Efficient slope reliability analysis under soil spatial variability using maximum entropy distribution with fractional moments

Spatial variability of soil properties imposes a challenge for practical analysis and design in geotechnical engineering.The latter is particularly true for slope stability assessment,where the effects of uncertainty are synthesized in the so-called probability of failure.This probability quantifies the reliability of a slope and its numerical calculation is usually quite involved from a numerical viewpoint.In view of this issue,this paper proposes an approach for failure probability assessment based on Latinized partially stratified sampling and maximum entropy distribution with fractional moments.The spatial variability of geotechnical properties is represented by means of random fields and the Karhunen-Loève expansion.Then,failure probabilities are estimated employing maximum entropy distribution with fractional moments.The application of the proposed approach is examined with two examples:a case study of an undrained slope and a case study of a slope with cross-correlated random fields of strength parameters under a drained slope.The results show that the proposed approach has excellent accuracy and high efficiency,and it can be applied straightforwardly to similar geotechnical engineering problems.

Research on a deconvolution algorithm for laser-induced fluorescence diagnosis based on the maximum entropy principle

Laser-induced fluorescence(LIF)spectroscopy is employed for plasma diagnosis,necessitating the utilization of deconvolution algorithms to isolate the Doppler effect from the raw spectral signal.However,direct deconvolution becomes invalid in the presence of noise as it leads to infinite amplification of high-frequency noise components.To address this issue,we propose a deconvolution algorithm based on the maximum entropy principle.We validate the effectiveness of the proposed algorithm by utilizing simulated LIF spectra at various noise levels(signal-to-noise ratio,SNR=20–80 d B)and measured LIF spectra with Xe as the working fluid.In the typical measured spectrum(SNR=26.23 d B)experiment,compared with the Gaussian filter and the Richardson–Lucy(R-L)algorithm,the proposed algorithm demonstrates an increase in SNR of 1.39 d B and 4.66 d B,respectively,along with a reduction in the root-meansquare error(RMSE)of 35%and 64%,respectively.Additionally,there is a decrease in the spectral angle(SA)of 0.05 and 0.11,respectively.In the high-quality spectrum(SNR=43.96 d B)experiment,the results show that the running time of the proposed algorithm is reduced by about98%compared with the R-L iterative algorithm.Moreover,the maximum entropy algorithm avoids parameter optimization settings and is more suitable for automatic implementation.In conclusion,the proposed algorithm can accurately resolve Doppler spectrum details while effectively suppressing noise,thus highlighting its advantage in LIF spectral deconvolution applications.

Delineation of Prospecting Prospect Area Based on Maximum Entropy Model

Taking the Dapingzhang copper-polymetallic deposit in Yunnan Province, China as the research object, the maximum entropy model was used to extract the mining information, and the mineral resource prediction model was established by using the exploration data of the deposit and related regions in this area, so as to determine the prospecting prospect area in the study area. In this paper, the Jacknife analysis module of maximum entropy model is used to quantitatively rank the importance of 39 geochemical element variables, and finally obtain the prospecting prospect map of the study area. The research results show that the Dapingzhang mining area has the potential to find hidden ore in the deep and surrounding areas, and the northern and southern ends and western sides of the rock ore control structural belt in the eastern region of the mining area have good prospecting prospects. The research results provide an important basis for the deployment of follow-up exploration work in the study area, and the maximum entropy model has a good application effect in mineral resources exploration.

A New Maximum Entropy Probability Function for the Surface Elevation of Nonlinear Sea Waves

Based on the maximum entropy principle a new probability density function （PDF） f（x） for the surface elevation of nonlinear sea waves, X, is derived through performing a coordinate transform of X and solving a variation problem subject to three constraint conditions of f（ x ）. Compared with the maximum entropy PDFs presented previously, the new PDF has the following merits： （1） it has four parameters to be determined and hence can give more refined fit to observed data and has wider suitability for nonlinear waves in different conditions; （2） these parameters are expressed in terms of distribution moments of X in a relatively simple form and hence are easy to be determined from observed data; （3） the PDF is free of the restriction of weak nonlinearity and possible to be used for sea waves in complicated conditions, such as those in shallow waters with complicated topography; and （4） the PDF is simple in form and hence convenient for theoretical and practical uses. l.aboratory wind-wave experiments have been conducted to test the competence of the new PDF for the surface elevation of nonlinear waves. The experimental results manifest that the new PDF gives somewhat better fit to the laboratory wind-wave data than the well-known Gram-Charlier PDF and beta PDF.

