The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special...The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.展开更多
Unmanned Aerial Vehicle(UAV)tracking has been possible because of the growth of intelligent information technology in smart cities,making it simple to gather data at any time by dynamically monitoring events,people,th...Unmanned Aerial Vehicle(UAV)tracking has been possible because of the growth of intelligent information technology in smart cities,making it simple to gather data at any time by dynamically monitoring events,people,the environment,and other aspects in the city.The traditional filter creates a model to address the boundary effect and time filter degradation issues in UAV tracking operations.But these methods ignore the loss of data integrity terms since they are overly dependent on numerous explicit previous regularization terms.In light of the aforementioned issues,this work suggests a dual-domain Jensen-Shannon divergence correlation filter(DJSCF)model address the probability-based distance measuring issue in the event of filter degradation.The two-domain weighting matrix and JS divergence constraint are combined to lessen the impact of sample imbalance and distortion.Two new tracking models that are based on the perspectives of the actual probability filter distribution and observation probability filter distribution are proposed to translate the statistical distance in the online tracking model into response fitting.The model is roughly transformed into a linear equality constraint issue in the iterative solution,which is then solved by the alternate direction multiplier method(ADMM).The usefulness and superiority of the suggested strategy have been shown by a vast number of experimental findings.展开更多
Attribute reduction,also known as feature selection,for decision information systems is one of the most pivotal issues in machine learning and data mining.Approaches based on the rough set theory and some extensions w...Attribute reduction,also known as feature selection,for decision information systems is one of the most pivotal issues in machine learning and data mining.Approaches based on the rough set theory and some extensions were proved to be efficient for dealing with the problemof attribute reduction.Unfortunately,the intuitionistic fuzzy sets based methods have not received much interest,while these methods are well-known as a very powerful approach to noisy decision tables,i.e.,data tables with the low initial classification accuracy.Therefore,this paper provides a novel incremental attribute reductionmethod to dealmore effectivelywith noisy decision tables,especially for highdimensional ones.In particular,we define a new reduct and then design an original attribute reduction method based on the distance measure between two intuitionistic fuzzy partitions.It should be noted that the intuitionistic fuzzypartitiondistance iswell-knownas aneffectivemeasure todetermine important attributes.More interestingly,an incremental formula is also developed to quickly compute the intuitionistic fuzzy partition distance in case when the decision table increases in the number of objects.This formula is then applied to construct an incremental attribute reduction algorithm for handling such dynamic tables.Besides,some experiments are conducted on real datasets to show that our method is far superior to the fuzzy rough set based methods in terms of the size of reduct and the classification accuracy.展开更多
A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright ...A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright spot is pegged on the object to be measured and imaged to the target of CCD camera through a telescopic lens. The CCD target converts the optical signal to equivalent electric signal. The video frequency signal is digitized to an array of 512×512 pixels by the analog to digital converter (ADC), then transmitted to the computer. The computer controls the data acquisition, conducts image processing and detects the location of the target spot. Comparing the current position with the original position of the spot, the displacement of object is obtained. With the aid of analysis software, the system can achieve the resolution of 0 01 mm in the 6 m distance from the object to the point of observation. To meet the need of practice, the measuring distance can be extended to 100 m or even farther.展开更多
Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is di...Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is difficult to use the traditional probability theory to process the samples and assess the degree of uncertainty. Using the grey relational theory and the norm theory, the grey distance information approach, which is based on the grey distance information quantity of a sample and the average grey distance information quantity of the samples, is proposed in this article. The definitions of the grey distance information quantity of a sample and the average grey distance information quantity of the samples, with their characteristics and algorithms, are introduced. The correlative problems, including the algorithm of estimated value, the standard deviation, and the acceptance and rejection criteria of the samples and estimated results, are also proposed. Moreover, the information whitening ratio is introduced to select the weight algorithm and to compare the different samples. Several examples are given to demonstrate the application of the proposed approach. The examples show that the proposed approach, which has no demand for the probability distribution of small samples, is feasible and effective.展开更多
