The effects of SiC particles(SiCp)on high temperature oxidation behavior of titanium matrix composites(TMCs)under different powder metallurgy processes were investigated.In situ Ti C+Ti_(5)Si_(3)reinforced titanium ma...The effects of SiC particles(SiCp)on high temperature oxidation behavior of titanium matrix composites(TMCs)under different powder metallurgy processes were investigated.In situ Ti C+Ti_(5)Si_(3)reinforced titanium matrix composites were prepared by discharge plasma sintering(SPS)and argon protective sintering(APS).The results show that the two processes have a negligible effect on the composition and hardness of the samples,but the hardness of the two samples is significantly improved by adding SiCp.The apparent porosity of SPS process is obviously smaller than that of APS process,whereas,the apparent porosity increases slightly with the addition of SiCp.The oxide layer thickness and mass gain of the samples obtained by SPS process are smaller than those obtained by APS process.The oxide thickness and mass gain of both processes are further reduced by adding SiCp.The SPS composites showed the best high temperature oxidation resistance.Therefore,TMCs with Si Cp by SPS can effectively improve the high-temperature oxidation behavior of the materials.展开更多
Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human...Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor tissueregeneration.Thus,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HBMSCs)to proliferate and differentiate along the osteogenic lineage.In this study,we engineered a novel material ink(LAB)by blending human bone-ECM(B)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based deposition.The inclusion of the nanofiller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HBMSCs viability upon printing.The composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)model.The inclusion of bone morphogenetic protein-2(BMP-2)with the HBMSCs further enhanced vascularization and mineralization after only seven days.This study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.展开更多
MicroRNA(miR)-200b-3p has been associated with many tumors,but its involvement in pituitary adenoma is unclear.This study investigated the molecular mechanism underlying miR-200b-3p regulation in pituitary adenomas to...MicroRNA(miR)-200b-3p has been associated with many tumors,but its involvement in pituitary adenoma is unclear.This study investigated the molecular mechanism underlying miR-200b-3p regulation in pituitary adenomas to provide a theoretical basis for treatment.Bioinformatics was used to analyze pituitary adenoma-related genes and screen new targets related to RECK and miRNA.As well,the relationship between miR-200b-3p and RECK protein was verified using a double-luciferase reporter gene assay.The expression of miR-200b-3p in clinical samples was analyzed by in situ hybridization.Transfection of the miR-200b-3p inhibitor and small interfering-RECK(si-RECK)was verified by qPCR.GH3 cell viability and proliferation were detected using CCK8 and EdU assays.Apoptosis was detected by flow cytometry and western blotting.Wound healing and Transwell assays were used to detect cell migration and invasion.The effects of miR-200b-3p and RECK on GH3 cells were verified using salvage experiments.miR-200b-3p was highly expressed in pituitary tumor tissue.Inhibitors of miR-200b-3p inhibited cell proliferation promoted cell apoptosis,inhibited invasion and migration,and inhibited the expression of matrix metalloproteinases.Interestingly,miR-200b-3p negatively regulated RECK.The expression of RECK in pituitary adenoma tissues was lower than that in neighboring tissues.Si-RECK rescued the function of miR-200b-3p inhibitors in the above cellular behaviors,and miR-200b-3p accelerated the development of pituitary adenoma by negatively regulating RECK expression.In summary,this study investigated the molecular mechanism by which miR-200b-3p regulates the progression of pituitary adenoma through the negative regulation of RECK.The findings provide a new target for the treatment of pituitary adenoma.展开更多
基金Funded by the Key Projects of Equipment Pre-research Foundation of the Ministry of Equipment Development of the Central Military Commission of China(No.6140922010201)the Key R&D Plan of Zhenjiang in 2018(No.GY2018021)。
文摘The effects of SiC particles(SiCp)on high temperature oxidation behavior of titanium matrix composites(TMCs)under different powder metallurgy processes were investigated.In situ Ti C+Ti_(5)Si_(3)reinforced titanium matrix composites were prepared by discharge plasma sintering(SPS)and argon protective sintering(APS).The results show that the two processes have a negligible effect on the composition and hardness of the samples,but the hardness of the two samples is significantly improved by adding SiCp.The apparent porosity of SPS process is obviously smaller than that of APS process,whereas,the apparent porosity increases slightly with the addition of SiCp.The oxide layer thickness and mass gain of the samples obtained by SPS process are smaller than those obtained by APS process.The oxide thickness and mass gain of both processes are further reduced by adding SiCp.The SPS composites showed the best high temperature oxidation resistance.Therefore,TMCs with Si Cp by SPS can effectively improve the high-temperature oxidation behavior of the materials.
基金supported by grants from the Biotechnology and Biological Sciences Research Council(Nos.BBSRC LO21071/and BB/L00609X/1)UK Regenerative Medicine Platform Hub Acellular Approaches for Therapeutic Delivery(No.MR/K026682/1)+3 种基金Acellular Hub,SMART Materials 3D Architecture(No.MR/R015651/1)the UK Regenerative Medicine Platform(No.MR/L012626/1 Southampton Imaging)to ROCOMRCAMED Regenerative Medicine and Stem Cell Research Initiative(No.MR/V00543X/1)to JID,ROCO and YHKGC acknowledges funding from AIRC Aldi Fellowship under grant agreement No.25412.
文摘Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor tissueregeneration.Thus,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HBMSCs)to proliferate and differentiate along the osteogenic lineage.In this study,we engineered a novel material ink(LAB)by blending human bone-ECM(B)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based deposition.The inclusion of the nanofiller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HBMSCs viability upon printing.The composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)model.The inclusion of bone morphogenetic protein-2(BMP-2)with the HBMSCs further enhanced vascularization and mineralization after only seven days.This study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.
基金supported by Correlation between RECK and GH-type pituitary adenomas(No.21JR11RE027).
文摘MicroRNA(miR)-200b-3p has been associated with many tumors,but its involvement in pituitary adenoma is unclear.This study investigated the molecular mechanism underlying miR-200b-3p regulation in pituitary adenomas to provide a theoretical basis for treatment.Bioinformatics was used to analyze pituitary adenoma-related genes and screen new targets related to RECK and miRNA.As well,the relationship between miR-200b-3p and RECK protein was verified using a double-luciferase reporter gene assay.The expression of miR-200b-3p in clinical samples was analyzed by in situ hybridization.Transfection of the miR-200b-3p inhibitor and small interfering-RECK(si-RECK)was verified by qPCR.GH3 cell viability and proliferation were detected using CCK8 and EdU assays.Apoptosis was detected by flow cytometry and western blotting.Wound healing and Transwell assays were used to detect cell migration and invasion.The effects of miR-200b-3p and RECK on GH3 cells were verified using salvage experiments.miR-200b-3p was highly expressed in pituitary tumor tissue.Inhibitors of miR-200b-3p inhibited cell proliferation promoted cell apoptosis,inhibited invasion and migration,and inhibited the expression of matrix metalloproteinases.Interestingly,miR-200b-3p negatively regulated RECK.The expression of RECK in pituitary adenoma tissues was lower than that in neighboring tissues.Si-RECK rescued the function of miR-200b-3p inhibitors in the above cellular behaviors,and miR-200b-3p accelerated the development of pituitary adenoma by negatively regulating RECK expression.In summary,this study investigated the molecular mechanism by which miR-200b-3p regulates the progression of pituitary adenoma through the negative regulation of RECK.The findings provide a new target for the treatment of pituitary adenoma.