Maximum Entropy Estimation of n-Year Extreme Waveheights

A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheight expected to occur in n years, is presented on the basis of the maximum entropy principle. The main points of the method are as follows: (1) based on the Hamiltonian principle, a maximum entropy probability density function for the extreme waveheight H, f(H)=αHγ e -βH4 is derived from a Lagrangian function subject to some necessary and rational constraints; (2) the parameters α, β, and γ in the function are expressed in terms of the mean , variance V= (H-)2 and bias B= (H-)3 ; and (3) with , V and B estimated from observed data, the n -year return-period wave height H n is computed in accordance with the formula 11-F(H n)=n , where F(H n) is defined as F(H n)=∫ H n 0f(H) d H. Examples of estimating the 50 and 100-year return period waveheights by the present method and by some currently used method from observed data acquired from two hydrographic stations are given. A comparison of the estimated results shows that the present method is superior to the others.

Spatial-temporal Evolution and Determinants of the Belt and Road Initiative: A Maximum Entropy Gravity Model Approach

The spatial interaction model is an effective way to explore the geographical disparities inherent in the Belt and Road Initiative(BRI) by simulating spatial flows. The traditional gravity model implies the hypothesis of equilibrium points without any reference to when or how to achieve it. In this paper, a dynamic gravity model was established based on the Maximum Entropy(MaxEnt) theory to estimate and monitor the interconnection intensity and dynamic characters of bilateral relations. In order to detect the determinants of interconnection intensity, a Geodetector method was applied to identify and evaluate the determinants of spatial networks in five dimensions. The empirical study clearly demonstrates a heterogeneous and non-circular spatial structure. The main driving forces of spatial-temporal evolution are foreign direct investment, tourism and railway infrastructure construction, while determinants in different sub-regions show obvious spatial differentiation. Southeast Asian countries are typically multi-island area where aviation infrastructure plays a more important role. North and Central Asian countries regard oil as a pillar industry where power and port facilities have a greater impact on the interconnection. While Western Asian countries are mostly influenced by the railway infrastructure, Eastern European countries already have relatively robust infrastructure where tariff policies provide a greater impetus.

Maximum Entropy Distribution Function and Uncertainty Evaluation Criteria

Marine environmental design parameter extrapolation has important applications in marine engineering and coastal disaster prevention.The distribution models used for environmental design parameter usually pass the hypothesis tests in statistical analysis,but the calculation results of different distribution models often vary largely.In this paper,based on the information entropy,the overall uncertainty test criteria were studied for commonly used distributions including Gumbel,Weibull,and Pearson-III distribution.An improved method for parameter estimation of the maximum entropy distribution model is proposed on the basis of moment estimation.The study in this paper shows that the number of sample data and the degree of dispersion are proportional to the information entropy,and the overall uncertainty of the maximum entropy distribution model is minimal compared with other models.

Application of Maximum Entropy Principle to Studying the Distribution of Wave Heights in A Random Wave Field

Based on the maximum entropy principle, a probability density function (PDF) is derived for the distribution of wave heights in a random wave field, without any more hypothesis. The present PDF, being a non-Rayleigh form, involves two parameters: the average wave height H— and the state parameter γ. The role of γ in the distribution of wave heights is examined. It is found that γ may be a certain measure of sea state. A least square method for determining γ from measured data is proposed. In virtue of the method, the values of γ are determined for three sea states from the data measured in the East China Sea. The present PDF is compared with the well known Rayleigh PDF of wave height and it is shown that it much better fits the data than the Rayleigh PDF. It is expected that the present PDF would fit some other wave variables, since its derivation is not restricted only to the wave height.

Application of Maximum Entropy Distribution to the Statistical Properties of Wave Groups

The new distributions of the statistics of wave groups based on the maximum entropy principle are presented. The maximum entropy distributions appear to be superior to conventional distributions when applied to a limited amount of information. Its applications to the wave group properties show the effectiveness of the maximum entropy distribution. FFF filtering method is employed to obtain the wave envelope fast and efficiently. Comparisons of both the maximum entropy distribution and the distribution of Longuet-Higgins （1984） with the laboratory wind-wave data show that the former gives a better fit.