This paper aims to introduce the novel concept of the bipolar picture fuzzy set(BPFS)as a hybrid structure of bipolar fuzzy set(BFS)and picture fuzzy set(PFS).BPFS is a new kind of fuzzy sets to deal with bipolarity(b...This paper aims to introduce the novel concept of the bipolar picture fuzzy set(BPFS)as a hybrid structure of bipolar fuzzy set(BFS)and picture fuzzy set(PFS).BPFS is a new kind of fuzzy sets to deal with bipolarity(both positive and negative aspects)to each membership degree(belonging-ness),neutral membership(not decided),and non-membership degree(refusal).In this article,some basic properties of bipolar picture fuzzy sets(BPFSs)and their fundamental operations are introduced.The score function,accuracy function and certainty function are suggested to discuss the comparability of bipolar picture fuzzy numbers(BPFNs).Additionally,the concept of new distance measures of BPFSs is presented to discuss geometrical properties of BPFSs.In the context of BPFSs,certain aggregation operators(AOs)named as“bipolar picture fuzzy weighted geometric(BPFWG)operator,bipolar picture fuzzy ordered weighted geometric(BPFOWG)operator and bipolar picture fuzzy hybrid geometric(BPFHG)operator”are defined for information aggregation of BPFNs.Based on the proposed AOs,a new multicriteria decision-making(MCDM)approach is proposed to address uncertain real-life situations.Finally,a practical application of proposed methodology is also illustrated to discuss its feasibility and applicability.展开更多
Distance estimation can be achieved by using active sensors or with the help of passive sensors such as cameras.The stereo vision system is generally composed of two cameras to mimic the human binocular vision.In this...Distance estimation can be achieved by using active sensors or with the help of passive sensors such as cameras.The stereo vision system is generally composed of two cameras to mimic the human binocular vision.In this paper,a Python-based algorithm is pro-posed to find the parameters of each camera,rectify the images,create the disparity maps and finally use these maps for distance measurements.Experiments using real-time im-ages,which were captured from our stereo vision system,of different obstacles posi-tioned at multiple distances(60-200 cm)prove the effectiveness of the proposed program and show that the calculated distance to the obstacle is relatively accurate.The accuracy of distance measurement is up to 99.83%.The processing time needed to calculate the distance between the obstacle and the cameras is less than 0.355 s.展开更多
The measurement accuracy of speed and distance in high speed train directly affects the control precision and driving efficiency of train control system. To improve the capability of train self control, a combined spe...The measurement accuracy of speed and distance in high speed train directly affects the control precision and driving efficiency of train control system. To improve the capability of train self control, a combined speed measurement and positioning method based on speed sensor and radar which is assisted by global positioning system(GPS) is proposed to improve the accuracy of measurement and reduce the dependence on the ground equipment. In consideration of the fact that the filtering precision of Kalman filter will decrease when the statistical characteristics are changing, this paper uses fuzzy comprehensive evaluation method to evaluate the sub filter, and information distribution coefficients are dynamically adjusted according to filtering reliability, which can improve the fusion accuracy and fault tolerance of the system. The sub filter is required to carry on the covariance shaping adaptive filtering when it is in the suboptimal state. The adjustment factor of error covariance is obtained according to the minimized cost function, which can improve the matching degree between the measured residual variance and the system recursive residual. The simulation results show that the improved filter algorithm can track the changes of the system effectively, enhance the filtering accuracy significantly, and improve the measurement accuracies of train speed and distance.展开更多
Every day we receive a large amount of information through different social media and software,and this data and information can be realized with the advent of data mining methods.In the process of data mining,to solv...Every day we receive a large amount of information through different social media and software,and this data and information can be realized with the advent of data mining methods.In the process of data mining,to solve some high-dimensional problems,feature selection is carried out in limited training samples,and effective features are selected.This paper focuses on two Relief feature selection algorithms:Relief and ReliefF algorithm.The differences between them and their respective applicable scopes are analyzed.Based on Relief algorithm,the high weight feature subset is obtained,and the correlation between features is calculated according to the mutual information distance measure,and the high redundant features are removed to obtain the feature subset with higher quality.Experimental results on six datasets show the effectiveness of our method.展开更多
This paper introduces a new aggregation model by using induced and heavy aggregation operators in distances measures such as the Hamming distance.It is called the induced heavy ordered weighted averaging(OWA) dista...This paper introduces a new aggregation model by using induced and heavy aggregation operators in distances measures such as the Hamming distance.It is called the induced heavy ordered weighted averaging(OWA) distance(IHOWAD) operator.This paper studies some of its main properties and a wide range of particular cases such as the induced heavy OWA(IHOWA) operator,the induced OWA distance(IOWAD) operator and the heavy OWA distance(HOWAD) operator.This approach is generalized by using generalized and quasi-arithmetic means obtaining the induced generalized IHOWAD(IGHOWAD) operator and the Quasi-IHOWAD operator.An application of the new approach in a decision making problem regarding the selection of strategies is developed.展开更多
