In this paper, we studied the effect of Gaussian coloured noise on the formation and instability of spiral waves described by one class of modified FitzHugh Nagumo equation. It was found that Gaussian coloured noise p...In this paper, we studied the effect of Gaussian coloured noise on the formation and instability of spiral waves described by one class of modified FitzHugh Nagumo equation. It was found that Gaussian coloured noise plays a constructive role in the formation, transition and instability of spiral wave. Too weak or too strong noise may act against the formation of spiral waves. At a certain noise level, spiral wave is maintained in a medium, in which spiral wave cannot be observed in the absence of the noise. It is difficult to make a stable spiral wave into unstable state by Gaussian coloured noise, unless the noise level is very high. The parameter regions of Gaussian coloured noise for spiral forming and spiral instability were given and discussed with numerical simulations.展开更多
This paper investigates the phenomenon of stochastic resonance in a single-mode laser driven by time-modulated correlated coloured noise sources. The power spectrum and signal-to-noise ratio R of the laser intensity a...This paper investigates the phenomenon of stochastic resonance in a single-mode laser driven by time-modulated correlated coloured noise sources. The power spectrum and signal-to-noise ratio R of the laser intensity are calculated by the linear approximation. The effects caused by noise self-correlation time τ1, τ2 and cross-correlated time τ3 for stochastic resonance are analysed in two ways： τ1, τ2 and τ3 are taken to be the independent variables and the parameters respectively. The effects of the gain coefficient F and loss coefficient K on the stochastic resonance are also discussed. It is found that besides the presence of the standard form and the broad sense of stochastic resonance, the number of extrema in the curve of R versus K is reduced with the increase of the gain coefficient Г.展开更多
By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calcu...By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calculate the power spectrum and signal-to-noise ratio （SNR） of the laser intensity. The results show that the SNR appears typical stochastic resonance with the variation of intensity of the pump noise and quantum noise. As the amplitude of a modulated signal has effects on the SNR, it shows suppression, monotone increasing, stochastic resonance, and multiple stochastic resonance with the variation of the frequency of a carrier signal and modulated signal.展开更多
The phenomenon of stochastic resonance is investigated in an asymmetric bistable system with coloured noises. The approximate Fokker Planck equation is derived based on the Novikov theorem and the Fox approach. By app...The phenomenon of stochastic resonance is investigated in an asymmetric bistable system with coloured noises. The approximate Fokker Planck equation is derived based on the Novikov theorem and the Fox approach. By applying the two-state theory, the expression of the signal-to-noise ratio is obtained in the adiabatic limit. The effects of the noise parameters on signal-to-ratio are discussed. It is found that the stochastic resonance phenomena appear in most cases and disappear in some special cases.展开更多
Combining GPS and BDS technology to monitor the deformation of long-span railway bridges with stricter deformation control requirements is of significance to the safety and control of the bridge and the safety of rail...Combining GPS and BDS technology to monitor the deformation of long-span railway bridges with stricter deformation control requirements is of significance to the safety and control of the bridge and the safety of railway traffic.Previous studies have ignored the influence of coloured noise in the deformation time series.This is not conducive to accurate deformation analysis of long-span railway bridges.Therefore,GPS,BDS and GPS/BDS monitoring data of Ganjiang Bridge located in Ganzhou city,Jiangxi Province,China are adopted in this paper to filter the coloured noise in the deformation time series by principal component analysis(PCA),and the influence of coloured noise on the deformation analysis results of railway bridge is analysed.The experimental results show that the diurnal temperature difference causes the mid-span and the tower of the railway cable-stayed bridge to deform with a period of about one day in the vertical and longitudinal directions,respectively.Ignoring colored noise will make the uncertainty of the deformation parameter estimation overly optimistic.PCA can significantly reduce the coloured noise,and thus reduce the uncertainty of deformation parameter estimation by about 73%.Moreover,the average difference between the daily periodic motion amplitudes of the monitoring points obtained by using GPS and BDS deformation time series is 1.65 mm.The use of GPS/BDS deformation time series is not only helpful to reduce the influence of coloured noise,but also can reduce the difference between amplitude analysis results obtained from GPS and BDS deformation time series.展开更多
The diffusion in a harmonic oscillator driven by coloured noises ξ（t） and η（t） with coloured cross-correlation in which one of the noises is modulated by a biased periodic signal is investigated. The exact expre...The diffusion in a harmonic oscillator driven by coloured noises ξ（t） and η（t） with coloured cross-correlation in which one of the noises is modulated by a biased periodic signal is investigated. The exact expression of diffusion coefficient d as a function of noise parameter, signal parameter, and oscillator frequency is derived. The findings in this paper are as follows. 1） The curves of d versus noise intensity D and d versus noises cross-correlation time z3 exist as two different phases. The transition between the two phases arises from the change of the cross-correlation coefficient A of the two Ornstein-Uhlenbeck （O-U） noises. 2） Changing the value of T3, the curves of d versus Q, the intensity of colored noise that is modulated by the signal, can transform from a phase having a minimum to a monotonic phase. 3） Changing the value of signal amplitude A, d versus Q curves can transform from a phase having a minimum to a monotonic phase. The above-mentioned results demonstrate that a like noise-induced transition appears in the model.展开更多
