根据Modelsim与Matlab/Simulink软件各自的特点,对两者的联合仿真技术进行了研究。应用Simulink仿真库里提供的link for modelsim功能解决了联合仿真的接口与实现问题,并把该技术应用于IEEE1588时钟同步仿真中硬件时间戳的获取,取得了...根据Modelsim与Matlab/Simulink软件各自的特点,对两者的联合仿真技术进行了研究。应用Simulink仿真库里提供的link for modelsim功能解决了联合仿真的接口与实现问题,并把该技术应用于IEEE1588时钟同步仿真中硬件时间戳的获取,取得了良好的效果。展开更多
The spin-transfer-torque(STT)magnetic tunneling junction(MTJ)device is one of the prominent candidates for spintronic logic circuit and neuromorphic computing.Therefore,building a simulation framework of hybrid STT-MT...The spin-transfer-torque(STT)magnetic tunneling junction(MTJ)device is one of the prominent candidates for spintronic logic circuit and neuromorphic computing.Therefore,building a simulation framework of hybrid STT-MTJ/CMOS(complementary metal-oxide-semiconductor)circuits is of great value for designing a new kind of computing paradigm based on the spintronic devices.In this work,we develop a simulation framework of hybrid STT-MTJ/CMOS circuits based on MATLAB/Simulink,which is mainly composed of a physics-based STT-MTJ model,a controlled resistor,and a current sensor.In the proposed framework,the STT-MTJ model,based on the Landau-Lifshitz-Gilbert-Slonczewsk(LLGS)equation,is implemented using the MATLAB script.The proposed simulation framework is modularized design,with the advantage of simple-to-use and easy-to-expand.To prove the effectiveness of the proposed framework,the STT-MTJ model is benchmarked with experimental results.Furthermore,the pre-charge sense amplifier(PCSA)circuit consisting of two STT-MTJ devices is validated and the electrical coupling of two spin-torque oscillators is simulated.The results demonstrate the effectiveness of our simulation framework.展开更多
Screening is an important process in mineral industry. In this paper, a study has been made to simulate the screening process based on a high-performance MATLAB/Simulink software, with an example of simulating the sie...Screening is an important process in mineral industry. In this paper, a study has been made to simulate the screening process based on a high-performance MATLAB/Simulink software, with an example of simulating the sieving process of a vibrating screen. A simulation model of the sieving process with a vibrating screen （SMSPVS） was proposed, using correlative mathematical models and Simulink blocks. The results show that the simulation data was very close to the actual data, The minimum errors of size distribution of oversize and undersize are 0.65% and 0.20%, resoectivelv. The sieving orocess can be accurately simulated by the SMSPVS.展开更多
To observe the inner operating process of distance protection,a Matlab/Simulink based dynamic simulation system for microprocessor-based distance protection is designed in this paper.As a modularized design,the simula...To observe the inner operating process of distance protection,a Matlab/Simulink based dynamic simulation system for microprocessor-based distance protection is designed in this paper.As a modularized design,the simulation system is composed of several modules such as fault transient calculation,startup,Fourier algorithm,phase selection,impedance computing and impedance comparison etc.Some typical simulation cases,which focus on the main factors affecting distance relay's operation,have been simulated with the system.Simulation results show that the system is able to demonstrate the dynamic behaviors of distance protection under different operating conditions.展开更多
Based on the basic principle of Time-Of-Flight cameras,a novel MATLAB/SIMULINK model is proposed to measure phase delay of a modulated light signal which represents the distance from camera to object. Subsequently,by ...Based on the basic principle of Time-Of-Flight cameras,a novel MATLAB/SIMULINK model is proposed to measure phase delay of a modulated light signal which represents the distance from camera to object. Subsequently,by discussing influence factors of phase measurement,it is found that the integration time,the sampling time,and the aliasing effect have important effect on improving the accuracy of phase measurement. Interestingly,by analyzing different integration time and sampling time, it is found that the best integration time and sampling time are 0.05 ms and 10 ns,respectively. In this case(i.e.,in absence of the aliasing effect),the variation range of the distance error is between 1 mm and 11 mm in the interval of one period. Especially,under the consideration of the aliasing effect,the average value of distance error is half of that in absence of the aliasing effect. This improves the accuracy of the distance measurement greatly.展开更多
High speed and ultra-high capacity optical communications have emerged as the essential techniques for backbone global information transmission networks. As the bit rate of the transmission system gets higher and high...High speed and ultra-high capacity optical communications have emerged as the essential techniques for backbone global information transmission networks. As the bit rate of the transmission system gets higher and higher 40 Gb/s to 100 Gb/s the modeling of proposed modulation techniques is very important so as to avoid costly practical demonstration. The search for a universal modeling platform for such systems is urgent. Matlab Simulink has become the universal mathematical and modeling tools in most universities and re-search laboratories around the world. This paper thus describes the modeling techniques for advanced photonic transmission systems and Simulink is proven to be very effective platform for development of photonic communications systems due its comprehensive blocksets. The simulation is based mainly on the physical phenomena and understanding of its concepts of communications and photonics. Simulink models are given as examples of various sub-systems of the photonic transmission systems. Some simulated trans-mission performances are demonstrated as examples of final results obtained from Simulink models of the transmission systems.展开更多
A centrifugal pump used as a hydraulic turbine in producing power for a microhydropower system is multifaceted. Centrifugal pumps are far more ubiquitous than turbines in the turbomachinery market, therefore being mor...A centrifugal pump used as a hydraulic turbine in producing power for a microhydropower system is multifaceted. Centrifugal pumps are far more ubiquitous than turbines in the turbomachinery market, therefore being more readily available to the consumer. Additionally, they are cheaper. Hydraulic turbines undergo rigorous CFD simulation design and testing to establish their blade geometries and ranges of operation. This results in a refined but very expensive final product. Centrifugal pumps are thus presented as a logical alternative seeing that they can physically perform the same task as a hydropower turbine albeit at a reduced efficiency. This paper presents the results of an analysis and simulation to assess the use of a centrifugal pump as a hydraulic turbine.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.62004223)the Science and Technology Innovation Program of Hunan Province,China(Grant No.2022RC1094)+1 种基金the Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics,China(Grant No.KF202012)the Hunan Provincial Science Innovation Project for Postgraduate,China(Grant No.CX20210086).