This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter (IDM). A simple and robust set-up is used to measure distance of about 12 cm with an expanded un...This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter (IDM). A simple and robust set-up is used to measure distance of about 12 cm with an expanded uncertainty ( k = 2) of ±16.4 μm. The measurement uncertainty is found to be limited by the wavelength measurement accuracy. This set-up can be used to measure distances up to 56 m. It also enables easy determination of the point of equal path difference between the measuring and the reference arms. LabVIEW program is used for counting of the fringes and applying fast Fourier transfor- mation (FFT) to perform frequency selective filtration to the noise. Although the reported uncertainty does not represent the state-of-art uncertainty reached for similar distance, the measurement provides traceable measurement to the unit of length, the meter.展开更多
This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading (FPSO) facilities. The authors have developed a distance...This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading (FPSO) facilities. The authors have developed a distance measurement system that consists of two rotatable cameras on a ship and a target on a wharf for the automatic berthing of ships. This system measures a distance by detecting and tracking the target on the wharf using the two rotatable cameras on the ship. Our goal is to apply this distance measurement system to an automatic relative positioning system for a ship at an FPSO facility. In this application, the shape of the target in the images captured by the cameras is deformed by their relative positions and attitudes, which increases the measurement errors. To solve this problem, we propose a target detection method that improves the target deformations. The proposed target detection method is able to detect the deformed targets using a target database that is created by image conversion with the perspective projection of a reference target. By using the proposed target detection method, the distance measurement error is decreased. Experimental results on a miniature scale and in an indoor environment confirmed that the measurement error of the relative distance is decreased by using the proposed target detection method.展开更多
Fidelity plays an important role in quantum information processing,which provides a basic scale for comparing two quantum states.At present,one of the most commonly used fidelities is Uhlmann-Jozsa(U-J)fidelity.Howeve...Fidelity plays an important role in quantum information processing,which provides a basic scale for comparing two quantum states.At present,one of the most commonly used fidelities is Uhlmann-Jozsa(U-J)fidelity.However,U-J fidelity needs to calculate the square root of the matrix,which is not trivial in the case of large or infinite density matrices.Moreover,U-J fidelity is a measure of overlap,which has limitations in some cases and cannot reflect the similarity between quantum states well.Therefore,a novel quantum fidelity measure called quantum Tanimoto coefficient(QTC)fidelity is proposed in this paper.Unlike other existing fidelities,QTC fidelity not only considers the overlap between quantum states,but also takes into account the separation between quantum states for the first time,which leads to a better performance of measure.Specifically,we discuss the properties of the proposed QTC fidelity.QTC fidelity is compared with some existing fidelities through specific examples,which reflects the effectiveness and advantages of QTC fidelity.In addition,based on the QTC fidelity,three discrimination coefficients d_(1)^(QTC),d_(2)^(QTC),and d_^(3)^(QTC)are defined to measure the difference between quantum states.It is proved that the discrimination coefficient d_(3)^(QTC)is a true metric.Finally,we apply the proposed QTC fidelity-based discrimination coefficients to measure the entanglement of quantum states to show their practicability.展开更多
Industrial control systems(ICSs)are widely used in various fields,and the information security problems of ICSs are increasingly serious.The existing evaluation methods fail to describe the uncertain evaluation inform...Industrial control systems(ICSs)are widely used in various fields,and the information security problems of ICSs are increasingly serious.The existing evaluation methods fail to describe the uncertain evaluation information and group evaluation information of experts.Thus,this paper introduces the probabilistic linguistic term sets(PLTSs)to model the evaluation information of experts.Meanwhile,we propose a probabilistic linguistic multi-criteria decision-making(PL-MCDM)method to solve the information security assessment problem of ICSs.Firstly,we propose a novel subscript equivalence distance measure of PLTSs to improve the existing methods.Secondly,we use the Best Worst Method(BWM)method and Criteria Importance Through Inter-criteria Correlation(CRITIC)method to obtain the subjective weights and objective weights,which are used to derive the combined weights.Thirdly,we use the subscript equivalence distance measure method and the combined weight method to improve the probabilistic linguistic Visekriterijumska Optimizacija I Kompromisno Resenje(PL-VIKOR)method.Finally,we apply the proposed method to solve the information security assessment problem of ICSs.When comparing with the existing methods such as the probabilistic linguistic Tomada deDecisão Iterativa Multicritério(PL-TODIM)method and probabilistic linguistic Technique for Order Preference by Similarity to Ideal Solution(PL-TOPSIS)method,the case example shows that the proposed method can provide more reasonable ranking results.By evaluating and ranking the information security level of different ICSs,managers can identify problems in time and guide their work better.展开更多
In this work,we propose a method using frequency-modulated continuous-wave(FMCW)self-mixing interferometry(SMI)and all-phase fast Fourier transform(APFFT)for simultaneous measurement of speed and distance.APFFT offers...In this work,we propose a method using frequency-modulated continuous-wave(FMCW)self-mixing interferometry(SMI)and all-phase fast Fourier transform(APFFT)for simultaneous measurement of speed and distance.APFFT offers superior accuracy in frequency determination by mitigating issues like the fence effect and spectrum leakage,contributing to the high-accuracy measurement for speed and distance.Both simulations and experiments have demonstrated relative errors at the levels of 10^(−4) and 10^(−3) for distance and speed measurements,respectively.Furthermore,factors impacting measurement performance have been discussed.The proposed method provides a high-performance and cost-effective solution for distance and speed measurements,applicable across scientific research and various industrial domains.展开更多
