Investigation on Magnetorheological Effect of Novel Self-healing Magnetorheological Elastomers

Magnetorheological elastomers(MREs)hold significant promise in various fields such as automotive engineering,and civil engineering,where they serve as intelligent materials.Depending on the application of an external magnetic field,these materials exhibit varying magnetorheological and viscoelastic properties,including shear stress,yield stress,dynamic moduli,and damping.In this work,a new type of MRE,termed self-healing MREs(SH-MREs),has been developed by adding a novel self-healing agent into existing MREs.The dynamic modulus and loss factor of SH-MREs with different compositions have been characterized under various conditions of frequency,temperature,and strain.The results show that as the strain value increases,the loss factor also increases.Moreover,the loss factor initially increases and then decreases with increasing magnetic field strength.Although higher concentrations of ferromagnetic particles increase the loss factor,they enhance the operational range due to their better responsiveness to magnetic fields.SH-MREs demonstrate improved damping capabilities,attributed to the formation of coordination bonds between ferromagnetic particles and the self-healing agent.The stable structure increases the viscosity of MREs.The results of the regression model suggest a direct proportionality between sensitivity to the magnetic field and the ferromagnetic particle concentration.

Passive Magnetorheological Fluid Filled Hydraulic Engine Mount

Using magnetorheological (MR) fluids in hydraulic engine mount for damping vehicle noise and vibration is opposed firstly, the structure of passive type and its mechanical model are described. The analysis of the experimental data show that the dynamic characteristics of MR mount such as dynamic stiffness and loss angles vary distinctly as the excitation frequency, and MR fluids as one type of attracting controllable fluids are fit for hydraulic engine mounts. The author advises to work out potentialities of MR fluids, the semi control or active control MR fluids filled hydraulic engine mount must be developed.

Friction Behavior of Magnetorheological Fluids with Different Material Types and Magnetic Field Strength

Magnetorheological （MR） fluid is a type of a smart material that can control its mechanical properties under a magnetic field. Iron particles in MR fluid form chain structures in the direction of an applied magnetic field, which is known as MR effect, resulting in variation of stiffness, shear modulus, damping and tribological characteristics of MR fluid. As MR effect depends on the density of particles in the fluid or the strength of a magnetic field, the experiments are conducted to evaluate the friction property under reciprocating motion by changing the types of MR fluid and the strength of a magnetic field. The material of aluminum, brass, and steel are chosen for specimen as they are the most common material in mechanical applications. The surfaces of specimen are also observed by optical microscope before and after experiments to compare the surfaces with test conditions. The comparing results show that the friction coefficient increases as the strength of a magnetic field increases in regardless of types of MR fluid or the material. Also the density of particle in MR fluid affects the friction characteristic. The results from this research can be used to improve the performance of mechanical applications using MR fluid.

Optimizing Control for Rotor Vibration with Magnetorheological Fluid Damper

The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built and simulated in Matlab/Simulink to analyze the rotor vibration characteristics and the vibration reduction effect of the MRF damper.Based on the numerical simulation analysis,an optimizing control strategy using pattern search method was proposed and designed.The control system was constructed on a test rotor bench and experiment validations on the effectiveness of the proposed control strategy were conducted.Experimental results show that rotor vibration caused by unbalance can be well controlled whether in resonance region(70%)or in non-resonance region(30%).An irregular vibration amplitude jump can be suppressed with the optimization strategy.Furthermore,it is found that the rapidity of transient response and efficiency of optimizing technique depend on the pattern search step.The presented strategies and control system can be extended to multi-span(more than two or three spans)rotor system.It provides a powerful technical support for the extension and application in target and control for shafting vibration.

Squeeze-Strengthening Effect of Silicone Oil-based Magnetorheological Fluid

In order to study the squeeze-strengthening effect of silicone oil-based magnetorheological fluid （MRF）, theoretical basis of disc squeezing brake was presented and a squeezing braking characteristics test-bed for MRF was designed. Moreover, relevant experiments were carded out and the relationship between squeezing pressure and braking torque was proposed. Experiments results showed that the yield stress of MRF improved linearly with the increasing of external squeezing pressure and the braking torque increased three times when external squeezing pressure achieved 2 MPa.

