Effect of Fly Ash on Frost-Resistance and Chloride Ions Diffusion Properties of Marine Concrete

It is necessary to pay more attention to the durability of concrete undergoing freeze-thaw cycles and seawater attack simultaneously.Investigated are the effects of water-binder ratio,fly ash（FA）contents and air-entraining agent on resistance to frost and chloride diffusion of marine concrete blended with FA in natural seawater.The results show that fly ash does not improve the frost resistance of concrete but can improve its resistance to chloride diffusion by addition of less than 30%.The resistance to frost and chloride diffusion of FA concrete can be improved with the decrease of water-binder ratio,and FA may improve both of them simultaneously only being mixed with air-entraining agent.A ratio（named as R）of the frost-resisting durability factor to chloride diffusion coefficient can be used to evaluate the durability of marine concrete.Scanning electron microscope（SEM）analyses are consistent with the evaluations by the value of R.

Properties and Microstructure of Marine Concrete with Composite Mineral Admixture

The influences of compositing mineral admixtures on the regularity of mechanical property, workability, durability and microstructure of C50 marine concrete were investigated. The results show that the incorporation of mineral admixtures can improve the mechanical properties and workability of C50 marine concrete, 3 min-doped mineral admixture had excellent resistance to chloride ion permeability. The microscopic structure mixing mineral admixtures system was well-distributed and compact, little macroporeare can be found.

Sensitivity Study on Durability Variables of Marine Concrete Structures

In order to study the influence of parameters on durability of marine concrete structures, the parameter＇s sensitivity analysis was studied in this paper. With the Fick＇s 2nd law of diffusion and the deterministic sensitivity analysis method （DSA）, the sensitivity factors of apparent surface chloride content, apparent chloride diffusion coefficient and its time dependent attenuation factor were analyzed. The results of the analysis show that the impact of design variables on concrete durability was different. The values of sensitivity factor of chloride diffusion coefficient and its time dependent attenuation factor were higher than others. Relative less error in chloride diffusion coefficient and its time dependent attenuation coefficient induces a bigger error in concrete durability design and life prediction. According to probability sensitivity analysis （PSA）, the influence of mean value and variance of concrete durability design variables on the durability failure probability was studied. The results of the study provide quantitative measures of the importance of concrete durability design and life prediction variables. It was concluded that the chloride diffusion coefficient and its time dependent attenuation factor have more influence on the reliability of marine concrete structural durability. In durability design and life prediction of marine concrete structures, it was very important to reduce the measure and statistic error of durability design variables.

Oyster Cementation as Protective Covers for Exposed Marine Concrete

Cored concrete specimens from seawall exposed to marine environment for 22 years were evaluated by carbonation depth test,rapid chloride permeability test,absorption of water test and microstructure examination.The results show that concrete exposed to marine environment has smaller carbonation depth and carbonation depth of concrete exposed to tidal zone is less than that in splash zone.There are similar water absorption rate and chloride permeability for concrete exposed to splash zone compared with concrete exposed to splash zone removed 3mm surface layer.However,concrete exposed to tidal zone with bio-films has lower chloride permeability and water absorption rate than those of concrete exposed to tidal zone removed 3mm surface layer.In addition,Results of FE-SEM and EDAX indicate that concrete exposed to splash zone has loose structure,exposed finer aggregate and concrete exposed to tidal zone covers by dense structure of oyster cementation and shell.Microstructures analysis further verified that concrete covered with oysters and their cementation has beneficial effects to durability of concrete.

Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount ofoil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions： fresh, brackish and saltwater environments （submerged in fresh water, alternation of exposed in air ＆ submerged in sea water and submerged in sea water）. The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.

Probabilistic Lifetime Assessment of Marine Reinforced Concrete with Steel Corrosion and Cover Cracking

In order to study the durability behavior of marine reinforced concrete structure suffering from chloride attack, the structural service life is assumed to be divided into three critical stages, which can be characterized by steel corrosion and cover cracking. For each stage, a calculated model used to predict the lifetime is developed. Based on the definition of durability limit state, a probabilistic lifetime model and its time-dependent reliability analytical method are proposed considering the random natures of influencing factors. Then, the probabilistic lifetime prediction models are applied to a bridge pier located in the Hangzhou Bay with Monte Carlo simulation. It is found that the time to corrosion initiation to follows a lognormal distribution, while that the time from corrosion initiation to cover cracking t~ and the time for crack to develop from hairline crack to a limit crack width t2 can be described by Weibull distributions. With the permitted failure probability of 5.0%, it is also observed that the structural durability lifetime mainly depends on the durability life to and that the percentage of participation of the life to to the total service life grows from 61.5% to 83.6% when the cover thickness increases from 40 mm to 80 mm. Therefore, for any part of the marine RC bridge, the lifetime predictions and maintenance efforts should also be directed toward controlling the stage of corrosion initiation induced by chloride ion.

Influence of Binder Composition and Concrete Pore Structure on Chloride Diffusion Coefficient in Concrete

The influence of binder composition and pore structure of concrete on chloride diffusion coefficient in concrete were investigated by the natural immersion test, MIP test, SEM and EDS test, respectively. The experimental results showed that the effect of binder composition on chloride diffusion coefficient was the comprehensive result of concrete pore structure and binder hydration products, and the porosity and pore size distribution were the main factors that influence the changes of diffusion coefficient. The chloride diffusion coefficient decreased with increasing the curing temperature and the relative humidity. The hydration degree were promoted by improving curing temperatures, and then the porosity of concrete decreased and the proportion of gel pore and transitional pore increased, respectively. But the water evaporation decreased with increasing the relative humidity and then decreased porosity and increased the proportion of gel pore and transitional pore. Additionally, The chloride diffusion coefficient of concrete got the lower value when the appropriate replacement of fly ash in the ranges of 10%-20%, when the double-adding fly ash and slag content was 50%. The porosity increased and the ratio of C/S in C-S-H decreased with further increasing the fly ash content, which led to increase the chloride diffusion coefficient in concrete.

Design and Pilot Programs of Marine Exposure Station of A Sea-crossing Bridge

This paper presents the Location,the structural design as well as the anti-corrosion and the pilot programs of the marine exposure station of Zhoushan Archipelago seas sea-crossing bridges. Subjected to the marine environment,the concrete structures in serve with different mixing proportions,cover thickness,additional anti-corrosion measures such as rust-preventing agent,coating,penetration crystalline waterproof material,silicone and permeable fabric were studied. Those results obtained provide important information for the maintenance of marine concrete and the structural design of sea-crossing bridges in the above sea area.