The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of...The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of glass-ceramics.And the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.展开更多
In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ...In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).展开更多
The presence of Li_(2)Si_(2)O_(5) and LiAlSi_(4)O_(10) could effectively improve the elastic modulus and transmittance of lithium disilicate(LD)glass-ceramics.Through synergistically modulation of the crystal content ...The presence of Li_(2)Si_(2)O_(5) and LiAlSi_(4)O_(10) could effectively improve the elastic modulus and transmittance of lithium disilicate(LD)glass-ceramics.Through synergistically modulation of the crystal content and grain size,we obtained high strength and high transmittance of LD glass-ceramics.The optimal sample had a high transmittance of 90.3%,the hardness was 7.72 GPa,the fracture toughness was 1.07 MPa·m^(1/2),and the elastic modulus was 103.1 GPa.展开更多
There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal resistance.It is a promising idea to shape inorganic materials in three-dimen...There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal resistance.It is a promising idea to shape inorganic materials in three-dimensional(3D)forms to reduce their weight while maintaining high mechanical properties.A popular strategy for the preparation of 3D inorganic materials is to mold the organic–inorganic hybrid photoresists into 3D micro-and nano-structures and remove the organic components by subsequent sintering.However,due to the discrete arrangement of inorganic components in the organic-inorganic hybrid photoresists,it remains a huge challenge to attain isotropic shrinkage during sintering.Herein,we demonstrate the isotropic sintering shrinkage by forming the consecutive–Si–O–Si–O–Zr–O–inorganic backbone in photoresists and fabricating 3D glass–ceramic nanolattices with enhanced mechanical properties.The femtosecond(fs)laser is used in two-photon polymerization(TPP)to fabricate 3D green body structures.After subsequent sintering at 1000℃,high-quality 3D glass–ceramic microstructures can be obtained with perfectly intact and smooth morphology.In-suit compression experiments and finite-element simulations reveal that octahedral-truss(oct-truss)lattices possess remarkable adeptness in bearing stress concentration and maintain the structural integrity to resist rod bending,indicating that this structure is a candidate for preparing lightweight and high stiffness glass–ceramic nanolattices.3D printing of such glasses and ceramics has significant implications in a number of industrial applications,including metamaterials,microelectromechanical systems,photonic crystals,and damage-tolerant lightweight materials.展开更多
Dear Editor, As a promising multi-agent systems(MASs) operation, autonomous interception has attracted more and more attentions in these years, where defenders prevent intruders from reaching destinations.So far, most...Dear Editor, As a promising multi-agent systems(MASs) operation, autonomous interception has attracted more and more attentions in these years, where defenders prevent intruders from reaching destinations.So far, most of the relevant methods are applied in ideal environments without agent damages. As a remedy, this letter proposes a more realistic interception method for MASs suffered by damages.展开更多
Nitrogen-14(^(14)N)overtone(OT)spectroscopy under fast magic angle spinning(MAS)conditions(>60 kHz)has emerged as a powerful technique for observing correlations and distances between ^(14)N and ^(1)H,owing to the ...Nitrogen-14(^(14)N)overtone(OT)spectroscopy under fast magic angle spinning(MAS)conditions(>60 kHz)has emerged as a powerful technique for observing correlations and distances between ^(14)N and ^(1)H,owing to the absence of the first-order quadrupolar broadenings.In addition,^(14)N^(OT) allows selective manipulation of ^(14)N nuclei for each site.Despite extensive theoretical and experimental studies,the spin dynamics of ^(14)N^(OT) remains under debate.In this study,we conducted experimental investigations to assess the spin dynamics of ^(14)N^(OT) using the rotational-echo saturation-pulse double-resonance(RESPDOR)sequence,which monitors population transfer induced by a^(14)N^(OT) pulse.The ^(14)N^(OT) spin dynamics is well represented by a model of a two-energy-level system.Unlike spin-1/2,the maximum excitation efficiency of ^(14)N^(OT) coherences of powdered solids,denoted by p,depends on the radiofrequency field(rf-field)strength due to orientation dependence of effective nutation fields even when pulse lengths are optimized.It is also found that the p factor,contributing to the ^(14)N^(OT) spin dynamics,is nearly independent of the B0 field.Consequently,the filtering efficiency of RESPDOR experiments exhibits negligible dependence on B0 when the ^(14)N^(OT) pulse length is optimized.The study also identifies the optimal experimental conditions for ^(14)N^(OT)/^(1)H RESPDOR correlation experiments.展开更多
