Introduction to Mesh Based Generated Lumped Parameter Models for Electromagnetic Problems using Triangular Elements

This paper is an introduction to mesh based generated reluctance network modeling using triangular elements.Many contributions on mesh based generated reluctance networks using rectangular shaped elements have been published,but very few on those generated from a mesh using triangular elements.The use of triangular elements is aimed at extending the application of the approach to any shape of modeled devices.Basic concepts of the approach are presented in the case of electromagnetic devices.The procedure for coding the approach in the case of a flat linear permanent magnet machine is presented.Codes developed under MATLAB environment are also included.

A Numerical Simulation of Air Flow in the Human Respiratory System Based on Lung Model

The lung is an important organ that takes part in the gas exchange process. In the study of gas transport and exchange in the human respiratory system, the complicated process of advection and diffusion (AD) in airways of human lungs is considered. The basis of a lumped parameter model or a transport equation is modeled during the inspiration process, when oxygen enters into the human lung channel. The quantitative measurements of oxygen are detached and the model equation is solved numerically by explicit finite difference schemes. Numerical simulations were made for natural breathing conditions or normal breathing conditions. The respiratory flow results for the resting conditions are found strongly dependent on the AD effect with some contribution of the unsteadiness effect. The contour of the flow rate region is labeled and AD effects are compared with the variation of small intervals of time for a constant velocity when breathing is interrupted for a negligible moment.

Recommending the IHACRES model for water resources assessment and resolving water conflicts in Africa

The International Association of Hydrological Sciences （IAHS） recognized the lack of hydro- logical data as a world-wide problem in 2002 and adopted the Prediction of Ungauged Basins （PUB） as a decadal research agenda during the period of 2003 to 2012. One of the objectives is to further develop methodologies for prediction in ungauged basins and to reduce uncertainties in model prediction. Estimation of stream flows is required for flood control, water quality control, valley habitat assessment and water budget of a country. However, the majority of water catchments, streams and valleys are ungauged in most developing countries. The main objective of this paper is to introduce the IHACRES （Identification of Hy- drographs and Components from Rainfall, Evaporation and Stream） model into African hydrological plan- ning as a methodology for water resources assessment, which in turn can be used to resolve water conflicts between communities and countries and to study the climate change issues. This is because the IHACRES model is applied for the estimation of flows in ungauged catchments whose physical catchments descriptors （PCDs） can be determined by driving variables （i.e. rainfall and temperature）; and also in gauged streams but whose gauging stations are no longer operational but historical data are available for model calibration. The model provides a valuable insight into the hydrologic behaviour of the upper water sources for valleys as well as provides a useful methodology for water resources assessment in situations of scarce financial resources in developing countries. In addition, it requires relatively few parameters in its calibration and has been successful applied in previous regionalization studies. It will also make possible the equitable distri- bution of water resources in international basins and rivers＇ catchments. This paper does not apply the model anywhere, but recommends it as a methodology for water resources assessment in order to cure water conflicts on the African continent.

Analysis of Do D inkjet printhead performance for printable electronics fabrication using dynamic lumped element modeling and swarm intelligence based optimal prediction

The major challenge in printable electronics fabrication is to effectively and accurately control a drop-on-demand(Do D) inkjet printhead for high printing quality. In this work, an optimal prediction model, constructed with the lumped element modeling(LEM) and the artificial bee colony(ABC) algorithm, was proposed to efficiently predict the combination of waveform parameters for obtaining the desired droplet properties. For acquiring higher simulation accuracy, a modified dynamic lumped element model(DLEM) was proposed with time-varying equivalent circuits, which can characterize the nonlinear behaviors of piezoelectric printhead. The proposed method was then applied to investigate the influences of various waveform parameters on droplet volume and velocity of nano-silver ink, and to predict the printing quality using nano-silver ink. Experimental results show that, compared with two-dimension manual search, the proposed optimal prediction model perform efficiently and accurately in searching the appropriate combination of waveform parameters for printable electronics fabrication.

A modified lumped parameter model of distribution transformer winding

The modelling of the distribution transformer winding is the starting point and serves as important basis for the transformer characteristics analysis and the lightning pulse response prediction.A distributed parameters model can depict the winding characteristics accurately,but it requires complex calculations.Lumped parameter model requires less calculations,but its applicable frequency range is not wide.This paper studies the amplitude-frequency characteristics of the lightning wave,compares the transformer modelling methods and finally proposes a modified lumped parameter model,based on the above comparison.The proposed model minimizes the errors provoked by the lumped parameter approximation,and the hyperbolic functions of the distributed parameter model.By this modification it becomes possible to accurately describe the winding characteristics and rapidly obtain the node voltage response.The proposed model can provide theoretical and experimental support to lightning protection of the distribution transformer.