Distance measures between exact linguistic variables and between uncertain linguistic variables are introduced respectively. Based on exact linguistic variables and uncertain linguistic variables, the concepts of posi...Distance measures between exact linguistic variables and between uncertain linguistic variables are introduced respectively. Based on exact linguistic variables and uncertain linguistic variables, the concepts of positive linguistic ideal solution and negative linguistic ideal solution of attribute values are defined. To rank and select alternatives, based on the distance measures of two types of linguistic variables and the linguistic ideal solutions, a method for multiple attribute decision making with different types of linguistic information is proposed, by which all alternatives can be ranked. The method can carry out linguistic computation processes easily without loss of linguistic information, and thus makes the decision result reasonable and effective. Finally, the implementation process of the proposed method is illustrated and analyzed by a numerical example.展开更多
Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and po...Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and powerful tool for metrology and industry,but the measurement speed is often at a kilohertz level due to the lower repetition rates.Recently,dual-microcomb ranging has given rise to a new opportunity for distance measurement,in consequence of its small footprint and high repetition rates,but full-comb stabilization is challenging.Here,we report a dual-hybrid-comb distance meter capable of ultrarapid and submicrometer precision distance measurement,which can not only leverage the advantage of easy locking inherited from the fiber comb but also sustain ultrarapid measurement speed due to the microcomb.The experimental results show that the measurement precision can reach 3.572μm at 4.136μs and 432 nm at 827.2μs averaging time.Benefiting from the large difference between the repetition rates of the hybrid combs,the measurement speed can be enhanced by 196 folds,in contrast to the dual-fiber-comb system with about a 250 MHz repetition rate.Our work can offer a solution for the fields of rapid dimensional measurement and spectroscopy.展开更多
An advanced fuzzy C-mean (FCM) algorithm was proposed for the efficient regional clustering of multi-nodes interconnected systems. Due to various locational prices and regional coherencies for each node and point, m...An advanced fuzzy C-mean (FCM) algorithm was proposed for the efficient regional clustering of multi-nodes interconnected systems. Due to various locational prices and regional coherencies for each node and point, modified similarity measure was considered to gather nodes having similar characteristics. The similarity measure was needed to contain locafi0nal prices as well as regional coherency. In order to consider the two properties simultaneously, distance measure of fuzzy C-mean algorithm had to be modified. Regional clustering algorithm for interconnected power systems was designed based on the modified fuzzy C-mean algorithm. The proposed algorithm produces proper classification for the interconnected power system and the results are demonstrated in the example of IEEE 39-bus interconnected electricity system.展开更多
Fuzzy entropy was designed for non convex fuzzy membership function using well known Hamming distance measure.The proposed fuzzy entropy had the same structure as that of convex fuzzy membership case.Design procedure ...Fuzzy entropy was designed for non convex fuzzy membership function using well known Hamming distance measure.The proposed fuzzy entropy had the same structure as that of convex fuzzy membership case.Design procedure of fuzzy entropy was proposed by considering fuzzy membership through distance measure,and the obtained results contained more flexibility than the general fuzzy membership function.Furthermore,characteristic analyses for non convex function were also illustrated.Analyses on the mutual information were carried out through the proposed fuzzy entropy and similarity measure,which was also dual structure of fuzzy entropy.By the illustrative example,mutual information was discussed.展开更多
This paper is concerned with a technique for order performance by similarity to ideal solution(TOPSIS) method for fuzzy multi-attribute decision making,in which the information about attribute weights is partly know...This paper is concerned with a technique for order performance by similarity to ideal solution(TOPSIS) method for fuzzy multi-attribute decision making,in which the information about attribute weights is partly known and the attribute values take form of triangular fuzzy numbers.Considering the fact that the triangular fuzzy TOPSIS results yielded by different distance measures are different from others,a comparative analysis of triangular fuzzy TOPSIS ranking from each distance measure is illustrated with discussion on standard deviation.By applying the most reasonable distance,the deviation degrees between attribute values are measured.A linear programming model based on the maximal deviation of weighted attribute values is established to obtain the attribute weights.Therefore,alternatives are ranked by using TOPSIS method.Finally,a numerical example is given to show the feasibility and effectiveness of the method.展开更多
基金supported by Shanghai Pujiang Program (No.2019PJC062)the Natural Science Foundation of Shandong Province (No.ZR2021MG003)the Research Project on Undergraduate Teaching Reform of Higher Education in Shandong Province (No.Z2021046).