Receiver function estimated by maximum entropy deconvolution

Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.

The deconvolution of lunar brightness temperature based on the maximum entropy method using Chang'e-2 microwave data

A passive and multi-channel microwave sounder onboard the Chang＇e-2 orbiter has successfully acquired microwave observations of the lunar surface and subsurface structure. Compared with the Chang＇e-1 orbiter, the Chang＇e-2 orbiter obtained more accurate and comprehensive microwave brightness temperature data, which are helpful for further research. Since there is a close relationship between mi- crowave brightness temperature data and some related properties of the lunar regolith, such as the thickness, temperature and dielectric constant, precise and high resolution brightness temperature data are necessary for such research. However, through the detection mechanism of the microwave sounder, the brightness temperature data ac- quired from the microwave sounder are weighted by the antenna radiation pattern, so the data are the convolution of the antenna radiation pattern with the lunar brightness temperature. In order to obtain the real lunar brightness temperature, a deconvolution method is needed. The aim of this paper is to solve the problem associated with per- forming deconvolution of the lunar brightness temperature. In this study, we introduce the maximum entropy method （MEM） to process the brightness temperature data and achieve excellent results. The paper mainly includes the following aspects： first, we introduce the principle of the MEM; second, through a series of simulations, the MEM has been verified as an efficient deconvolution method; and third, the MEM is used to process the Chang＇e-2 microwave data and the results are significant.

PHASE EXTENSION AND STRUCTURE ANALYSIS BY THE MAXIMUM ENTROPY METHOD

Excellent results are obtained in structure analysis with jew phases of structure factors by the maximum-entropy method (MEM) for CaGaN PbCO3 and ReBe22 single crystals. The computation time and memory space are minimized by symmetry operations so that structure analysis by the MEM can be carried out with a personal computer.

OIL MONITORING DIAGNOSTIC CRITERIONS BASED ON MAXIMUM ENTROPY PRINCIPLE

A method of applying maximum entropy probability density estimation approachto constituting diagnostic criterions of oil monitoring data is presented. The method promotes theprecision of diagnostic criterions for evaluating the wear state of mechanical facilities, andjudging abnormal data. According to the critical boundary points defined, a new measure onmonitoring wear state and identifying probable wear faults can be got. The method can be applied tospectrometric analysis and direct reading ferrographic analysis. On the basis of the analysis anddiscussion of two examples of 8NVD48A-2U diesel engines, the practicality is proved to be aneffective method in oil monitoring.

Scour Development Around Submarine Pipelines due to Current Based on the Maximum Entropy Theory

This paper presents the results from laboratory experiments and theoretical analysis to investigate the development of scour around submarine pipeline under steady current conditions. Experiments show that the scour process takes place in two stages: the initial rapid scour and the subsequent gradual scour development stage. An empirical formula for calculating the equilibrium scour depth(the maximum scour depth) is developed by using the regression method. This formula together with the maximum entropy theory can be applied to establish a formula to predict the scour process for given water depth, diameter of pipeline and flow velocity. Good agreement between the predicted and measured scour depth is obtained.

Prediction of the global potential geographical distribution of Hylurgus ligniperda using a maximum entropy model

Background: Hylurgus ligniperda(Fabricius) is native to Europe but has established populations in many countries and regions. H. ligniperda mainly infests Pinus species, and can cause severe weakness and even death of the host through its boring activity;it can also be a vector of various pathogenic fungi. This study was conducted to investigate the environmental variables limiting the distribution of H. ligniperda and the change trend of its suitable areas under climate change.Results: We used a maximum entropy model to predict the potential geographical distribution of H. ligniperda on a global scale under near current and future climatic scenarios using its occurrence data and environmental variables. The result shows that the areas surrounding the Mediterranean region, the eastern coastal areas of Asia, and the southeastern part of Oceania are highly suitable for H. ligniperda. The environmental variables with the greatest effect on the distribution of H. ligniperda were determined using the jackknife method and Pearson’s correlation analysis and included the monthly average maximum temperature in April, precipitation of driest quarter, the monthly average minimum temperature in December, precipitation of coldest quarter, mean temperature of driest quarter and mean diurnal range.Conclusions: Excessive precipitation in winter and low temperatures in spring had a great effect on the distribution of H. ligniperda. The potential geographical distribution of H. ligniperda was predicted to change under future climatic conditions compared with near current climate conditions. Highly suitable areas, moderately suitable areas and low suitable areas were predicted to increase by 59.99%, 44.43% and 22.92%, respectively, under the2081–2100 ssp245 scenario.

