a low temperature(910℃).The objective is to achieve matching impedances,low magnetic and dielectric losses(tanδμand tanδε,respectively),and a relatively large miniaturization factor to reduce antenna size.Experimental results indicate that the cations occupying the tetrahedral(A)and octahedral(B)ion sites are redistributed,resulting in an enhanced super-exchange interaction between the two sublattices.As a result,improved magnetization,including the increase in saturation magnetization(41.74 emu/g)and decrease in coercivity(63.75 Oe),is realized.The real part of permeability(μ')also increases with increasing concentration of Cd^(2+) ions.When x is 0.15,matching impedances with equivalent μ'and ε'values are obtained over a long frequency range(1–150MHz).Moreover,the formation of a dense microstructure guarantees that losses occur at low orders of magnitude(tanδμ≈10−2 and tanδε≈10−3).Accordingly,these properties afford wide application perspectives for the proposed compounds in the high-frequency region,i.e.,from high-frequency to very-high-frequency bands.

Low-Loss Co₂-Y Ferrites with Added CuO Sintered in Air for High Frequency Application

The sintering characteristics of hexagonal Co2-Y-type ferrite, Ba2Co2Fe12O22, with the addition of 0.6 wt% CuO, were studied in order to allow for preparation in air, as opposed to the conventionally recommended O2, for industrial production. The dependence of the resistivity, ρ magnetic loss, tanδ, and the permeability, μ, at 1 GHz on the sintering temperature was investigated. A low tanδ of 0.05 with a m of 2.7 at a frequency of 1 GHz, along with a high ρ (up to 7 × 104 μm), were attained under sintering at 1170°C in air, which were the same features as those of samples sintered at 1200°C in O2. The dependence of tanδ on grain diameter was also examined, and it was determined that a small grain size (less than 2 μm) is preferable for low tanδ.

CNOOC Reports Heavy Loss amid Low Oil Prices

CNOOC Limited,of which China National Offshore Oil Corporation(CNOOC)is the parent,recently posted its first-ever half-year loss as the plunge of crude oil prices destroy the profit at China’s biggest offshore oil and gas producer.The company swung to a 7.74 billion yuan(USD1.16billion)loss in the January-June period,compared to a

Research on Nanometer Technique and Low-Work-Loss Sensor

The preparation process of the CO gas sensor used at normal temperature is presented.The electric conductance of this type of sensor evolved oscillation from regularly when the sensor is exposed to low level CO gas.The gas sensing mechanism was investigated by its crystalline structure.The mechanism of information sensing,which was the concurrence of the grain boundary barrier control and the crystal surface control,is discussed.

An analytical model to estimate the time delay to reach spontaneous ignition considering heat loss in oil reservoirs

During air injection into an oil reservoir,an oxidation reaction generates some heat to raise the reservoir temperature.When the reservoir temperature reaches an ignition temperature,spontaneous ignition occurs.There is a time delay from the injection to ignition.There are mixed results regarding the feasibility of spontaneous ignition in real-field projects and in laboratory experiments.No analytical model is available in the literature to estimate the oxidation time required to reach spontaneous ignition with heat loss.This paper discusses the feasibility of spontaneous ignition from theoretical points and experimental and field project observations.An analytical model considering heat loss is proposed.Analytical models with and without heat loss investigate the factors that affect spontaneous ignition.Based on the discussion and investigations,we find that it is more difficult for spontaneous ignition to occur in laboratory experiments than in oil reservoirs;spontaneous ignition is strongly affected by the initial reservoir temperature,oil activity,and heat loss;spontaneous ignition is only possible when the initial reservoir temperature is high,the oil oxidation rate is high,and the heat loss is low.

Low-Loss, Broadband and Tunable Negative Refractive Index Metamaterial

This paper report on a low-loss, broadband, and tunable negative refractive index metamaterial (NRIM) consisting of yttrium iron garnet (YIG) slabs and printed circuit boards (PCBs). The YIG slabs under an applied magnetic field provide a negative permeability and the PCBs provide a negative permittivity. The substrates of the PCBs decuple the interactions between the YIG slabs and wire array deposed on such substrates. The effective electromagnetic parameters of the NRIM and the conditions of exhibiting the negative refractive index character are analyzed theoretically. Then the negative transmission and negative refraction characters are investigated numerically and experimentally. The results indicate that the NRIM exhibits negative pass band within the X-band with a bandwidth of about 1 GHz and a peak transmission power of about - 2.5 dB. While changing the applied magnetic field from 2300 Oe to 2700 Oe, the measured pass band of NRIM shift from 8.42 GHz to 9.50 GHz with a 2.7 MHz/Oe step. The results open a sample way to fabricate the NRIM, further, the metamaterial cloak and absorber.