文摘The spin-transfer-torque(STT)magnetic tunneling junction(MTJ)device is one of the prominent candidates for spintronic logic circuit and neuromorphic computing.Therefore,building a simulation framework of hybrid STT-MTJ/CMOS(complementary metal-oxide-semiconductor)circuits is of great value for designing a new kind of computing paradigm based on the spintronic devices.In this work,we develop a simulation framework of hybrid STT-MTJ/CMOS circuits based on MATLAB/Simulink,which is mainly composed of a physics-based STT-MTJ model,a controlled resistor,and a current sensor.In the proposed framework,the STT-MTJ model,based on the Landau-Lifshitz-Gilbert-Slonczewsk(LLGS)equation,is implemented using the MATLAB script.The proposed simulation framework is modularized design,with the advantage of simple-to-use and easy-to-expand.To prove the effectiveness of the proposed framework,the STT-MTJ model is benchmarked with experimental results.Furthermore,the pre-charge sense amplifier(PCSA)circuit consisting of two STT-MTJ devices is validated and the electrical coupling of two spin-torque oscillators is simulated.The results demonstrate the effectiveness of our simulation framework.
文摘Screening is an important process in mineral industry. In this paper, a study has been made to simulate the screening process based on a high-performance MATLAB/Simulink software, with an example of simulating the sieving process of a vibrating screen. A simulation model of the sieving process with a vibrating screen （SMSPVS） was proposed, using correlative mathematical models and Simulink blocks. The results show that the simulation data was very close to the actual data, The minimum errors of size distribution of oversize and undersize are 0.65% and 0.20%, resoectivelv. The sieving orocess can be accurately simulated by the SMSPVS.
基金National Natural Science Foundation of China(No.50777040)
文摘To observe the inner operating process of distance protection,a Matlab/Simulink based dynamic simulation system for microprocessor-based distance protection is designed in this paper.As a modularized design,the simulation system is composed of several modules such as fault transient calculation,startup,Fourier algorithm,phase selection,impedance computing and impedance comparison etc.Some typical simulation cases,which focus on the main factors affecting distance relay's operation,have been simulated with the system.Simulation results show that the system is able to demonstrate the dynamic behaviors of distance protection under different operating conditions.
基金National Natural Science Foundation of China(6127404361233010)Hunan Provincial Natural Science Fund for Distinguished Young Scholars(2015JJ1014)
文摘Based on the basic principle of Time-Of-Flight cameras,a novel MATLAB/SIMULINK model is proposed to measure phase delay of a modulated light signal which represents the distance from camera to object. Subsequently,by discussing influence factors of phase measurement,it is found that the integration time,the sampling time,and the aliasing effect have important effect on improving the accuracy of phase measurement. Interestingly,by analyzing different integration time and sampling time, it is found that the best integration time and sampling time are 0.05 ms and 10 ns,respectively. In this case(i.e.,in absence of the aliasing effect),the variation range of the distance error is between 1 mm and 11 mm in the interval of one period. Especially,under the consideration of the aliasing effect,the average value of distance error is half of that in absence of the aliasing effect. This improves the accuracy of the distance measurement greatly.
文摘High speed and ultra-high capacity optical communications have emerged as the essential techniques for backbone global information transmission networks. As the bit rate of the transmission system gets higher and higher 40 Gb/s to 100 Gb/s the modeling of proposed modulation techniques is very important so as to avoid costly practical demonstration. The search for a universal modeling platform for such systems is urgent. Matlab Simulink has become the universal mathematical and modeling tools in most universities and re-search laboratories around the world. This paper thus describes the modeling techniques for advanced photonic transmission systems and Simulink is proven to be very effective platform for development of photonic communications systems due its comprehensive blocksets. The simulation is based mainly on the physical phenomena and understanding of its concepts of communications and photonics. Simulink models are given as examples of various sub-systems of the photonic transmission systems. Some simulated trans-mission performances are demonstrated as examples of final results obtained from Simulink models of the transmission systems.
文摘A centrifugal pump used as a hydraulic turbine in producing power for a microhydropower system is multifaceted. Centrifugal pumps are far more ubiquitous than turbines in the turbomachinery market, therefore being more readily available to the consumer. Additionally, they are cheaper. Hydraulic turbines undergo rigorous CFD simulation design and testing to establish their blade geometries and ranges of operation. This results in a refined but very expensive final product. Centrifugal pumps are thus presented as a logical alternative seeing that they can physically perform the same task as a hydropower turbine albeit at a reduced efficiency. This paper presents the results of an analysis and simulation to assess the use of a centrifugal pump as a hydraulic turbine.