This paper investigates a genotype selection model subjected to both a multiplicative coloured noise and an additive coloured noise with different correlation time τ1 and τ2 by means of the numerical technique. By d...This paper investigates a genotype selection model subjected to both a multiplicative coloured noise and an additive coloured noise with different correlation time τ1 and τ2 by means of the numerical technique. By directly simulating the Langevin Equation, the following results are obtained. （1） The multiplicative coloured noise dominates, however, the effect of the additive coloured noise is not neglected in the practical gene selection process. The selection rate μ decides that the selection is propitious to gene A haploid or gene B haploid. （2） The additive coloured noise intensity and the correlation time τ2 play opposite roles. It is noted that α and τ2 can not separate the single peak, while can make the peak disappear and ^-2 can make the peak be sharp. （3） The multiplicative coloured noise intensity D and the correlation time τ1 can induce phase transition, at the same time they play opposite roles and the reentrance phenomenon appears. In this case, it is easy to select one type haploid from the group with increasing D and decreasing τ1.展开更多
In this paper, the effect of every parameter （including p, q, r, λ, τ） on the mean first-passage time （MFPT） is investigated in an asymmetric bistable system driven by colour-correlated noise. The expression of ...In this paper, the effect of every parameter （including p, q, r, λ, τ） on the mean first-passage time （MFPT） is investigated in an asymmetric bistable system driven by colour-correlated noise. The expression of MFPT has been obtained by applying the steepest-descent approximation. Numerical results show that （1） the intensity of multiplicative noise p and the intensity of additive noise q play different roles in the MFPT of the system, （2） suppression appears on the curve of the MFPT with small λ （e.g. λ 〈 0.5） but there is a peak on the curve of the MFPT when λ is big （e.g. λ 〉 0.5）, and （3） with different values of r （e.g. r = 0.1, 0.5, 1.5）, the effort of τ on the MFPT is diverse.展开更多
基金Project supported partially by National Science Foundation of China (Grant No 10305005)the Fundamental Research Fund for Physics and Mathematic of Lanzhou University of China
文摘In this paper, we studied the effect of Gaussian coloured noise on the formation and instability of spiral waves described by one class of modified FitzHugh Nagumo equation. It was found that Gaussian coloured noise plays a constructive role in the formation, transition and instability of spiral wave. Too weak or too strong noise may act against the formation of spiral waves. At a certain noise level, spiral wave is maintained in a medium, in which spiral wave cannot be observed in the absence of the noise. It is difficult to make a stable spiral wave into unstable state by Gaussian coloured noise, unless the noise level is very high. The parameter regions of Gaussian coloured noise for spiral forming and spiral instability were given and discussed with numerical simulations.
文摘This paper investigates the phenomenon of stochastic resonance in a single-mode laser driven by time-modulated correlated coloured noise sources. The power spectrum and signal-to-noise ratio R of the laser intensity are calculated by the linear approximation. The effects caused by noise self-correlation time τ1, τ2 and cross-correlated time τ3 for stochastic resonance are analysed in two ways： τ1, τ2 and τ3 are taken to be the independent variables and the parameters respectively. The effects of the gain coefficient F and loss coefficient K on the stochastic resonance are also discussed. It is found that besides the presence of the standard form and the broad sense of stochastic resonance, the number of extrema in the curve of R versus K is reduced with the increase of the gain coefficient Г.
基金supported by the Key Project Scientific Research Foundation from the Education Department of Hubei Province of China(Grant No D200725001)
文摘By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calculate the power spectrum and signal-to-noise ratio （SNR） of the laser intensity. The results show that the SNR appears typical stochastic resonance with the variation of intensity of the pump noise and quantum noise. As the amplitude of a modulated signal has effects on the SNR, it shows suppression, monotone increasing, stochastic resonance, and multiple stochastic resonance with the variation of the frequency of a carrier signal and modulated signal.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10672074)
文摘The phenomenon of stochastic resonance is investigated in an asymmetric bistable system with coloured noises. The approximate Fokker Planck equation is derived based on the Novikov theorem and the Fox approach. By applying the two-state theory, the expression of the signal-to-noise ratio is obtained in the adiabatic limit. The effects of the noise parameters on signal-to-ratio are discussed. It is found that the stochastic resonance phenomena appear in most cases and disappear in some special cases.
