A generalized nonlinear three-dimensional Hoek‒Brown failure criterion

To understand the strengths of rocks under complex stress states,a generalized nonlinear threedimensional(3D)Hoek‒Brown failure(NGHB)criterion was proposed in this study.This criterion shares the same parameters with the generalized HB(GHB)criterion and inherits the parameter advantages of GHB.Two new parameters,b,and n,were introduced into the NGHB criterion that primarily controls the deviatoric plane shape of the NGHB criterion under triaxial tension and compression,respectively.The NGHB criterion can consider the influence of intermediate principal stress(IPS),where the deviatoric plane shape satisfies the smoothness requirements,while the HB criterion not.This criterion can degenerate into the two modified 3D HB criteria,the Priest criterion under triaxial compression condition and the HB criterion under triaxial compression and tension condition.This criterion was verified using true triaxial test data for different parameters,six types of rocks,and two kinds of in situ rock masses.For comparison,three existing 3D HB criteria were selected for performance comparison research.The result showed that the NGHB criterion gave better prediction performance than other criteria.The prediction errors of the strength of six types of rocks and two kinds of in situ rock masses were in the range of 2.0724%-3.5091%and 1.0144%-3.2321%,respectively.The proposed criterion lays a preliminary theoretical foundation for prediction of engineering rock mass strength under complex in situ stress conditions.

Estimating shear strength of high-level pillars supported with cemented backfilling using the HoekeBrown strength criterion

Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.

Rockburst criterion and evaluation method for potential rockburst pit depth considering excavation damage effect

Excavation-induced disturbances in deep tunnels will lead to deterioration of rock properties and formation of excavation damaged zone(EDZ).This excavation damage effect may affect the potential rockburst pit depth.Taking two diversion tunnels of Jinping II hydropower station for example,the relationship between rockburst pit depth and excavation damage effect is first surveyed.The results indicate that the rockburst pit depth in tunnels with severe damage to rock masses is relatively large.Subsequently,the excavation-induced damage effect is characterized by disturbance factor D based on the Hoek-Brown criterion and wave velocity method.It is found that the EDZ could be further divided into a high-damage zone(HDZ)with D=1 and weak-damage zone(WDZ),and D decays from one to zero linearly.For this,a quantitative evaluation method for potential rockburst pit depth is established by presenting a three-element rockburst criterion considering rock strength,geostress and disturbance factor.The evaluation results obtained by this method match well with actual observations.In addition,the weakening of rock mass strength promotes the formation and expansion of potential rockburst pits.The potential rockburst pit depth is positively correlated with HDZ and WDZ depths,and the HDZ depth has a significant contribution to the potential rockburst pit depth.

Nonlinear empirical failure criterion for rocks under triaxial compression

Based on existing triaxial compression experimental data,a new empirical failure criterion with wide applicability was proposed considering hydrostatic pressure,second stress invariance,and maximum shear stress.Four fitting evaluation indicators were used to verify the consistency of the new failure criterion,and the differences with the other 6 failure criteria were discussed.The characteristics of the new failure criteria in the principal stress space were finally analyzed.The results indicate that(1)the new failure criterion exhibits strong predictive ability for triaxial experiments and has good applicability for both intact and jointed rocks;(2)the influence of hydrostatic pressure on the failure surface exhibits a non-linear trend,and different hydrostatic pressure also exhibits different distribution patterns on the deviatoric stress plane,with a distribution characteristic pattern of hexagonal snowflake-regular hexagon.The maximum shear stress has a torsional effect on the new criterion,in the three-dimensional failure surface.The parameters a and b of the rock have an impact on the failure surface morphology of the new criterion function on the offset surface.