DESIGN METHOD OF MAGNETORHEOLOGICAL FLUID SHOCK ABSORBER FOR CAR SUSPENSION

The Bingham constitutive model, which is previously used in depiction of magnetorheological （MR） fluids rheological behaviors for design devices, exhibits discontinuous characteristics in representation of pre-yield behaviors and post-yield behaviors. A Biviscous constitutive model is presented to depict rheological behaviors of MR fluids and design automotive shock absorber. Quasi-static flow equations of MR fluids in annular channels are set theoretically up based on Navier-Stokes equations and several rational simplifications are made. And both flow boundary conditions and flow compatibilities conditions are established. Meantime, analytical velocity profiles of MR fluids though annular channels are obtained via solution of the quasi-static flow equations using Biviscous constitutive model. The prediction methodology of damping force offered by MR fluid shock absorber is formulated and damping performances are predicated in order to determine design parameters. MR fluid shock absorber for Mazda 323 car suspension is designed and fabricated in Chongqing University, China. Measurements from sinusoidal displacement cycle by Shanchuan Shock Absorber Ltd. of China North Industry Corporation reveal that the analytical methodology and design theory are reasonable.

Sliding wear behavior of magnetorheological fluid for brass with and without magnetic field

A pin-on-disc wear apparatus was used to carry out the tribological experiment of brass to investigate the effect of a magnetorheological （MR） fluid on the interfacial surface with and without magnetic field. A series of tests were performed at the loads of 20-100 N and rotating speeds of 127-425 r/min for 2 h. The friction coefficient and wear rate were monitored by the wear apparatus, while the microstructures of the worn surfaces were observed by scanning electron microscope （SEM）. In addition, the chemical composition of worn surfaces was analyzed by energy dispersive X-ray spectroscopy （EDS）. Test results show different friction and wear performance of the MR fluid with and without magnetic field. At the same time, the effects of various normal loads and rotating speeds on the tribological behavior were investigated. Through the investigation of the morphologies of the wom surfaces under the magnetic field, it is found that the MR particles are clearly evident on the wom surface and the plastic flow of ridges causes the lateral extrusion. This directly indicates that abrasive wear is the predominant wear mechanism observed with MR fluid.

Optimizing control of a two-span rotor system with magnetorheological fluid dampers

A control system aims at vibration reduction in a two-span rotor system with two shear mode magnetorheological （MRF） dampers is designed. A finite element model of the MRF damper- rotor system is built and used to analyze the rotor vibration characteristics. Based on Hooke and Jeeves algorithm and the numerical simulation analysis, an optimal appropriate controller is proposed and designed. Experimental results show that rotor vibration caused by unbalance is well controlled （ first critical speed region 37% , second critical speed region 42% ）. To reflect advantages of optimi- zing strategy presented and validate the intelligent optimization control technology, detailed experi- ments were developed on a two-span rotor-vibration-control platform. The influence on accuracy, rapidity and stability of optimizing control for rotor vibration are analyzed. It provides a powerful technical support for the extension and application in target and control for shafting vibration.

Analysis and Design of Cylindrical Magnetorheological Fluid Brake

Magnetorheological (MR) fluids consist of stable suspensions of magnetic particles in a carrying fluid such as water or silicone oils. The magnetorheological response of MR fluids results from the polarization induced in suspended particles by application of an external magnetic field. The interaction between the induced dipoles causes the particles to form columnar structure, parallel to the applied field. These chain-like structures restrict the motion of fluids, thereby increasing the viscosity and yield stress of the MR fluids. These mechanical characteristics allow for the construction of magnetically controlled device such as the MR fluids rotary brakes. However, there has been little information published about the design of MR fluid brakes. In this paper the design of the cylindrical MR fluid brake is investigated theoretically. Bingham model is used to characterize the constitutive behaviors of the MR fluids subject to an external magnetic field. The operational principle of the cylindrical MR fluid brake is presented. The theoretical method is developed to analyze the transmission properties of the torque of the cylindrical MR fluid brake. An engineering expression for the torque is derived to provide the theoretical foundations in the design of the cylindrical MR fluid brake. Based on this equation the volume and thickness of the annular MR fluids within the brake is expressed as functions of the desired ratio of torques with saturated magnetic field and without external field, the controlled mechanical power and the MR fluid material properties. The parameters of the thickness and width of the fluid in the brake can be calculated from the obtained equations when the required mechanical power level, the desired torque ratio are specified.

Review of magnetorheological (MR) fluids and its applications in vibration control

Magnetorheological (MR) fluids are now well established as one of the leading materials for use in controllable structures and systems. Commercial application of MR fluids in various fields, particularly in the vibration control, has grown rapidly over the past few years. In this paper, properties of magnetorheological (MR) fluids ,its applications in suspensions of vehicles, suspension of trains, high buildings cable-stayed bridges have been discussed. The scope of MR fluids in future, problems and some suggestions are also presented. Finally, effectiveness of MR fluids in vibration control of marine diesel engine through experiment is briefly discussed by the author.

Study on Electromagnetorheological Fluid Containing CuPc-Fe_3O_4 Nanoparticles Composite

Electromagnetorheological (EMR) fluids containing CuPc-Fe3O4 nanoparetictes composite were prepared and their properties were studied. The results show that AT of this kind of EMR fluids increases with the increments of applied electric field, magnetic field and volume fraction of the nanoparticles composite. Ar has an approximate linear relationship with γ. When an electric and magnetic field are applied simultaneously, the EMR fluids have a synergistic effect. The EMR fluids have a good long-term stability.

