Study on north boundary of subtropical zone in Funiu Mountain according to soil geochemistry

The boundary between subtropical zone and temperate zone is not only important in physical geography, but also attractive in agricultural production. Seven soil profiles studied in this paper are placed along the southern slope of Funiu Mountain at different heights above sea level. Many compositions and properties of these soils have been determined in laboratory. In this paper, the laws of migration and accumulation of soil materials on the southern slope of Funiu Mountain are discussed first, then the division of the boundary between subtropical zone and temperate zone in this area according to soil geochemistry is discussed with qualitative methods and mathematical classification method in which twelve selected indexes such as K m , Saf, Ba, β, Feo/Fet, Mno/Mnt and so on are used. The result indicates that the boundary between subtropical zone and temperate zone on the southern slope of Funiu Mountain is about 950 m above sea level.

Bionic design and performance test of maize grain cleaning screen through earthworm motion characteristics

The maize mixture feeding with a large mass cannot be migrated backward rapidly along the planar reciprocating vibrating screen,and it is easy to accumulate in the front of the screen,which leads to the decrease of screening efficiency.Based on the reverse engineering technology,using the wavy geometry formed during the earthworm(Pheretima guillelmi)moving as a bionic prototype,a bionic screen was designed to make the maize mixture migrate backward rapidly in the front of the screen.The contour curve of earthworm’s head in an axial contracted state was extracted and fitted to obtain its equation.Based on the difference of concave position of the lower surface’s wavy geometry during the earthworm moving,the motion of the bionic screen was divided into four postures,and the conversion between different postures of the bionic screen was realized by the cam drive mechanism.The kinematics simulation of the bionic screen was carried out through ADAMS,and the displacement and velocity of the bionic screen were analyzed.When the feeding mass of the maize mixture was set at 5 kg/s,6 kg/s and 7 kg/s,the test results showed that the time of the maize mixture migrated(TOMMM)in the front of the bionic screen was shortened by 0.18 s,0.71 s,and 1.36 s,respectively,compared with that of planar reciprocating vibrating screen.The total screening time(TST)of the bionic screen was shortened by 1.28 s,1.33 s,and 1.53 s,respectively.The ability of the maize mixture to be migrated backward was improved.This study can provide a reference for the innovative design of the cleaning screen.

Maintaining nano-lamellar microstructure in friction stir welding (FSW) of accumulative roll bonded (ARB) Cu-Nb nano-lamellar composites (NLC)

Accumulative roll bonded （ARB） Copper Niobium （Cu-Nb） nano-lamellar composite （NLC） panels were friction stir welded （FSWed） to evaluate the ability to join panels while retaining the nano-lamellar structure. During a single pass of the friction stir welding （FSW） process, the nano-lamellar structure of the parent material （PM） was retained but was observed to fragment into equiaxed grains during the second pass. FSW has been modeled as a severe deformation process in which the material is subjected to an instantaneous high shear strain rate followed by extreme shear strains. The loss of the nano-lamellar layers was attributed to the increased strain and longer time at temperature resulting from the second pass of the FSW process. Kinematic modeling was used to predict the global average shear strain and shear strain rates experienced by the ARB material during the FSW process. The results of this study indicate that through careful selection of FSW parameters, the nano-lamellar structure and its associated higher strength can be maintained using FSW to join ARB NLC panels.