Enhanced Hoek-Brown(H-B)criterion for rocks exposed to chemical corrosion

Underground constructions often encounter water environments,where water–rock interaction can increase porosity,thereby weakening engineering rocks.Correspondingly,the failure criterion for chemically corroded rocks becomes essential in the stability analysis and design of such structures.This study enhances the applicability of the Hoek-Brown(H-B)criterion for engineering structures operating in chemically corrosive conditions by introducing a kinetic porosity-dependent instantaneous mi(KPIM).A multiscale experimental investigation,including nuclear magnetic resonance(NMR),X-ray diffraction(XRD),scanning electron microscopy(SEM),pH and ion chromatography analysis,and triaxial compression tests,is employed to quantify pore structural changes and their linkage with the strength responses of limestone under coupled chemical-mechanical(C-M)conditions.By employing ion chromatography and NMR analysis,along with incorporating the principles of free-face dissolution theory accounting for both congruent and incongruent dissolution,a kinetic chemical corrosion model is developed.This model aims to calculate the kinetic porosity alterations within rocks exposed to varying H+concentrations and durations.Subsequently,utilizing the generalized mixture rule(GMR),the kinetic porositydependent mi is formulated.Evaluation of the KPIM-enhanced H-B criterion using compression test data from 5 types of rocks demonstrated a high level of consistency between the criterion and the experimental results,with a coefficient of determination greater than 0.96,a mean absolute percentage error less than 4.84%,and a root-mean-square deviation less than 5.95 MPa.Finally,the physical significance of the porosity-dependent instantaneous mi is clarified:it serves as an indicator of a rock’s capacity to leverage the confining pressure effect.

Strength criterion for crystalline rocks considering grain size effect and tensile-compressive strength ratio

The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.

Maximum Correntropy Criterion-Based UKF for Loosely Coupling INS and UWB in Indoor Localization

Indoor positioning is a key technology in today’s intelligent environments,and it plays a crucial role in many application areas.This paper proposed an unscented Kalman filter(UKF)based on the maximum correntropy criterion(MCC)instead of the minimummean square error criterion(MMSE).This innovative approach is applied to the loose coupling of the Inertial Navigation System(INS)and Ultra-Wideband(UWB).By introducing the maximum correntropy criterion,the MCCUKF algorithm dynamically adjusts the covariance matrices of the system noise and the measurement noise,thus enhancing its adaptability to diverse environmental localization requirements.Particularly in the presence of non-Gaussian noise,especially heavy-tailed noise,the MCCUKF exhibits superior accuracy and robustness compared to the traditional UKF.The method initially generates an estimate of the predicted state and covariance matrix through the unscented transform(UT)and then recharacterizes the measurement information using a nonlinear regression method at the cost of theMCC.Subsequently,the state and covariance matrices of the filter are updated by employing the unscented transformation on the measurement equations.Moreover,to mitigate the influence of non-line-of-sight(NLOS)errors positioning accuracy,this paper proposes a k-medoid clustering algorithm based on bisection k-means(Bikmeans).This algorithm preprocesses the UWB distance measurements to yield a more precise position estimation.Simulation results demonstrate that MCCUKF is robust to the uncertainty of UWB and realizes stable integration of INS and UWB systems.

Three-dimensional limit variation analysis on the ultimate pullout capacity of the anchor cables based on the Hoek-Brown failure criterion

Only simplified two-dimensional model and a single failure mode are adopted to calculate the ultimate pullout capacity(UPC)of anchor cables in most previous research.This study focuses on a more comprehensive combination failure mode that consists of bond failure of an anchorage body and failure of an anchored rock mass.The three-dimensional ultimate pullout capacity of the anchor cables is calculated based on the Hoek-Brown failure criterion and variation analysis method.The numerical solution for the curvilinear function in fracture plane is obtained based on the finite difference theory,which more accurately reflects the failure state of the anchor cable,as opposed to that being assumed in advance.The results reveal that relying solely on a single failure mode for UPC calculations has limitations,as changes in parameter values not only directly impact the UPC value but also can alter the failure model and thus the calculation method.

砂化白云岩Hoek-Brown准则参数取值方法研究及其岩体力学参数估算

武汉市碳酸盐岩天兴洲条带,发育一套巨厚层砂化白云岩,其岩体力学参数取值,目前尚无相关经验或建议。基于Hoek-Brown(简称H-B)准则及其Mohr-Coulomb(简称M-C)线性转换理论,归纳总结前人研究成果,在试验数据的基础上,研究了砂化白云岩的H-B准则参数,提出一种基于静止侧压力系数k_(1)的最大围压上限σ_(3max)简化取值方法,估算其岩体力学参数并给出了取值建议。结果表明:基于k_(1)的σ_(3m)_(ax)简化取值方法,合理缩减了围压σ_(3)的取值区间,提高了计算精度;砂化白云岩的地质强度指数GSI与无侧限抗压强度σ_(ci)呈良好的线性关系,结合其砂化程度在岩体块度上的贴切表现,制作了针对砂化白云岩的改进GSI建议值表;岩体材料参数m_(i)的大小主要受控于岩石种类及细观颗粒的粗糙程度,其取值区间跨度小且对岩体力学参数影响较小,取用m_(i)=9;通过H-B准则与M-C准则的线性转换,建立了σ_(ci)与岩体抗剪强度之间的计算关系;各试验值、拟合值及理论计算值之间关系自洽、结果合理,有效解决了极破碎白云岩岩体力学参数的取值问题。上述基础性工作对H-B准则的应用起到了有益的补充,对武汉市类似岩层的岩体力学参数取值方法研究及运用具有重要借鉴意义。