A New Detection Approach Based on the Maximum Entropy Model

The maximum entropy model was introduced and a new intrusion detection approach based on the maximum entropy model was proposed. The vector space model was adopted for data presentation. The minimal entropy partitioning method was utilized for attribute diseretization. Experiments on the KDD CUP 1999 standard data set were designed and the experimental results were shown. The receiver operating eharaeteristie（ROC） curve analysis approach was utilized to analyze the experimental results. The analysis results show that the proposed approach is comparable to those based on support vector maehine（SVM） and outperforms those based on C4.5 and Naive Bayes classifiers. According to the overall evaluation result, the proposed approach is a little better than those based on SVM.

A microscopic ancient river channel identification method based on maximum entropy principle and Wigner-Ville Distribution and its application

In view of the problem of fine characterization of narrow and thin channels,the maximum entropy criterion is used to enhance the focusing characteristics of Wigner-Ville Distribution.On the basis of effectively improving the time-frequency resolution of seismic signal,a new method of microscopic ancient river channel identification is established.Based on the principle of the equivalence between the maximum entropy power spectrum and the AR model power spectrum,the prediction error and the autoregression coefficient of AR model are obtained using the Burg algorithm and Levinson-Durbin recurrence rule.Under the condition of the first derivative of autocorrelation function being 0,the Wigner-Ville Distribution of seismic signal is calculated,and the Wigner-Ville Distribution time-frequency power spectrum(MEWVD)is obtained under the maxi-mum entropy criterion of the microscopic ancient river channel.Through analysis of emulational seismic signal and forward numerical simulation signal of narrow thin model,it is found that MEWVD can effectively avoid the interference of cross term of Wigner-Ville Distribution,and obtain more accurate spectral characteristics than STFT and CWT signal analysis methods.It is also proved that the narrow and thin river channels of different scales can be identified effectively by MEWVD of different frequencies.The method is applied to the third member of Jurassic Shaximiao Formation(J2s33-2)gas reservoir of the Zhongji-ang gas field in Sichuan Basin.The spatial information of width and direction of narrow and thin river channels with width less than 500 m and sandstone thickness less than 35 m is accurately identified,providing bases for well deployment and horizontal well fracturing section selection.

APPLICATION OF MAXIMUM ENTROPY METHOD TO CALCULATE RDF OF Ni-P AMORPHOUS ALLOY FROM X-RAY DIFFRACTION DATA

Experiments clarified that application of the maximum entropy method to calculate the RDF (radial distribution function)of the Ni-P amorphous alloy from fewer data of its X-ray diffraction data shows a higher resolution and good consistent with known results.It is be- lieved that this method is available for the analysis of amorphous structure.

Surface Elevation Distribution of Sea Waves Based on the Maximum Entropy Principle

A probability density function of surface elevation is obtained through improvement of the method introduced by Cieslikiewicz who employed the maximum entropy principle to investigate the surface elevation distribution. The density function can be easily extended to higher order according to demand and is non-negative everywhere, satisfying the basic behavior of the probability, Moreover because the distribution is derived without any assumption about sea waves, it is found from comparison with several accepted distributions that the new form of distribution can be applied in a wider range of wave conditions, In addition, the density function can be used to fit some observed distributions of surface vertical acceleration although something remains unsolved.

MAXIMUM ENTROPY DECONVOLUTION OF XPS PEAK

Necessity of XPS spectrum deconvolution, disadvantages of the traditional Fast Fourier Transform decon-volution method (FFT) , principle, method and advantages of Maximum Entropy Deconvolution Method (MEM) are de-scribed. Criteria for determing the number of data points sam-pled in MEM are the main point disccussed in the paper,some XPS deconvolution applications of our MEM software show that the MEM makes XPS deconvolution much easier than the traditional FFT method.