文摘The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.
基金supported by the National Natural Science Foundation of China under Grant 62072256Natural Science Foundation of Nanjing University of Posts and Telecommunications(Grant Nos.NY221057,NY220003).
文摘Unmanned Aerial Vehicle(UAV)tracking has been possible because of the growth of intelligent information technology in smart cities,making it simple to gather data at any time by dynamically monitoring events,people,the environment,and other aspects in the city.The traditional filter creates a model to address the boundary effect and time filter degradation issues in UAV tracking operations.But these methods ignore the loss of data integrity terms since they are overly dependent on numerous explicit previous regularization terms.In light of the aforementioned issues,this work suggests a dual-domain Jensen-Shannon divergence correlation filter(DJSCF)model address the probability-based distance measuring issue in the event of filter degradation.The two-domain weighting matrix and JS divergence constraint are combined to lessen the impact of sample imbalance and distortion.Two new tracking models that are based on the perspectives of the actual probability filter distribution and observation probability filter distribution are proposed to translate the statistical distance in the online tracking model into response fitting.The model is roughly transformed into a linear equality constraint issue in the iterative solution,which is then solved by the alternate direction multiplier method(ADMM).The usefulness and superiority of the suggested strategy have been shown by a vast number of experimental findings.
基金funded by Hanoi University of Industry under Grant Number 27-2022-RD/HD-DHCN (URL:https://www.haui.edu.vn/).
文摘Attribute reduction,also known as feature selection,for decision information systems is one of the most pivotal issues in machine learning and data mining.Approaches based on the rough set theory and some extensions were proved to be efficient for dealing with the problemof attribute reduction.Unfortunately,the intuitionistic fuzzy sets based methods have not received much interest,while these methods are well-known as a very powerful approach to noisy decision tables,i.e.,data tables with the low initial classification accuracy.Therefore,this paper provides a novel incremental attribute reductionmethod to dealmore effectivelywith noisy decision tables,especially for highdimensional ones.In particular,we define a new reduct and then design an original attribute reduction method based on the distance measure between two intuitionistic fuzzy partitions.It should be noted that the intuitionistic fuzzypartitiondistance iswell-knownas aneffectivemeasure todetermine important attributes.More interestingly,an incremental formula is also developed to quickly compute the intuitionistic fuzzy partition distance in case when the decision table increases in the number of objects.This formula is then applied to construct an incremental attribute reduction algorithm for handling such dynamic tables.Besides,some experiments are conducted on real datasets to show that our method is far superior to the fuzzy rough set based methods in terms of the size of reduct and the classification accuracy.
文摘A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright spot is pegged on the object to be measured and imaged to the target of CCD camera through a telescopic lens. The CCD target converts the optical signal to equivalent electric signal. The video frequency signal is digitized to an array of 512×512 pixels by the analog to digital converter (ADC), then transmitted to the computer. The computer controls the data acquisition, conducts image processing and detects the location of the target spot. Comparing the current position with the original position of the spot, the displacement of object is obtained. With the aid of analysis software, the system can achieve the resolution of 0 01 mm in the 6 m distance from the object to the point of observation. To meet the need of practice, the measuring distance can be extended to 100 m or even farther.
文摘Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is difficult to use the traditional probability theory to process the samples and assess the degree of uncertainty. Using the grey relational theory and the norm theory, the grey distance information approach, which is based on the grey distance information quantity of a sample and the average grey distance information quantity of the samples, is proposed in this article. The definitions of the grey distance information quantity of a sample and the average grey distance information quantity of the samples, with their characteristics and algorithms, are introduced. The correlative problems, including the algorithm of estimated value, the standard deviation, and the acceptance and rejection criteria of the samples and estimated results, are also proposed. Moreover, the information whitening ratio is introduced to select the weight algorithm and to compare the different samples. Several examples are given to demonstrate the application of the proposed approach. The examples show that the proposed approach, which has no demand for the probability distribution of small samples, is feasible and effective.