Effect of fracture fluid flowback on shale microfractures using CT scanning

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional reservoirs.At the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not applicable.In this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is established.Then,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface roughness.The flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

Synthetic polymers:A review of applications in drilling fluids

With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complications.Currently,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling process.However,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization reactions.SPs provide substantial flexibility in their design.Moreover,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling fluids.They can be classified based on chemical ingredients,type of reaction,and their responses to heating.However,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep wells.Thus,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling fluids.The contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in detail.The mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also described.The typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also discussed.Economic issues also impact the applications of SPs in drilling fluids.Consequently,the cost of the most relevant SPs,and the monomers used in their synthesis,are assessed.Environmental impacts of SPs when deployed in drilling fluids,and their manufacturing processes are identified,together with advances in SP-treatment methods aimed at reducing those impacts.Recommendations for required future research addressing SP property and performance gaps are provided.

Reservoir quality evaluation of the Narimba Formation in Bass Basin,Australia:Implications from petrophysical analysis,sedimentological features,capillary pressure and wetting fluid saturation

The evaluation of reservoir quality was accomplished on the Late Paleocene to Early Eocene Narimba Formation in Bass Basin,Australia.This study involved combination methods such as petrophysical analysis,petrography and sedimentological studies,reservoir quality and fluid flow units from derivative parameters,and capillary pressure and wetting fluid saturation relationship.Textural and diagenetic features are affecting the reservoir quality.Cementation,compaction,and presence of clay minerals such as kaolinite are found to reduce the quality while dissolution and secondary porosity are noticed to improve it.It is believed that the Narimba Formation is a potential reservoir with a wide range of porosity and permeability.Porosity ranges from 3.1%to 25.4%with a mean of 15.84%,while permeability ranges between 0.01 mD and 510 mD,with a mean of 31.05 mD.Based on the heterogenous lithology,the formation has been categorized into five groups based on permeability variations.Group I showed an excellent to good quality reservoir with coarse grains.The impacts of both textural and diagenetic features improve the reservoir and producing higher reservoir quality index(RQI)and flow zone indicators(FZI)as well as mostly mega pores.The non-wetting fluid migration has the higher possibility to flow in the formation while displacement pressure recorded as zero.Group II showed a fair quality reservoir with lower petrophysical properties in macro pores.The irreducible water saturation is increasing while the textural and digenetic properties are still enhancing the reservoir quality.Group III reflects lower quality reservoir with mostly macro pores and higher displacement pressure.It may indicate smaller grain size and increasing amount of cement and clay minerals.Group IV,and V are interpreted as a poor-quality reservoir that has lower RQI and FZI.The textural and digenetic features are negatively affecting the reservoir and are leading to smaller pore size and pore throat radii(r35)values to be within the range of macro,meso-,micro-,and nano pores.The capillary displacement pressure curves of the three groups show increases reaching the maximum value of 400 psia in group V.Agreement with the classification of permeability,r35 values,and pore type can be used in identifying the quality of reservoir.

Effect of bubble morphology and behavior on power consumption in non-Newtonian fluids’aeration process

Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate of impeller, ventilation, rheological properties and bubble morphology in the reactor. In this perspective, through optimal computational fluid dynamics models and experiments, the relationship between power consumption, volumetric mass transfer rate(kLa) and initial bubble size(d0) was constructed to establish an efficient operation mode for the aeration process of non-Newtonian fluids. It was found that reducing the d0could significantly increase the oxygen mass transfer rate, resulting in an obvious decrease in the ventilation volume and impeller speed. When d0was regulated within 2-5 mm,an optimal kLa could be achieved, and 21% of power consumption could be saved, compared to the case of bubbles with a diameter of 10 mm.

Microscopic characteristics of tight sandstone reservoirs and their effects on the imbibition efficiency of fracturing fluids:A case study of the Linxing area,Ordos Basin