AIGC独创性标准的构建

随着生成式人工智能技术的普及,AIGC著作权的问题凸显。传统“工具论”和“贡献论”下的独创性标准适用于AIGC时尤显不足,必须构建更具可操作性的独创性标准。通过对著作权法的立法价值进行分析和对现行法律的规范进行研究,结合国内外司法案例的实证研究,提出“决定论”下独创性标准的构建。应当立足人类中心主义,坚持著作权主体的唯一性,将劳动投入作为权利基础,并引入英美法系因果关系理论,将人类对作品的呈现结果决定和创作过程控制作为充分必要条件。由此,“决定论”在对象、标准、法律、事实、因果关系上是自洽的,并能指导实践。

钢模块单元承插式柱-柱节点弯剪承载力研究

提出一种新型承插式柱-柱节点,采用内外套筒作为上下钢管柱的拼接构件,仅通过高强对穿螺栓拼装,可以满足建筑结构装配化的需求.针对其在弯剪作用下的承载性能,设计并制作了三个足尺试件进行静力加载试验,获得了节点的受力特征、破坏模式、极限承载力和应变分布等.建立数值模型,在验证数值模型正确性的基础上,对节点进行参数化分析,探讨了套筒灌浆、内套筒厚度、节点长度对节点极限承载力的影响.试验和数值模拟研究结果表明:内套筒近端板处至第一根竖向螺栓前是节点域传力的关键部位;套筒灌浆和减小节点长度能够延缓节点核心区应变发展,但影响程度有限;当保证节点长度和内外套筒相对抗弯刚度比一定时,套筒灌浆可使连接受力性能更优,极限承载力提高19.3%;控制其他参数相同,节点长度越大,“杠杆效应”越强,抗弯承载力也随之提高,节点长度由300 mm增加至600 mm,极限承载力提高15.1%;内套筒厚度越大,截面承载力的安全储备越高,内套筒厚度由8 mm增加至12 mm,极限承载力提高31.4%.基于“有限塑性发展强度准则”和“杠杆效应”理论提出了节点的抗弯承载力计算公式,通过和数值计算结果的对比,验证了计算式的准确性.

Fisher准则函数在机械刀具切削磨损检测中的应用

在高精度机床道具切削磨损无接触图像检测中,磨损区域边缘特征容易发生混淆,区分其像素边缘区域成为一个难点。Fisher判别函数可以用于特征提取,即通过选择最具有区分力的特征来改善分类性能。针对这一特点,提出基于Fisher准则函数的机械刀具切削磨损检测方法。首先,对采集到的机械刀具切削磨损图像实施图像增强处理,利用实施修正线性拉伸操作解决光照不均匀问题,凸出刀具磨损区域的细节特征并提高图像质量;其次,利用基于Fisher准则函数的图像阈值分割方法,将刀体区域和其工作背景区域分割出来,使刀具磨损区域更加清晰,提高磨损区域的可识别性;最后,通过Roberts边缘检测确定刀具切削磨损边缘,并使用Zernike正交矩确定刀具切削磨损边缘的精确值以获取磨损区域,提取其磨损信息实现机械刀具切削磨损的检测。实验结果表明:所提方法具有较高图像处理能力以及磨损检测精度。

Formation mechanism and criterion of linear segregation in ZL205A alloy

The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process was investigated. And the heat transfer of the casting during solidification process was analyzed by simulation technique, resulting from the information of linear segregation obtained by plenty of experiments. The new linear segregation criterion was proposed through the simulation and experimental results. It was found that the melting metal with high Cu contents was feeding the crack shrinkage formed by the tearing under the effect of feeding pressure during the later solidification, which led to the formation of linear segregation. The control methods for the linear segregation were suggested based on the proposed mechanism. Finally, the criterion of linear segregation was confirmed by the production of the actual castings.