文摘This paper aims to introduce the novel concept of the bipolar picture fuzzy set(BPFS)as a hybrid structure of bipolar fuzzy set(BFS)and picture fuzzy set(PFS).BPFS is a new kind of fuzzy sets to deal with bipolarity(both positive and negative aspects)to each membership degree(belonging-ness),neutral membership(not decided),and non-membership degree(refusal).In this article,some basic properties of bipolar picture fuzzy sets(BPFSs)and their fundamental operations are introduced.The score function,accuracy function and certainty function are suggested to discuss the comparability of bipolar picture fuzzy numbers(BPFNs).Additionally,the concept of new distance measures of BPFSs is presented to discuss geometrical properties of BPFSs.In the context of BPFSs,certain aggregation operators(AOs)named as“bipolar picture fuzzy weighted geometric(BPFWG)operator,bipolar picture fuzzy ordered weighted geometric(BPFOWG)operator and bipolar picture fuzzy hybrid geometric(BPFHG)operator”are defined for information aggregation of BPFNs.Based on the proposed AOs,a new multicriteria decision-making(MCDM)approach is proposed to address uncertain real-life situations.Finally,a practical application of proposed methodology is also illustrated to discuss its feasibility and applicability.
文摘Distance estimation can be achieved by using active sensors or with the help of passive sensors such as cameras.The stereo vision system is generally composed of two cameras to mimic the human binocular vision.In this paper,a Python-based algorithm is pro-posed to find the parameters of each camera,rectify the images,create the disparity maps and finally use these maps for distance measurements.Experiments using real-time im-ages,which were captured from our stereo vision system,of different obstacles posi-tioned at multiple distances(60-200 cm)prove the effectiveness of the proposed program and show that the calculated distance to the obstacle is relatively accurate.The accuracy of distance measurement is up to 99.83%.The processing time needed to calculate the distance between the obstacle and the cameras is less than 0.355 s.
基金National Natural Science Foundation of China(Nos.61763023,61164010)
文摘The measurement accuracy of speed and distance in high speed train directly affects the control precision and driving efficiency of train control system. To improve the capability of train self control, a combined speed measurement and positioning method based on speed sensor and radar which is assisted by global positioning system(GPS) is proposed to improve the accuracy of measurement and reduce the dependence on the ground equipment. In consideration of the fact that the filtering precision of Kalman filter will decrease when the statistical characteristics are changing, this paper uses fuzzy comprehensive evaluation method to evaluate the sub filter, and information distribution coefficients are dynamically adjusted according to filtering reliability, which can improve the fusion accuracy and fault tolerance of the system. The sub filter is required to carry on the covariance shaping adaptive filtering when it is in the suboptimal state. The adjustment factor of error covariance is obtained according to the minimized cost function, which can improve the matching degree between the measured residual variance and the system recursive residual. The simulation results show that the improved filter algorithm can track the changes of the system effectively, enhance the filtering accuracy significantly, and improve the measurement accuracies of train speed and distance.
文摘Every day we receive a large amount of information through different social media and software,and this data and information can be realized with the advent of data mining methods.In the process of data mining,to solve some high-dimensional problems,feature selection is carried out in limited training samples,and effective features are selected.This paper focuses on two Relief feature selection algorithms:Relief and ReliefF algorithm.The differences between them and their respective applicable scopes are analyzed.Based on Relief algorithm,the high weight feature subset is obtained,and the correlation between features is calculated according to the mutual information distance measure,and the high redundant features are removed to obtain the feature subset with higher quality.Experimental results on six datasets show the effectiveness of our method.
基金supported by the projects JC2009-00189 and A/023879/09 from the Spanish Ministry of Science and Innovation
文摘This paper introduces a new aggregation model by using induced and heavy aggregation operators in distances measures such as the Hamming distance.It is called the induced heavy ordered weighted averaging(OWA) distance(IHOWAD) operator.This paper studies some of its main properties and a wide range of particular cases such as the induced heavy OWA(IHOWA) operator,the induced OWA distance(IOWAD) operator and the heavy OWA distance(HOWAD) operator.This approach is generalized by using generalized and quasi-arithmetic means obtaining the induced generalized IHOWAD(IGHOWAD) operator and the Quasi-IHOWAD operator.An application of the new approach in a decision making problem regarding the selection of strategies is developed.
文摘This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter (IDM). A simple and robust set-up is used to measure distance of about 12 cm with an expanded uncertainty ( k = 2) of ±16.4 μm. The measurement uncertainty is found to be limited by the wavelength measurement accuracy. This set-up can be used to measure distances up to 56 m. It also enables easy determination of the point of equal path difference between the measuring and the reference arms. LabVIEW program is used for counting of the fringes and applying fast Fourier transfor- mation (FFT) to perform frequency selective filtration to the noise. Although the reported uncertainty does not represent the state-of-art uncertainty reached for similar distance, the measurement provides traceable measurement to the unit of length, the meter.