Aerodynamic Design and Analysis of a Low-reaction Axial Compressor Stage

There is introduced a new low-reaction, highly-loaded axial compressor design concept which is coupled with boundary layer suction method. The characteristic features of the concept are made clear through its comparison with the MIT boundary layer suction compressor. Also are pointed out the potential applications of this concept as well as its key technological problems. Based on this concept, a single-stage, low-reaction and low-speed axial compressor is constructed in association with analysis and computation of boundary layer suction on vanes with the aid of a three-dimensional numerical approach. The results attest to the effectiveness of this way to control separation in blade cascades by the boundary layer suction and the feasibility of this proposed design concept.

Preparation and Properties of Anti-oxidation Inorganic Nano-coating for Low Carbon Steel at an Elevated Temperature

A new kind of anti-oxidation inorganic nano-coating for the common low carbon steel was prepared. It included magnesite mineral, metallurgic dust and silicate adhesive as the main raw materials. The nano-coating could be sprayed directly onto the low carbon steel slab even though with hot surface as far as under 1000 ℃ . And at the same time, a compact thin nano-film was formed, and the film would inhibit the oxygen into the interface of the steel body and decrease the loss of weight because of oxidation. The loss was decreased by about 60% or more. The properties and mechanism of oxidation resistance of the coating were discussed through XRD, TG-DTA and SEM. The experimental results show that many reactions would happen among the companents of the coating and then many microspheres with the size of 80- 100nm generated in the system. By using the heat of the steel body, the silicate adhesive would interact with the microspheres, and the other components of the coating would be soft and sintered so that when the coating was sprayed onto the suface of the steel slab , the intact and compact film could be formed and adhesive with the steel body. Besides the special properties of anti- oxidation, the coating could prevent the volatilization of microelement in the steel such as silicate and carbon at a high temperature. So it can improve the quality and output of steel with this new kind of nano-coating.

Effect of controlled low central venous pressure on renal function in major liver resection

Objective： To investigate the effects of low central venous pressure （LVCP） on blood loss and evaluate its influence on renal function in patients undergoing hepatectomy. Methods： Forty-six patients, ASA classification Ⅰ-Ⅲ, undergoing liver resection were randomized into LCVP group （n = 23） and control group （n = 23）. In LCVP group, CVP was maintained at 2-4 mmHg and MBP above 60 mmHg during hepatectomy, while in control group hepatectomy was performed routinely without lowering CVP. Volume of blood loss during hepatectomy, volume of blood transfusion, and changes of renal functions were compared between the two groups. Results： There were no significant differences in demographics, ASA score, type of hepatectomy, duration of inflow occlusion, operation time, weight of resected liver tissues, and renal functions between the two groups. LCVP group had a significantly lower volume of total intraoperative blood loss （P 〈 0.01） and RBC transfusion （P 〈 0.05）. Conclusion： Lowering the CVP to less than 5 mmHg is a simple and effective technique to reduce blood loss and blood infusion during liver resection, and has no detrimental effects on renal functions.

Dyeing Behavior of Yak Hair Fiber Treated with Microwave Low Temperature Plasma

The scales on the surface of yak hair fiber act as barriers during the dyeing process. In order to solve the scale problem and to improve the dyeability of yak hair, yak hair fiber was treated by microwave low temperature plasma (MLTP) in this study. The weight loss and the dyeing properties of the yak hair fiber modified by MLTP were investigated. Scanning Electron Microscopy (SEM) photographs were taken to observe the changes in the surface shape of yak hair fiber before and after treatment. Results showed that after MLTP treatment, the scale structure of yak hair was weakened and damaged greatly and the noticeable changes on the surface shape took place. At the same time, a significant improvement in dyeing properties of yak hair fiber was exhibited.