Max-Min蚁群算法在固定货架拣选路径优化中的应用

固定货架拣选路径优化问题是一个典型的TSP问题 .为NP完全难题 .使用Max MinAntSystemAlgorithm来求解该问题 ,计算机仿真结果表明该方法能较快地找到最优解 ,而且比神经网络。

Evaluation of varying ductile fracture criterion for 7075 aluminum alloy

As one of the principal failures,ductile fracturing restricts metal forming process.Cockcroft-Latham type fracture criterion is suited for ductile fracture in bulk metal-forming simulation.Finding a way to evaluate the ductile fracture criterion（DFC） and identify the relationship between DFC and deformation conditions for a strain-softening material,7075 aluminum alloy;however,it is a non-trivial issue that still needs to be addressed in a greater depth.An innovative approach is brought forth that the compression tests and numerical simulations provide mutual support to evaluate the ductile damage cumulating process and determine the DFC diagram.One of the results shows that for a fixed temperature,the maximum cumulated damage decreases regularly with increasing strain rate.The most important result shows that DFC of 7075 aluminum alloy at temperatures of 573-723 K and strain rates of 0.01-10 s-1 is not a constant but a change in a range of 0.255-0.453,thus it has been defined with varying ductile fracture criterion（VDFC） and characterized by a function of strain rate and temperature.According to VDFC diagram,the exact fracture moment and position during various forming processes will be predicted conveniently,in addition to which,the deformation domains with lower fracture risk corresponding to higher VDFC can be identified.

Flow equation and similarity criterion during centrifugal casting in micro-channel

Liquid metal filling flow process in the microscale during the centrifugal casting process was studied by means of similar physical simulation. The research was focused on derived similarity criterion. Based on the traditional flow equations, the flow equation and the Bernoulli＇s equation for liquid metal flows in micro-scale space were derived, which provides a mathematical model for numerical simulation of micro-scale flow. In the meanwhile, according to the micro-flow equation and the similarity theory, the similarity criterion for the physical simulation of the mold filling behaviors was presented under centrifugal force field, so as to achieve the visual observation and quantitative analysis of micro-flow process.

基于时延Max-Min相似的多路径公平带宽分配

多路径传输可以提高网络性能,同时也使资源分配的公平性问题复杂化,单路径下能够良好工作的诸多机制无法轻易移植到多路径环境中。根据带宽分配和排队分组、排队时延的内在联系,提出了时延相似性的概念。设计了一种端到端分布式带宽分配算法,将流和传输路径两个层面的控制相分离,动态调整流的排队分组在其各传输路径上的分配,达到相似排队时延,进而实现公平带宽分配。在单瓶颈限定下证明了相似排队时延为公平带宽分配的充分条件。最后,通过两组仿真实验验证了算法的有效性。

应用Max-Min策略的物联网社区构建方法

针对如何在面向终端用户的服务网络中实现高效构建代价最小、效用最大的物联网社区的问题,结合物联网的特征,借助TheSet-covering理论,提出了一种基于Max-Min的物联网社区构建方法。对问题进行了相关描述,给出了物联网社区的构建方法。理论分析和仿真实验表明,该社区构建方法与CONGA算法相比,具有代价小、效率高的优点。

基于案例和MAX-MIN云推理的UCAV双层战术决策

针对无人作战飞机空战过程中的战术决策问题,借鉴认知心理学双重加工理论,提出了一种案例推理与MAX-MIN云推理机制相结合的双层战术决策方案。首先,将飞行员作战经验案例化以构建案例库,将问题情境和案例库中的源案例进行相似度匹配以实现第一层基于案例推理的启发式决策,若是低于相似度阈值则转向第二层基于MAX-MIN云推理的分析决策,用前件云发生器对空战特征属性云化以形成属性云滴;然后,结合定性规则,采用MAX-MIN云推理算法得到规则云滴,进而得出战术决策方案。仿真结果表明,提出的双层战术决策可有效实现无人作战飞机空战战术决策,决策时间符合空战实时性要求。

Max-min神经网络的一种有效学习算法

本文在A．Blanco等人[1,2]的算法的基础上，提出了max-min神经网络的一种改进了的反馈学习算法，严格证明了该算法的迭代收效性。理论分析及实例计算结果均表明，本文算法具有算法简单、收敛速度快、榆出误差小等显著特点。