MODELING AND EXPERIMENTAL STUDY OF A PASSIVE HYDRAULIC ENGINE MOUNT WITH INERTIA AND DIRECT-DECOUPLER

To investigate the dynamic characteristics and damping theory of the passive hydraulic engine mount （PHEM）, numerical prediction is performed through lumped parameter model. System parameters, including volume compliance of the decoupler chamber, effective piston area, fluid inertia and resistance of inertia track and direct-decoupler, are identified by means of experiments and finite element method （FEM）. Dynamic behaviors are tested with elastomer test system for purpose of validating PHEM. With incorporation of inertia track and direct-decoupler, PHEM behaves effective and efficient vibration isolation in range of both low and high frequencies. The comparison of the numerical results with the experimental observations shows that the present PHEM achieves fairly good performance for the engine vibration isolation.

Introduction to Mesh Based Generated Lumped Parameter Models for Electromagnetic Problems

This paper is an introduction to mesh based generated reluctance network modeling.An overview of scientific works which led to the development of this approach is first presented.Basic concepts of the approach are then presented in the case of electromagnetic devices.A step-by-step procedure for coding the approach in the case of a flat linear permanent magnet machine is presented.Codes developed under MATLAB and Scilab environments are also included.

An improved lumped parameter model predicting attenuation of earmuff with air leakage

Since air leakage is inevitable when earmuffs are worn improperly or together with safety glasses in factory or military,it is required to be considered to accurately predict earmuff attenuation.Besides unwanted air leakage,under controlled air leakage is introduced to earmuff to achieve adjustable attenuations in different signal-to-noise ratios(SNRs)and balance between attenuation and speech intelligibility.This work is to develop an improved lumped parameter model(LPM)to predict earmuff attenuation with consideration of air leakage.Air leakage paths are introduced into conventional LPM without air leakage,and air leakage path impedance is analytically described by Maa’s microperforated tube impedance.Earmuff passive attenuation behavior can be analytically described and analyzed with the improved LPM.Finally,the validity of improved LPM is verified experimentally.The results indicate that the improved LPM can predict earmuff attenuation with air leakage,and air leakage deteriorates earmuff attenuation and turns resonance frequency higher.

Study on Modeling for a New FCC Technique——MIP Riser Reactor

This research work developed a model for the MIP riser reactor using the data collected from an industrial MIP unit.Based on analysis of flow patterns in the reactor,three models were established and a comparison was made on each other.The results indicated that Model Ⅲ,which was assumed a plug flow in the first reaction zone and a gas plug flow and a continuously stirred catalyst flow in the second reaction zone,was the best.The results of this research could offer an information and guidance for optimization and development of MIP unit.

Lumped Parameter Mass Flow Rate and Pressure Control Characteristics Model for High-Speed Pneumatic PWM on/off Valve

Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the valves time periods was well developed. With this model,the mass flow rate and dynamic pressure characteristics of constant volumes controlled by high-speed pneumatic PWM on /off valves was well described. A variable flow rate coefficient model was proposed to substitute for the constant one used in most of the prior works to investigate PWM on /off valves' dynamical pressure response, and a formula for disclosing the inherent relationship among the PWM command signal,static mass flow rate,and sonic conductance of the valve was newly derived.Finally,an extensive set of analytical experimental comparisons were implemented to verify the validity of the proposed mathematica model. With the proposed model, PWM on /off valves' characteristics,such as mass flow rate,step pressure response of the valve control system,mean pressure and ripple amplitude,not only in the linear range,but also in the nonlinear range can be wel predicted; Good agreement between measured and calculated results was obtained,which proved that the model is helpful for designing a control strategy in a closed loop control system.

GEOTHERMAL RESOURCES ASSESSMENT AND NUMERICAL SIMULATION IN TUANBO REGION

This paper mainly deals with the reservoir on the heat and mass transfer and mass and energy balance in a geothermal field.On the basis of briefing the general characteristics of the reservoir and the supposition of the reservoir modeling,the paper emphasizes the mathematical descriptions of hydra thermal transportation and convection by two methods according to the different models,such as lumped parameter model and distributed parameter model.It is effective to use these models in simulating the heterogeneous,and anisotropical fracture reservoir for the designed lifetime of 15 years.