The crystallization behavior and transparent property of MgO-A1203-SiO2 （MAS） glasses with TiO2 and TiO2＋ZrO2 as nucleating agents were discussed by differential thermal analysis, X-ray diffraction, field emission-...The crystallization behavior and transparent property of MgO-A1203-SiO2 （MAS） glasses with TiO2 and TiO2＋ZrO2 as nucleating agents were discussed by differential thermal analysis, X-ray diffraction, field emission-environment scanning electron microscope, energy dispersive spectrum and UV-VIS-NIR scanning spectrophotometer. It was found that the glass crystallized at 950 ℃ with ZrO2 less than 3% could obtain transparent glass ceramic, which presented purple to colorless. With the nucleating agent additives （5% TIO2＋3% ZrO2）, the colorless transparent glass-ceramics with spinel as the main crystal phase could be prepared, and the transmittance reached about 80%. As the crystallized temperature increase to 1 000 ℃, besides spinel（MgA1204）, sapphirine （Mg3.5A19Si1.5O20） and ZrTiO4 precipitated from matrix glass, and the transmitance of glass-ceramic decreased.展开更多
为改善增程式电动汽车(EREV)燃油经济性,提出一种基于多智能体MAS(multi-agent system)组网技术的增程式电动汽车能量管理策略。在Simulink环境中搭建EREV整车动力学模型,利用JADE(Java development framework)平台构建各动力部件智能...为改善增程式电动汽车(EREV)燃油经济性,提出一种基于多智能体MAS(multi-agent system)组网技术的增程式电动汽车能量管理策略。在Simulink环境中搭建EREV整车动力学模型,利用JADE(Java development framework)平台构建各动力部件智能体以实现组网,采用MAS组网技术对恒温器式能量管理策略进行改进,通过MACSimJX组件将动力部件多智能体组网系统与Simulink整车动力学模型连接,并在WLTC工况下进行仿真验证。仿真结果表明:与动态规划控制策略相比,MAS组网技术的整车节油率为3.3%,电能消耗高出1.7%,总能量消耗率减少1.4%;与传统电辅助控制策略相比,整车节油率为18.2%,电能损耗减少12.4%,总能量消耗率减少16.6%。MAS组网技术可以有效改善整车能量控制效果,并为混合动力汽车能量管理策略提供理论支撑和新的研究方法。展开更多
文摘The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of glass-ceramics.And the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.
基金Funded by State Key Laboratory of Silicate Materials for Ar-chitectures(Wuhan University of Technology)(No.2011DA105356)。
文摘In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).
基金Funded by the National Natural Science Foundation of China(No.52372014)the Key R&D Project of Hubei Province(No.2022BAA025)the Key R&D Project of Jincheng City(No.20220120)。
文摘The presence of Li_(2)Si_(2)O_(5) and LiAlSi_(4)O_(10) could effectively improve the elastic modulus and transmittance of lithium disilicate(LD)glass-ceramics.Through synergistically modulation of the crystal content and grain size,we obtained high strength and high transmittance of LD glass-ceramics.The optimal sample had a high transmittance of 90.3%,the hardness was 7.72 GPa,the fracture toughness was 1.07 MPa·m^(1/2),and the elastic modulus was 103.1 GPa.
基金supported by the National Key Research and Development Program of China(2020YFA0715000)the Hainan Provincial Joint Project of Sanya Yazhou Bay Science and Technology City(2021JJLH0058)the Guangdong Basic and Applied Basic Research Foundation(2021B1515120041)。
文摘There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal resistance.It is a promising idea to shape inorganic materials in three-dimensional(3D)forms to reduce their weight while maintaining high mechanical properties.A popular strategy for the preparation of 3D inorganic materials is to mold the organic–inorganic hybrid photoresists into 3D micro-and nano-structures and remove the organic components by subsequent sintering.However,due to the discrete arrangement of inorganic components in the organic-inorganic hybrid photoresists,it remains a huge challenge to attain isotropic shrinkage during sintering.Herein,we demonstrate the isotropic sintering shrinkage by forming the consecutive–Si–O–Si–O–Zr–O–inorganic backbone in photoresists and fabricating 3D glass–ceramic nanolattices with enhanced mechanical properties.The femtosecond(fs)laser is used in two-photon polymerization(TPP)to fabricate 3D green body structures.After subsequent sintering at 1000℃,high-quality 3D glass–ceramic microstructures can be obtained with perfectly intact and smooth morphology.In-suit compression experiments and finite-element simulations reveal that octahedral-truss(oct-truss)lattices possess remarkable adeptness in bearing stress concentration and maintain the structural integrity to resist rod bending,indicating that this structure is a candidate for preparing lightweight and high stiffness glass–ceramic nanolattices.3D printing of such glasses and ceramics has significant implications in a number of industrial applications,including metamaterials,microelectromechanical systems,photonic crystals,and damage-tolerant lightweight materials.