The Linxing area within the Ordos Basin exhibits pronounced reservoir heterogeneity and intricate micro-pore structures,rendering it susceptible to water-blocking damage during imbibition extraction.This study delved into the traits of tight sandstone reservoirs in the 8th member of the Shihezi Formation(also referred to as the He 8 Member)in the study area,as well as their effects on fracturing fluid imbibition.Utilizing experimental techniques such as nuclear magnetic resonance(NMR),high-pressure mercury intrusion(HPMI),and gas adsorption,this study elucidated the reservoir characteristics and examined the factors affecting the imbibition through imbibition experiments.The findings reveal that:①The reservoir,with average porosity of 8.40%and average permeability of 0.642×10^(-3)μm^(2),consists principally of quartz,feldspar,and lithic fragments,with feldspathic litharenite serving as the primary rock type and illite as the chief clay mineral;②Nano-scale micro-pores and throats dominate the reservoir,with dissolution pores and intercrystalline pores serving as predominant pore types,exhibiting relatively high pore connectivity;③Imbibition efficiency is influenced by petrophysical properties,clay mineral content,and microscopic pore structure.Due to the heterogeneity of the tight sandstone reservoir,microscopic factors have a more significant impact on the imbibition efficiency of fracturing fluids;④A comparative analysis shows that average pore size correlates most strongly with imbibition efficiency,followed by petrophysical properties and clay mineral content.In contrast,the pore type has minimal impact.Micropores are vital in the imbibition process,while meso-pores and macro-pores offer primary spaces for imbibition.This study offers theoretical insights and guidance for enhancing the post-fracturing production of tight sandstone reservoirs by examining the effects of these factors on the imbibition efficiency of fracturing fluids in tight sandstones.

Endoscopic intramural cystogastrostomy for treatment of peripancreatic fluid collection: A viewpoint from a surgeon

Percutaneous or endoscopic drainage is the initial choice for the treatment of peripancreatic fluid collection in symptomatic patients.Endoscopic transgastric fenestration(ETGF)was first reported for the management of pancreatic pseu-docysts of 20 patients in 2008.From a surgeon’s viewpoint,ETGF is a similar procedure to cystogastrostomy in that they both produce a wide outlet orifice for the drainage of fluid and necrotic debris.ETGF can be performed at least 4 wk after the initial onset of acute pancreatitis and it has a high priority over the surgical approach.However,the surgical approach usually has a better success rate because surgical cystogastrostomy has a wider outlet(>6 cm vs 2 cm)than ETGF.However,percutaneous or endoscopic drainage,ETGF,and surgical approach offer various treatment options for peripancreatic fluid collection patients based on their conditions.

An inverse analysis of fluid flow through granular media using differentiable lattice Boltzmann method

This study presents a method for the inverse analysis of fluid flow problems.The focus is put on accurately determining boundary conditions and characterizing the physical properties of granular media,such as permeability,and fluid components,like viscosity.The primary aim is to deduce either constant pressure head or pressure profiles,given the known velocity field at a steady-state flow through a conduit containing obstacles,including walls,spheres,and grains.The lattice Boltzmann method(LBM)combined with automatic differentiation(AD)(AD-LBM)is employed,with the help of the GPU-capable Taichi programming language.A lightweight tape is used to generate gradients for the entire LBM simulation,enabling end-to-end backpropagation.Our AD-LBM approach accurately estimates the boundary conditions for complex flow paths in porous media,leading to observed steady-state velocity fields and deriving macro-scale permeability and fluid viscosity.The method demonstrates significant advantages in terms of prediction accuracy and computational efficiency,making it a powerful tool for solving inverse fluid flow problems in various applications.

Characteristic analysis of magnetorheological fluid based on different carriers

In order to prepare special MRFs to satisfy the demands of tracked vehicle,two different carrier fluids were used to prepare MRFs.Preparation of MRF,which are based on carrier of special shock absorption fluid and 45# transformer oil,was finished.And characteristics of these samples were tested and analyzed.The results show that Tween-80 and Span-80 can improve the sedimentary stability,and the larger mass fraction can also increase the sedimentary stability.Using 45# transformer oil instead of special shock absorption fluid as a carrier of MRF,the shear yield stress remains nearly constant but the viscosity and the sedimentary stability are reduced.The MRF with diameter of 2.73 μm shows better sedimentary stability than that of the MRF with diameter of 2.30 μm,or 4.02 μm.Stearic acid obviously improves sedimentary stability and off-state viscosity,but has no function on the shear yield stress.In magnetic field of 237 kA/m,the shear yield stress of MRF based on special shock absorption fluid is 18.34 kPa and the shear yield stress of MRF based on 45# transformer oil is 14.26 kPa.

A New Theoretical Model about Shear Stress in Magnetorheological Fluids with Small Shear Deformation

Based on the single-chain structure model of magnetorheological fluids, a formu la for the calculation of shear stresses was established. The interaction force of two magnetic particles in an infinite single-chain was deduced using a new theoretical model which is founded on Ampere' molecular curr ent hypothesis, dipole theory and Ampere' law. Furthermore, the resultant force on a particle was then deduced by taking into account of the action caused by al l the other particles in the single-chain. A predictive formula for shear stres ses was made corresponding to the case that MR fluids were sheared by a small an gle and the calculating results fit well on the order with the yield stresses of the commercial MR fluids.