文摘This paper describes target detection improvement in a distance measurement system using two rotatable cameras for floating production, storage and offloading (FPSO) facilities. The authors have developed a distance measurement system that consists of two rotatable cameras on a ship and a target on a wharf for the automatic berthing of ships. This system measures a distance by detecting and tracking the target on the wharf using the two rotatable cameras on the ship. Our goal is to apply this distance measurement system to an automatic relative positioning system for a ship at an FPSO facility. In this application, the shape of the target in the images captured by the cameras is deformed by their relative positions and attitudes, which increases the measurement errors. To solve this problem, we propose a target detection method that improves the target deformations. The proposed target detection method is able to detect the deformed targets using a target database that is created by image conversion with the perspective projection of a reference target. By using the proposed target detection method, the distance measurement error is decreased. Experimental results on a miniature scale and in an indoor environment confirmed that the measurement error of the relative distance is decreased by using the proposed target detection method.
基金supported by the National Natural Science Foundation of China(62003280,61976120)Chongqing Talents:Exceptional Young Talents Project(cstc2022ycjh-bgzxm0070)+2 种基金Natural Science Foundation of Chongqing(2022NSCQ-MSX2993)Natural Science Key Foundation of Jiangsu Education Department(21KJA510004)Chongqing Overseas Scholars Innovation Program(cx2022024)。
文摘Fidelity plays an important role in quantum information processing,which provides a basic scale for comparing two quantum states.At present,one of the most commonly used fidelities is Uhlmann-Jozsa(U-J)fidelity.However,U-J fidelity needs to calculate the square root of the matrix,which is not trivial in the case of large or infinite density matrices.Moreover,U-J fidelity is a measure of overlap,which has limitations in some cases and cannot reflect the similarity between quantum states well.Therefore,a novel quantum fidelity measure called quantum Tanimoto coefficient(QTC)fidelity is proposed in this paper.Unlike other existing fidelities,QTC fidelity not only considers the overlap between quantum states,but also takes into account the separation between quantum states for the first time,which leads to a better performance of measure.Specifically,we discuss the properties of the proposed QTC fidelity.QTC fidelity is compared with some existing fidelities through specific examples,which reflects the effectiveness and advantages of QTC fidelity.In addition,based on the QTC fidelity,three discrimination coefficients d_(1)^(QTC),d_(2)^(QTC),and d_^(3)^(QTC)are defined to measure the difference between quantum states.It is proved that the discrimination coefficient d_(3)^(QTC)is a true metric.Finally,we apply the proposed QTC fidelity-based discrimination coefficients to measure the entanglement of quantum states to show their practicability.
文摘Industrial control systems(ICSs)are widely used in various fields,and the information security problems of ICSs are increasingly serious.The existing evaluation methods fail to describe the uncertain evaluation information and group evaluation information of experts.Thus,this paper introduces the probabilistic linguistic term sets(PLTSs)to model the evaluation information of experts.Meanwhile,we propose a probabilistic linguistic multi-criteria decision-making(PL-MCDM)method to solve the information security assessment problem of ICSs.Firstly,we propose a novel subscript equivalence distance measure of PLTSs to improve the existing methods.Secondly,we use the Best Worst Method(BWM)method and Criteria Importance Through Inter-criteria Correlation(CRITIC)method to obtain the subjective weights and objective weights,which are used to derive the combined weights.Thirdly,we use the subscript equivalence distance measure method and the combined weight method to improve the probabilistic linguistic Visekriterijumska Optimizacija I Kompromisno Resenje(PL-VIKOR)method.Finally,we apply the proposed method to solve the information security assessment problem of ICSs.When comparing with the existing methods such as the probabilistic linguistic Tomada deDecisão Iterativa Multicritério(PL-TODIM)method and probabilistic linguistic Technique for Order Preference by Similarity to Ideal Solution(PL-TOPSIS)method,the case example shows that the proposed method can provide more reasonable ranking results.By evaluating and ranking the information security level of different ICSs,managers can identify problems in time and guide their work better.
基金supported by the National Natural Science Foundation of China(No.62005234)the China Scholarship Council Post-Doctoral Program(No.202107230002)the Natural Science Foundation of Hunan Province(No.2024JJ6434).
文摘In this work,we propose a method using frequency-modulated continuous-wave(FMCW)self-mixing interferometry(SMI)and all-phase fast Fourier transform(APFFT)for simultaneous measurement of speed and distance.APFFT offers superior accuracy in frequency determination by mitigating issues like the fence effect and spectrum leakage,contributing to the high-accuracy measurement for speed and distance.Both simulations and experiments have demonstrated relative errors at the levels of 10^(−4) and 10^(−3) for distance and speed measurements,respectively.Furthermore,factors impacting measurement performance have been discussed.The proposed method provides a high-performance and cost-effective solution for distance and speed measurements,applicable across scientific research and various industrial domains.