基金supported by the Science and Technology Project of State Grid Corporation of China, China (5100202199557A-0-5-ZN)。
文摘Dear Editor, As a promising multi-agent systems(MASs) operation, autonomous interception has attracted more and more attentions in these years, where defenders prevent intruders from reaching destinations.So far, most of the relevant methods are applied in ideal environments without agent damages. As a remedy, this letter proposes a more realistic interception method for MASs suffered by damages.
文摘Nitrogen-14(^(14)N)overtone(OT)spectroscopy under fast magic angle spinning(MAS)conditions(>60 kHz)has emerged as a powerful technique for observing correlations and distances between ^(14)N and ^(1)H,owing to the absence of the first-order quadrupolar broadenings.In addition,^(14)N^(OT) allows selective manipulation of ^(14)N nuclei for each site.Despite extensive theoretical and experimental studies,the spin dynamics of ^(14)N^(OT) remains under debate.In this study,we conducted experimental investigations to assess the spin dynamics of ^(14)N^(OT) using the rotational-echo saturation-pulse double-resonance(RESPDOR)sequence,which monitors population transfer induced by a^(14)N^(OT) pulse.The ^(14)N^(OT) spin dynamics is well represented by a model of a two-energy-level system.Unlike spin-1/2,the maximum excitation efficiency of ^(14)N^(OT) coherences of powdered solids,denoted by p,depends on the radiofrequency field(rf-field)strength due to orientation dependence of effective nutation fields even when pulse lengths are optimized.It is also found that the p factor,contributing to the ^(14)N^(OT) spin dynamics,is nearly independent of the B0 field.Consequently,the filtering efficiency of RESPDOR experiments exhibits negligible dependence on B0 when the ^(14)N^(OT) pulse length is optimized.The study also identifies the optimal experimental conditions for ^(14)N^(OT)/^(1)H RESPDOR correlation experiments.
基金Funded by the National Natural Science Foundation of China(No.50472309)
文摘The crystallization behavior and transparent property of MgO-A1203-SiO2 （MAS） glasses with TiO2 and TiO2＋ZrO2 as nucleating agents were discussed by differential thermal analysis, X-ray diffraction, field emission-environment scanning electron microscope, energy dispersive spectrum and UV-VIS-NIR scanning spectrophotometer. It was found that the glass crystallized at 950 ℃ with ZrO2 less than 3% could obtain transparent glass ceramic, which presented purple to colorless. With the nucleating agent additives （5% TIO2＋3% ZrO2）, the colorless transparent glass-ceramics with spinel as the main crystal phase could be prepared, and the transmittance reached about 80%. As the crystallized temperature increase to 1 000 ℃, besides spinel（MgA1204）, sapphirine （Mg3.5A19Si1.5O20） and ZrTiO4 precipitated from matrix glass, and the transmitance of glass-ceramic decreased.
文摘为改善增程式电动汽车(EREV)燃油经济性,提出一种基于多智能体MAS(multi-agent system)组网技术的增程式电动汽车能量管理策略。在Simulink环境中搭建EREV整车动力学模型,利用JADE(Java development framework)平台构建各动力部件智能体以实现组网,采用MAS组网技术对恒温器式能量管理策略进行改进,通过MACSimJX组件将动力部件多智能体组网系统与Simulink整车动力学模型连接,并在WLTC工况下进行仿真验证。仿真结果表明:与动态规划控制策略相比,MAS组网技术的整车节油率为3.3%,电能消耗高出1.7%,总能量消耗率减少1.4%;与传统电辅助控制策略相比,整车节油率为18.2%,电能损耗减少12.4%,总能量消耗率减少16.6%。MAS组网技术可以有效改善整车能量控制效果,并为混合动力汽车能量管理策略提供理论支撑和新的研究方法。