基金the National Key Research and Development Program under Grant 2021YFB2600400the Science And Technology Project For China Railway Construction Corporation Limited under Grant 2022-A 02,Wuhan Enterprise Technology Innovation Project under Grant 2019010702011314+4 种基金Guangxi Science And Technology Plan Project under Grant AD19110107Guangxi Natural Science Foundation under Grant 2018GXNSFBA050006the Project To Improve The Basic Research Ability Of Young And MiddleAged Teachers In Guangxi Universities under Grant 2020KY06032Urban Spatial Information Engineering Beijing Key Laboratory Funded Project under Grant number 2020217Natural Science Foundation of Hubei Province under Grant 2020CFB282,National Natural Science Foundation of China under Grant 42264004.
文摘Combining GPS and BDS technology to monitor the deformation of long-span railway bridges with stricter deformation control requirements is of significance to the safety and control of the bridge and the safety of railway traffic.Previous studies have ignored the influence of coloured noise in the deformation time series.This is not conducive to accurate deformation analysis of long-span railway bridges.Therefore,GPS,BDS and GPS/BDS monitoring data of Ganjiang Bridge located in Ganzhou city,Jiangxi Province,China are adopted in this paper to filter the coloured noise in the deformation time series by principal component analysis(PCA),and the influence of coloured noise on the deformation analysis results of railway bridge is analysed.The experimental results show that the diurnal temperature difference causes the mid-span and the tower of the railway cable-stayed bridge to deform with a period of about one day in the vertical and longitudinal directions,respectively.Ignoring colored noise will make the uncertainty of the deformation parameter estimation overly optimistic.PCA can significantly reduce the coloured noise,and thus reduce the uncertainty of deformation parameter estimation by about 73%.Moreover,the average difference between the daily periodic motion amplitudes of the monitoring points obtained by using GPS and BDS deformation time series is 1.65 mm.The use of GPS/BDS deformation time series is not only helpful to reduce the influence of coloured noise,but also can reduce the difference between amplitude analysis results obtained from GPS and BDS deformation time series.
基金Project supported by the National Natural Science Foundation of China (Grant No 10275025)
文摘The diffusion in a harmonic oscillator driven by coloured noises ξ（t） and η（t） with coloured cross-correlation in which one of the noises is modulated by a biased periodic signal is investigated. The exact expression of diffusion coefficient d as a function of noise parameter, signal parameter, and oscillator frequency is derived. The findings in this paper are as follows. 1） The curves of d versus noise intensity D and d versus noises cross-correlation time z3 exist as two different phases. The transition between the two phases arises from the change of the cross-correlation coefficient A of the two Ornstein-Uhlenbeck （O-U） noises. 2） Changing the value of T3, the curves of d versus Q, the intensity of colored noise that is modulated by the signal, can transform from a phase having a minimum to a monotonic phase. 3） Changing the value of signal amplitude A, d versus Q curves can transform from a phase having a minimum to a monotonic phase. The above-mentioned results demonstrate that a like noise-induced transition appears in the model.
基金Project supported by the Natural Science Foundation of Yunnan province of China (Grant No 2006A0002M)the Science Foundation of Baoji University of Science and Arts of China (Grant No Zk0697)
文摘This paper investigates a genotype selection model subjected to both a multiplicative coloured noise and an additive coloured noise with different correlation time τ1 and τ2 by means of the numerical technique. By directly simulating the Langevin Equation, the following results are obtained. （1） The multiplicative coloured noise dominates, however, the effect of the additive coloured noise is not neglected in the practical gene selection process. The selection rate μ decides that the selection is propitious to gene A haploid or gene B haploid. （2） The additive coloured noise intensity and the correlation time τ2 play opposite roles. It is noted that α and τ2 can not separate the single peak, while can make the peak disappear and ^-2 can make the peak be sharp. （3） The multiplicative coloured noise intensity D and the correlation time τ1 can induce phase transition, at the same time they play opposite roles and the reentrance phenomenon appears. In this case, it is easy to select one type haploid from the group with increasing D and decreasing τ1.
基金Project supported by the National Natural Science Foundation of China （Grants Nos 10472091, 10332030 and 10502042） and the Graduate Starting Seed Fund of Northwestern Polytechnical University （Grant No Z200655）.
文摘In this paper, the effect of every parameter （including p, q, r, λ, τ） on the mean first-passage time （MFPT） is investigated in an asymmetric bistable system driven by colour-correlated noise. The expression of MFPT has been obtained by applying the steepest-descent approximation. Numerical results show that （1） the intensity of multiplicative noise p and the intensity of additive noise q play different roles in the MFPT of the system, （2） suppression appears on the curve of the MFPT with small λ （e.g. λ 〈 0.5） but there is a peak on the curve of the MFPT when λ is big （e.g. λ 〉 0.5）, and （3） with different values of r （e.g. r = 0.1, 0.5, 1.5）, the effort of τ on the MFPT is diverse.