Multiobjective Optimization of the Industrial Naphtha Catalytic Re-forming Process

In this article, a multiobjective optimization strategy for an industrial naphtha continuous catalytic reform-ing process that aims to obtain aromatic products is proposed. The process model is based on a 20-lumped kinetics re-action network and has been proved to be quite effective in terms of industrial application. The primary objectives in-clude maximization of yield of the aromatics and minimization of the yield of heavy aromatics. Four reactor inlet tem-peratures, reaction pressure, and hydrogen-to-oil molar ratio are selected as the decision variables. A genetic algorithm, which is proposed by the authors and named as the neighborhood and archived genetic algorithm (NAGA), is applied to solve this multiobjective optimization problem. The relations between each decision variable and the two objectives are also proposed and used for choosing a suitable solution from the obtained Pareto set.

Acceleration-Dependent Analysis of Vertical Ball Screw Feed System without Counterweight

The distinguishing feature of a vertical ball screw feed system without counterweight is that the spindle system weight directly acts on the kinematic joints.Research into the dynamic characteristics under acceleration and deceleration is an important step in improving the structural performance of vertical milling machines.The magnitude and direction of the inertial force change significantly when the spindle system accelerates and decelerates.Therefore,the kinematic joint contact stiffness changes under the action of the inertial force and the spindle system weight.Thus,the system transmission stiffness also varies and affects the dynamics.In this study,a variable-coefficient lumped parameter dynamic model that considers the changes in the spindle system weight and the magnitude and direction of the inertial force is established for a ball screw feed system without counterweight.In addition,a calculation method for the system stiffness is provided.Experiments on a vertical ball screw feed system under acceleration and deceleration with different accelerations are also performed to verify the proposed dynamic model.Finally,the influence of the spindle system position,the rated dynamic load of the screw-nut joint,and the screw tension force on the natural frequency of the vertical ball screw feed system under acceleration and deceleration are studied.The results show that the vertical ball screw feed system has obviously different variable dynamics under acceleration and deceleration.The influence of the rated dynamic load and the spindle system position on the natural frequency under acceleration and deceleration is much greater than that of the screw tension force.

Comparison of SCS-CN Determination Methodologies in a Heterogeneous Catchment

The aim of this study was to assess the runoff amount from a catchment characterized by diverse land uses by using the Soil Conservation Service Curve Number(SCS-CN) method based on Curve Number(CN) defined for dominant homogeneous elementary sub-regions.The calculations employed the SCS-CN method,involving the division of the catchment in two homogeneous parts and determining the runoff amount.The obtained results were compared with the results provided by three other CN determination methods,i.e.the Hawkins function,the kinetics equation,and a complementary error function peak.The catchment is located in a mountain dominated by forest land cover.Empirical CN-Precipitation(CN_(emp)-P) data pairs were analyzed using the mentioned methods,and the highest quality score was achieved from model 1.The results suggest that dividing a catchment into two homogeneous areas and determining their separate CN parameters,used later on to calculate the runoff by means of the presented approach,could be an alternative to the standard methods.The described method is relatively easy,and as it does not require an adoption of numerous parameters,and it can be employed for designing hydraulic facilities.

Design and Performance Evaluation of Piezo-Driven Synthetic Jet Devices

In the last two decades synthetic jet actuators have gained much interest among flow control techniques due to their short response time, high jet velocity and absence of traditional piping, that matches the requirements of reduced size and low weight. A synthetic jet is generated by the diaphragm oscillation (generally driven by a piezo- electric element) in a relatively small cavity, producing periodic cavity pressure variations associated to cavity volume changes. The high pressure air exhausts through an orifice, converting membrane elastic energy in jet kinetic energy. This review paper faces the development of various lumped-element models (LEM) as practical tools to design and manufacturing actuators. LEM can predict quickly device performances such as frequency response in terms of membrane displacement, cavity pressure and jet velocity, as well as efficiency of energy conversion of input Joule power into useful kinetic power of air jet. Actuator performance is analyzed also by varying typical geometric parameters such as cavity height and orifice diameter and length, through a proper dimensionless form of the governing equations.

Improving the Performance of an Electro-Hydraulic Load-Sensing Proportional Control Valve

The paper deals with the simulation and the experimental verification of the hydraulic behavior of an electro-hydraulic load-sensing proportional control valve. An innovative CAE （computer aided engineering） methodology, developed combining CFD （computational fluid dynamics） simulations with lumped and distributed numerical modeling, is firstly introduced and tailored by comparing the numerical results with measurements coming from an experimental campaign performed for a wide range of pressure loads and metered flow rates. Then, both the reliability and the limits of the numerical approach are highlighted through a detailed numerical vs. experimental comparison, involving the pressure of the main hydraulic lines, the flow rate through the first section and the local compensator displacement. Finally, the CAE methodology has been applied for assessing the internal ducts hydraulic permeability and the local compensator spring pre-load influence on the control valve metering curves. At the end of this analysis, an optimized design configuration, featuring a maximum controlled volumetric flow rate increased of more than 25%, has been proposed.

Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System

Three degrees of freedom （3-DOF） Helmholtz resonator which consists of three cylindrical necks and cavities connected in series （neck-cavity-neck-cavity-neck-cavity） is suitable to reduce flow pulsation in hydraulic system. A novel lumped parameter model （LPM） of 3-DOF Helmholtz resonator in hydraulic system is developed which considers the viscous friction loss of hy- draulic fluid in the necks. Applying the Newton＇s second law of motion to the equivalent mechanical model of the resonator, closed-form expression of transmission loss and resonance frequency is presented. Based on the LPM, an optimal design method which employs rotate vector optimization method （RVOM） is proposed. The purpose of the optimal design is to search the reso- nator＇s unknown parameters so that its resonance frequencies can coincide with the pump-induced flow pulsation harmonics respectively. The optimal design method is realized to design 3-DOF Helmholtz resonator for a certain type of aviation piston pump hydraulic system. The optimization result shows the feasibility of this method, and the simulation under optimum parame- ters reveals that the LPM can get the same precision as transfer matrix method （TMM）.

Stability analysis of the extended ADI-FDTD technique including lumped models

The numerical stability of the extended alternating-direction-implicit-finite-difference-time-domain （ADI-FDTD） method including lumped models is analyzed. Three common lumped models are investigated： resistor, capacitor, and inductor, and three different formulations for each model are analyzed： the explicit, semi-implicit and implicit schemes. Analysis results show that the extended ADI-FDTD algorithm is not unconditionally stable in the explicit scheme case, and the stability criterion depends on the value of lumped models, but in the semi-implicit and implicit cases, the algorithm is stable. Finally, two simple microstrip circuits including lumped elements are simulated to demonstrate validity of the theoretical results.

Lumped Parameter Outflow Models for 1-D Blood Flow Simulations:Effect on Pulse Waves and Parameter Estimation

Several lumped parameter,or zero-dimensional(0-D),models of the microcirculation are coupled in the time domain to the nonlinear,one-dimensional(1-D)equations of blood flow in large arteries.A linear analysis of the coupled system,together with in vivo observations,shows that:(i)an inflow resistance that matches the characteristic impedance of the terminal arteries is required to avoid non-physiological wave reflections;(ii)periodic mean pressures and flow distributions in large arteries depend on arterial and peripheral resistances,but not on the compliances and inertias of the system,which only affect instantaneous pressure and flow waveforms;(iii)peripheral inertias have a minor effect on pulse waveforms under normal conditions;and(iv)the time constant of the diastolic pressure decay is the same in any 1-D model artery,if viscous dissipation can be neglected in these arteries,and it depends on all the peripheral compliances and resistances of the system.Following this analysis,we propose an algorithm to accurately estimate peripheral resistances and compliances from in vivo data.This algorithm is verified against numerical data simulated using a 1-D model network of the 55 largest human arteries,in which the parameters of the peripheral windkessel outflow models are known a priori.Pressure and flow waveforms in the aorta and the first generation of bifurcations are reproduced with relative root-mean-square errors smaller than 3%.

Rigorous theoretical derivation of lumped models to transmission line systems

By virtue of the negative electric parameter concept,i.e.negative lumped resistance,inductance,conductance and capacitance（N-RLGC）,the lumped equivalent models of transmission line systems,including the circuit model,two-portπ-network and T-network,are given.We start from the N-segment-ladder-like equivalent networks composed distributed parameters,and achieve the input impedance in the form of a continued fraction. Utilizing the continued fraction theory,the expressions of input impedance are obtained under three kinds of extreme cases,i.e.the load impedances are equal to zero,infinity and characteristic impedance,respectively.When the number of segment N is limited to infinity,they are transformed to lumped elements.Comparison between the distributed model and lumped model of transmission lines,the expression of tanh yd,which is the key term in the transmission line equations,are obtained by RLGC,furthermore,according to input admittance,admittance matrix and ABCD matrix of transmission lines,the lumped equivalent circuit models,π-networks and T-networks have been given.The models are verified in the frequency and time domain,respectively,showing that the models are accurate and efficient.