基金The National Natural Science Foundation of China(Nos.70571087,70472033).
文摘Distance measures between exact linguistic variables and between uncertain linguistic variables are introduced respectively. Based on exact linguistic variables and uncertain linguistic variables, the concepts of positive linguistic ideal solution and negative linguistic ideal solution of attribute values are defined. To rank and select alternatives, based on the distance measures of two types of linguistic variables and the linguistic ideal solutions, a method for multiple attribute decision making with different types of linguistic information is proposed, by which all alternatives can be ranked. The method can carry out linguistic computation processes easily without loss of linguistic information, and thus makes the decision result reasonable and effective. Finally, the implementation process of the proposed method is illustrated and analyzed by a numerical example.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB2800603)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-069)+1 种基金the National Natural Science Foundation of China(Grant Nos.62075238 and 12275093)the Innovation Program for Quantum Science and Technology(Grant Nos.2021ZD0301500 and 2021ZD0300701).
文摘Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and powerful tool for metrology and industry,but the measurement speed is often at a kilohertz level due to the lower repetition rates.Recently,dual-microcomb ranging has given rise to a new opportunity for distance measurement,in consequence of its small footprint and high repetition rates,but full-comb stabilization is challenging.Here,we report a dual-hybrid-comb distance meter capable of ultrarapid and submicrometer precision distance measurement,which can not only leverage the advantage of easy locking inherited from the fiber comb but also sustain ultrarapid measurement speed due to the microcomb.The experimental results show that the measurement precision can reach 3.572μm at 4.136μs and 432 nm at 827.2μs averaging time.Benefiting from the large difference between the repetition rates of the hybrid combs,the measurement speed can be enhanced by 196 folds,in contrast to the dual-fiber-comb system with about a 250 MHz repetition rate.Our work can offer a solution for the fields of rapid dimensional measurement and spectroscopy.
基金Work supported by the Second Stage of Brain Korea 21 ProjectsWork(2010-0020163) supported by Priority Research Centers Program through the National Research Foundation (NRF) funded by the Ministry of Education,Science and Technology of Korea
文摘An advanced fuzzy C-mean (FCM) algorithm was proposed for the efficient regional clustering of multi-nodes interconnected systems. Due to various locational prices and regional coherencies for each node and point, modified similarity measure was considered to gather nodes having similar characteristics. The similarity measure was needed to contain locafi0nal prices as well as regional coherency. In order to consider the two properties simultaneously, distance measure of fuzzy C-mean algorithm had to be modified. Regional clustering algorithm for interconnected power systems was designed based on the modified fuzzy C-mean algorithm. The proposed algorithm produces proper classification for the interconnected power system and the results are demonstrated in the example of IEEE 39-bus interconnected electricity system.
基金Work supported by the Second Stage of Brain Korea 21 Projects Work(2010-0020163) supported by the Priority Research Centers Program through the National Research Foundation (NRF) funded by the Ministry of Education,Science and Technology of Korea
文摘Fuzzy entropy was designed for non convex fuzzy membership function using well known Hamming distance measure.The proposed fuzzy entropy had the same structure as that of convex fuzzy membership case.Design procedure of fuzzy entropy was proposed by considering fuzzy membership through distance measure,and the obtained results contained more flexibility than the general fuzzy membership function.Furthermore,characteristic analyses for non convex function were also illustrated.Analyses on the mutual information were carried out through the proposed fuzzy entropy and similarity measure,which was also dual structure of fuzzy entropy.By the illustrative example,mutual information was discussed.
基金supported by the National Natural Science Foundation of China (70473037)the Key Project of National Development and Reform Commission (1009-213011)
文摘This paper is concerned with a technique for order performance by similarity to ideal solution(TOPSIS) method for fuzzy multi-attribute decision making,in which the information about attribute weights is partly known and the attribute values take form of triangular fuzzy numbers.Considering the fact that the triangular fuzzy TOPSIS results yielded by different distance measures are different from others,a comparative analysis of triangular fuzzy TOPSIS ranking from each distance measure is illustrated with discussion on standard deviation.By applying the most reasonable distance,the deviation degrees between attribute values are measured.A linear programming model based on the maximal deviation of weighted attribute values is established to obtain the attribute weights.Therefore,alternatives are ranked by using TOPSIS method.Finally,a numerical example is given to show the feasibility and effectiveness of the method.